>>> 'terminals' problem from phillip -- Wed Jan 18 06:43:15 1989 <<<

The tektronix 4107 in the lobby needs the attention of th Eshop.
It will be brought to them today.

>>> 'terminals' problem from phillip -- Wed Jan 18 09:02:44 1989 <<<

It was decided that the tektronix 4107 terminal be stored for now.
It is in an unusable state with the crt needing work. It is now gone
from the student study area and has been placed in the womens lounge
storage area.
From phillip Mon Jan 30 13:43:28 1989
Received: by argon (5.57/1.16)
	id AA21819; Mon, 30 Jan 89 13:43:24 PST
Date: Mon, 30 Jan 89 13:43:24 PST
From: phillip (Phill Guillory)
Message-Id: <8901302143.AA21819@argon>
To: mudie
Subject: tty 00 & the flatgage
Cc: bob, voros
Status: R

 Hello. The flatgage is now connected to the argon computer.
I repaired the final open port in our lab/rm.490 cable to
make this possible. The only stag you might encounter in my
work is needing a reversal on the line if the polarity is incorrect.

 The flatgage manual is on my desk.      


(R.P.O.   Main cable Supermod 1 - slot 3 connected to
          cable CY3 - slot 4   . Pls. update records
          as appropriate.)
pg

From phillip Mon Jan 30 13:52:05 1989
To: bob voros
Subject: additional ttys in the microlab
Cc: mudie jhopkin  $pf/terminals-p

 Now that the flatgage is on line, we face another decision.
There are no facilities left to add more features from the lab
to the computer eqpt. rm.490.
 There are several ways of approaching this situation. I will
wait on doing anything further until a unilateral approach has
been adopted.
pg


>>> 'terminals' problem from phillip -- Tue Jan 31 11:32:08 1989 <<<

RPO: Rebooted argon @ 7:35am today.
From phillip Wed Feb  1 13:38:07 1989
Received: by argon (5.57/1.16)
	id AA08942; Wed, 1 Feb 89 13:38:03 PST
Date: Wed, 1 Feb 89 13:38:03 PST
From: phillip (Phill Guillory)
Message-Id: <8902012138.AA08942@argon>
To: roberto@janus
Subject: inventory 
Cc: bob, cynthia@east
Status: RO

 Hello. A computer terminal that was in microlab domain has been
transferred to the Eshop permanently. It will most likely be used
just for parts.
  It is a 'Freedom 100' crt and bears the U.C. # 84-10-00959  .

Please make all necessary adjustments to your/the records.
Thank you,
Phillip Guillory


>>> 'terminals' problem from voros -- Wed Feb  8 08:47:34 1989 <<<

Date: Tue, 7 Feb 89 19:50:55 PST
From: weijie (Weijie Yun)
To: voros@argon
Subject: wand problem

All the terminals got stucked around 6:10 this afternoon.
When I tried to login, it gave me a msgs,

 Sorry,  wand got stuck elswhere.
 Try again?

And I can't log out from the lab. Pls check it out.

Thanks.

Weijie
From bob Wed Feb  8 14:26:55 1989
Received: by argon (5.57/1.16)
	id AA21247; Wed, 8 Feb 89 14:26:43 PST
From: bob (Robert M. Hamilton)
Message-Id: <8902082226.AA21247@argon>
To: phillip, voros
Subject: Z-29
Date: Wed, 08 Feb 89 14:26:34 PST
Status: R

I spoke with Dick and asked him to return the terminal and
modem he has at home. This should give us another Z-29.
bob


>>> 'terminals' problem from mudie -- Wed Feb  8 16:50:06 1989 <<<

Problem:  All wands stuck mysteriously.

Cause:  No idea.  I was in the lab when this happened, and I couldn't
	find anything wrong.  wands came back after ~15 minutes
	of waiting and resetting terminals.

Solution:  Nothing done.  If it doesn't happen again, I would call
	it a transient network failure.

>>> 'terminals' problem from bob -- Fri Feb 10 10:36:12 1989 <<<

User reports random characters on screen, gl-4 terminal.

Phil can try and repair this particular terminal. Since the
problem seems intermittent this may be dificult.

There is no term cap on the wand and it is z-29 specific. Zenith
no longer makes z-29's and we have run out of spares. There will 
be some z-29's replaced shortly with graphics terminals and I 
have another z-29 being returned which is in good working order. 
If repairs fail a new terminal will be installed. It will be
a few days before this spare is returned.

bob

>>> 'terminals' problem from phillip -- Fri Feb 10 13:57:25 1989 <<<

Temporary situation: The terminal in GL4 (normally tty10) has been
moved to tty13. If this terminal needs resetting, it should be done
using port i.d.  tty13  .

The oldlab tty13 has been moved to tty10. If this terminal has 
to be reset, use protocol for tty10 .

Please apprise this problem file if/when either of these needs
resetting. Trouble isolation is occurring with the swaps.

(Dave,James, you need do nothing concerning this message.)

>>> 'terminals' problem from robin -- Wed Feb 15 14:17:39 1989 <<<

Tycom terminal in 421 does not respond to keyboard.

>>> 'terminals' problem from phillip -- Wed Feb 15 14:37:42 1989 <<<

P: tycom office terminal o.d.
S: Manually reset terminal. This crt is back on-line.

>>> 'terminals' problem from phillip -- Thu Feb 23 13:28:17 1989 <<<

Concerning the ongoing problem with the z29 in GL4:

1. The channel between CG4 and the tauruschase was changed
   on suspicion.
2. The ports were put back as they were to correspond to the
   treset program.
3. A #6116 ic was replaced to eliminate random characters.

This terminal should be o.k. now. PLEASE apprise this problem
file if further trouble is encountered. 

>>> 'terminals' problem from parrish -- Mon Mar 13 08:33:18 1989 <<<

P: The argon terminal in the gas storage room is not working.
   (pg)
From richard Tue Mar 14 11:27:55 1989
Received: by argon (5.57/1.16)
	id AA14538; Tue, 14 Mar 89 11:27:52 PST
Date: Tue, 14 Mar 89 11:27:52 PST
From: richard (Richard Hsu)
Message-Id: <8903141927.AA14538@argon>
To: bob, partlo, phillip, spence
Subject: terminals comments 
Status: RO

The Z29 in GL-4 required resetting this morning--the first time
necessary since the ports were returned to their original configuration
and the #6116 ic was replaced.

No random characters were seen; the terminal was simply locked up
(no prompt, would not respond to any commands).


>>> 'terminals' problem from mudie -- Wed Mar 15 19:55:37 1989 <<<

P: Terminal in 432-E non-functional.

C: Terminal driver argon:tty1f stopped working

S: Terminal reconnected to argon:tty16

>>> 'terminals' problem from phillip -- Thu Mar 16 13:39:45 1989 <<<

CSSG is ready for us to run the 100 pr. cable into rm.490 .
They will make it continous from the patch panel in 490 to
the new machine 'radon' . 
 Is Jules firm on working during his vacation? Is he committed 
to running the cable?
pg

>>> 'terminals' problem from phillip -- Tue Mar 28 10:29:23 1989 <<<

Replaced rs232 connector that was crushed during the painting.
The terminal closest to the doors of the oldlab is working again.

>>> 'terminals' problem from lyons -- Thu Mar 30 14:42:19 1989 <<<

How come sometimes I go to start up the wand on some terminals
and after I give my password the screen is cleared but then the
terminal locks up?  Then I go to a different terminal after waiting
several minutes and it works, although it thinks I am logged in
at the first terminal.  It's intermittant.

>>> 'terminals' problem from voros -- Mon Apr  3 09:43:19 1989 <<<

From: spivey (Rosemary Spivey)
To: mudie
Cc: voros
Subject: reception area terminal
Date: Mon, 03 Apr 89 09:41:09 PDT

Terminal tty18 (reception area) will not accept logins.  It gives users the
message "unknown password".  I tried to reset it and received the message,
"unable to open mmouse lock file /tmp/mouse".  Please see what you can do
about this problem and reply to Katalin.

Thanks very much.
Rosemary

>>> 'terminals' problem from spivey -- Mon Apr  3 11:05:11 1989 <<<

Terminal reset by phillip. Lab login terminal is on line again.

>>> 'terminals' problem from phillip -- Fri Apr  7 08:22:28 1989 <<<

Reconnected terminal on Jules' desk to network. 
(Jules & James, what is the status of the terminal on the
 floor by Jules' desk?? pls. apprise.)

>>> 'terminals' problem from bob -- Tue Apr 25 09:03:02 1989 <<<

The ckout terminal in the storage area is on its way out and needs to
be replaced with a working terminal.

>>> 'terminals' problem from phillip -- Fri Apr 28 11:37:44 1989 <<<

Replaced Z19 in gas storage room with same type of terminal.
This repairs the problem of the wavering screen as reported by Bob.

>>> 'terminals' problem from bob -- Thu May 18 13:13:22 1989 <<<

Krypton is continuously reporting "ether net cable problem" "no carrier"

>>> 'terminals' problem from mudie -- Thu May 18 15:18:15 1989 <<<

Problem:  "no carrier" on krypton's ethernet connection

Cause:  Ethernet connection loose on the backplane

Solution:  jhopkin wiggled the wires.

>>> 'terminals' problem from bob -- Mon Jul  3 13:10:25 1989 <<<

The tycom termianl in the student area appears to be screwed up.

>>> 'terminals' problem from phillip -- Wed Jul  5 08:27:50 1989 <<<

P: Reception tycom terminal o.d.
S: Found open jumper in CV2 @ the tycom breakout
   box. Reinstated jumper. Terminal is back on-line.

>>> 'terminals' problem from scotts -- Tue Jul 25 11:02:02 1989 <<<

I have a problem to report on the livingstone tty11 terminal
in Y1.  It has been locked? keyboard echos garbage, since the 
evening of 7/24/89.  Gamlen reported to me the above, I report the
problem to BOB H. on the morning of 7/25/89, at that time he 
tried to reset the terminal remotely.  This did not work. 
Thank You.

>>> 'terminals' problem from phillip -- Fri Jul 28 08:24:33 1989 <<<

P: Zenith argon terminal in Y1 not working.
S: Closed an open patch cord in channel 6 of
   the CY1 data cable. This terminal is back
   on line.

>>> 'terminals' problem from phillip -- Mon Aug  7 08:47:43 1989 <<<

P: Argon  crashed.
S: Rebooted machine. The sun came up only afer the 4 disc drives
   were 'start cycled'.
   Radon,livingstone, and argon are on-line.

>>> 'terminals' problem from phillip -- Fri Aug 11 08:47:22 1989 <<<

P: The 2 F200 terminals in Mlab inventory have been removed
   to the Eshop for repair. There is no estimate yet of $$
   or time required to fix them.

>>> 'terminals' problem from phillip -- Wed Aug 16 14:06:39 1989 <<<

Picked up 2 F200's that have been repaired from the Eshop.
Was not told the $$ to fix them.

One F200 has been connected to 'gold' in the lobby and runs a
getty (same as the  office terminals).


The is in our reserve terminal inventory:

ONE  (1)   Z29 keyboard
FOUR (4)   Z29 consoles

ONE (1)    Z19 terminal

ONE (!)    F200 console & keyboard

>>> 'terminals' problem from phillip -- Mon Aug 28 11:06:55 1989 <<<

Replaced Z19 with same in the gas storage room.

>>> 'terminals' problem from phillip -- Tue Sep 12 08:29:12 1989 <<<

The Z19 in the gas storage rm. is acting up because of a 
software problem. Lauren is aware of the problem.

>>> 'terminals' problem from phillip -- Wed Sep 13 06:50:04 1989 <<<

Gas room terminal is ok.
Reported problem caused by an individual account.

>>> 'terminals' problem from phillip -- Tue Sep 26 06:26:15 1989 <<<

Rebooted Livingstone this a.m. 

>>> 'terminals' problem from phillip -- Mon Oct  2 06:34:23 1989 <<<

Oweing to the office change, the lab study area ADM running the
tycom will be OUT OF ORDER until further notice.

>>> 'terminals' problem from tom -- Mon Oct  2 09:48:29 1989 <<<

Terminal by iona is not powered. It is plugged into iona and iona is
off.  Could you please provide power for it. Thanks, SuperDuperTechMan.

>>> 'terminals' problem from bob -- Mon Oct  2 14:34:15 1989 <<<

The terminal by iona is being moved to Rm 413. Please use the workstation
located in the area.

>>> 'terminals' problem from phillip -- Wed Oct  4 10:30:12 1989 <<<

P: 'tytalk' is down. The link between the tycom computer and the port 'a'
   of krypton is apparently o.k.
   Lauren, can you make sure that port 'a' is active in krypton?

>>> 'terminals' problem from mudie -- Wed Oct  4 12:55:23 1989 <<<

tytalk works for me.  Phill, can you check the problem again?

Also, should there be an "interface" or "software" equipment to
report such problems on?  "tylans" is kind of appropriate for
tytalk, but none too obvious, and the mail will not reach programmers.

>>> 'terminals' problem from phillip -- Wed Oct  4 13:30:23 1989 <<<

The 'tytalk' feature of argon/tycom is running again.
It is uncertain at this time what caused the outage.

>>> 'terminals' problem from phillip -- Wed Oct 11 12:56:12 1989 <<<

Removed "ADM" from rm.413 and placed it in the 143lab on the
'nanospec'.

Installed temp. terminal in rm.413 as the 'ADM' would not
run a wand.

(Lauren, would you please change the "ADM" emulation on /dev/tty0b
to a z29a ? All the other info I gave you yesterday remains the same.
 Sorry about that!)

>>> 'terminals' problem from hebert -- Mon Nov  6 08:17:00 1989 <<<

If it is possible, can I a an argon port installed on the
Perkin-Elmer computer in GL3?

>>> 'terminals' problem from rnorman -- Mon Nov  6 12:03:57 1989 <<<

One on the terminals in the VLSI lab does not have a TTY lable and
was unable to reset the termial; the one right in front of the tylans.

>>> 'terminals' problem from phillip -- Mon Nov  6 13:07:05 1989 <<<

Reset tty V2 per Robert's report.

>>> 'terminals' problem from rnorman -- Mon Nov  6 13:57:18 1989 <<<

V2 in the VLSI keeps glitching up; this is the 4 time I reset it today.

>>> 'terminals' problem from bob -- Mon Nov  6 15:22:58 1989 <<<

v2 is latching up. Same problem as reporeted by Robert Norman. Resetting
doesn't solve this problem.

>>> 'terminals' problem from phillip -- Tue Nov  7 07:40:48 1989 <<<

P: Terminal locks up getty.
S: Reset 'set up' parameters to proper conditions.It appears
   as if they were tampered with.
This terminal is available for use.

>>> 'terminals' problem from phillip -- Tue Nov 21 14:28:06 1989 <<<

Our computer 'argon' has no more vacant ports to connect to.
A new set of ports will be available to us after 1/3/90
as equipment is on order.
Until then, no new connections to argon are possible.

There are a few desk spaces in rm.406 that will have to wait
until then.

pg
From voros Tue Nov 21 14:25:12 1989
Received: by argon (5.57/1.16)
	id AA01611; Tue, 21 Nov 89 14:25:10 PST
Date: Tue, 21 Nov 89 14:25:10 PST
From: voros (Katalin Voros)
Message-Id: <8911212225.AA01611@argon>
To: bob, phil
Subject: argon extention board
Status: RO

From: spivey (Rosemary Spivey)
To: ljmassa
Cc: voros
Subject: status of Sun order
Date: Tue, 21 Nov 89 13:52:00 PST

A PO# has been assigned to the order for an ALM2, 16 channel asynchronous
multiplexer board.  The number is:  0-232314-EB.  The ETA is 1/3/89.

RS



>>> 'terminals' problem from phillip -- Wed Dec  6 06:56:36 1989 <<<

P: Random characters on  screen.
S: Replaced defecting ic 6116.
   This terminal is fixed.

>>> 'terminals' problem from phillip -- Mon Dec 11 08:26:46 1989 <<<

The 'livingstone' computer dumped early Sunday morning and
never came back on line. It would not take reboot commands
from me.
 In the absence of Lauren, I have referred this problem over
to CSSG for resolution. They responded immediately and are
working on it as of this writing.

>>> 'terminals' problem from phillip -- Thu Dec 14 13:53:33 1989 <<<

Pursuant to the programmer's request for a livingstone console
work surface, a table has been added to the rm.490 machine room.
(Kevin, let me know if you need anything else from me.)

>>> 'terminals' problem from phillip -- Wed Dec 20 09:11:15 1989 <<<

Through cooperative efforts, Scott Miles' new office terminal
is connected 'to the net'. Thanks to Jeff Sigari of CSSG for
his valuable and prompt assistance.
 The terminal now needs software and internal connections
that will provided by Chris Hegarty (?) .

>>> 'terminals' problem from phillip -- Tue Jan  2 07:33:34 1990 <<<

Any word on when 'livingstone' might be back with us?

>>> 'terminals' problem from phillip -- Tue Jan  2 09:42:34 1990 <<<

Problem: There is NO talk daemon between 'argon' and other machines.
         When you type the command 'talk person@janus' for example,
the argon response is 'waiting for your party to respond'. In actuality,
the 'talk' message is not leaving argon. 
 The talk feature is standard(?) between machines.

>>> 'terminals' problem from voros -- Tue Jan  2 16:32:39 1990 <<<

Lauren said the terminals can be used in the lab now. Phil,
would you pls check this. Even if we have to leave the taurus
override on, it will be a big help if users can "enable/disable"
equipment and read the msgs.
Thanks.
	Katalin
From ljmassa Wed Jan  3 01:44:45 1990
Return-Path: <ljmassa>
Received: by argon.berkeley.edu. (4.1/SMI-4.0)
	id AA17815; Wed, 3 Jan 90 01:44:42 PST
Date: Wed, 3 Jan 90 01:44:42 PST
From: ljmassa (Lauren Massa)
Message-Id: <9001030944.AA17815@argon.berkeley.edu.>
To: voros
Subject: terminals
Cc: ljmassa
Status: RO


The plutos are up. Dave helped , there were some bugs in the code.
I had to come back in because livingstone didn't reboot properly, it's
now almost 2am so I may be in a bit late tomorrow. 

I asked Mark to try and dump livingstone tonight, it has been dumped
weekly since it was brought up, but i wanted to have it dumped right away
for obvious reasons.
        Lauren 
 

From phillip Wed Jan  3 08:24:02 1990
To: bob voros
Subject: lab terminals
Cc:  $pf/terminals-p ljmassa


About 1/4 (4 or 5) of the lab terminals do not work. It seems
problematic of being unplugged at the computer. The wand works
on those terminals that are on.

I will look further into the problem.


>>> 'terminals' problem from phillip -- Wed Jan  3 08:50:01 1990 <<<

The terminals that are not working in the lab are oweing
to a software(?) problem. All lab terminals are electrically
continous from the terminal to the computer.

There are working terminals in most areas of the lab.

(Lauren, help!)

>>> 'terminals' problem from phillip -- Thu Jan  4 06:20:40 1990 <<<

The same lab terminals that were not working yesterday
are not working today.
R1, Y1, Y3, AN1, and the oldlab terminals
From ljmassa Tue Jan  9 16:47:39 1990
Return-Path: <ljmassa>
Received: by argon.berkeley.edu. (4.1/SMI-4.0)
	id AA03773; Tue, 9 Jan 90 16:47:36 PST
Date: Tue, 9 Jan 90 16:47:36 PST
From: ljmassa (Lauren Massa)
Message-Id: <9001100047.AA03773@argon.berkeley.edu.>
To: phillip
Subject: argon port sel. tty's
Cc: voros
Status: R


I temporoarily changed tty03, 0a, 13 and 15 and checked with the test terminal.
all came up fine. All also started port selector gettys (when I configured them
back to switch), when connected to the z29. Don't know why they didn't the
first time..

The port selector lines still don't seem to connect you though.  I talked to
Kirk after and his opinion was the same, we should try and narow it down
before talking to CSSG. I have one other thing I want to try and after that
I think I'll have the wiring checked for the port selector.

Can you check the connection from the wall where the port selector lines
are to argon, at least as far as they are above the floor - otherwise
I'll just look at it when I get back.

	Thanks for the help!
        Lauren 
 


>>> 'terminals' problem from phillip -- Wed Jan 10 08:57:57 1990 <<<

The livingstone lab terminal computer is down completely
pending CSSG repairs.

>>> 'terminals' problem from phillip -- Thu Jan 11 07:32:48 1990 <<<

Terminals on tty 8 thru 15 are still not operational in the lab.
CSSG / Pepe is still working on the machine.

>>> 'terminals' problem from phillip -- Thu Jan 11 08:32:45 1990 <<<

The livingstone terminals in the lab are back on line.
The 'tty order' as it perstains to the ''reset'' program
now needs verification to assure our records are correct.
This will be done today.

The work performed by CSSG and related costs have not yet
been ascertained.

>>> 'terminals' problem from bob -- Wed Jan 17 15:54:33 1990 <<<

All terminals in the lab are up and running and the taurus overide
is off. 

>>> 'terminals' problem from phillip -- Thu Jan 18 11:27:22 1990 <<<

CSSG has *disconnected* the argon ports from the Cory port
selector. Pepe has ascertained that one or more of the ports
is erroneously pulling up the Cory port selector 'banner'.
This ties up the selector for all users. The problem is
possibly software.

>>> 'terminals' problem from ljmassa -- Sun Jan 21 00:06:49 1990 <<<

The argon port selector lines have been reconnected. 

>>> 'terminals' problem from bob -- Fri Jan 26 16:28:30 1990 <<<

termianls in vlsi are down and do not reset. v1 and v2.

>>> 'terminals' problem from phillip -- Mon Jan 29 07:06:56 1990 <<<

All lab terminals are working presently.

Since the port board was installed by CSSG, the port locations
as recorded in the 'reset' program do *NOT* match the lab locations.
This will be remidied shortly.

>>> 'terminals' problem from phillip -- Thu Feb  1 08:20:25 1990 <<<

P: Since the livingstone fix by CSSG, our port delivery
   records have been askew. Only 5 of 15 are set correctly.
   This makes it almost impossible to 'reset' terminals.

(lauren, please contact me....thx)

>>> 'terminals' problem from richard -- Thu Feb  1 16:01:22 1990 <<<

the terminal in GL-4, livingstone tty 10, is dead; it does not respond
to the terminal reset routine

>>> 'terminals' problem from phillip -- Fri Feb  2 06:50:31 1990 <<<

P: Terminals in lab locking up. There are at least 6 terminals
   with no getty.
S: Booted livingstone. The terminals should be back on
   within 15 minutes.

>>> 'terminals' problem from phillip -- Fri Feb  2 07:16:01 1990 <<<

The lab terminals are back on now after the
successful reboot of this a.m.

>>> 'terminals' problem from phillip -- Fri Feb  2 13:07:58 1990 <<<

the new argon port board has arrived. It was given over to Pepe
in CSSG for installation. 

Lauren, as far as i can tell, we will not need the wiring crew
to assist in this job. Please correct me if I am wrong.

Pepe/Phil, can you please let us know approximately when the  
new board will be installed and operational?
thx,pg

>>> 'terminals' problem from tom -- Mon Feb 12 09:21:42 1990 <<<

The terminal by the cssem has not worked for a week at least.
No response, just a cursor. Reseting the terminal seems to not work.

>>> 'terminals' problem from voros -- Mon Feb 12 11:41:50 1990 <<<

Date: Mon, 12 Feb 90 11:38:46 PST
From: ljmassa (Lauren Massa)
To: voros
Subject: Re:  terminals in the lab

I'm in the machine room nowThe first time this was reported i made
 sure all the lines matched out
documentation according to the port numbers that are marked on the bcak
of the machine. Apparently those port numbers are incorrect.  Phil checked
all the terminals for me to see which lines are actually connected to
which terminals, and I just swapped the lines to match Phil's list.

All of the plutos are up now, and hopefully the lines now correspond to
the terminals as listed in the treset menu.

        Lauren 
 

>>> 'terminals' problem from phillip -- Mon Feb 12 13:12:31 1990 <<<

The new (Lauren repaired) designations on treset now match
the port that is actually on the terminal.
The only exception to this is tty03 & tty07. This will be remidied
by Lauren shortly.

When CSSG replaced the port board, that fixed tty07 which had
never worked. The port tty07 will be added to 'treset' and
installed in GL3 per Dave Hebert's request. This will be
accomplished this week.

>>> 'terminals' problem from galewski -- Tue Feb 20 00:43:53 1990 <<<

v2 in the vlsi area not working, and will not reset.`

			-Carl

>>> 'terminals' problem from jimmoon -- Thu Feb 22 08:33:45 1990 <<<

Terminals Y2, Y3, and V2 are on the fritz and don't respond
to nuking.  These terminals are getting to be a pain.

>>> 'terminals' problem from ljmassa -- Fri Feb 23 10:36:53 1990 <<<

Rebooted livingstone to fix this.  Has to be looked at in the long
term.  Might be due to wedged plutos that users don't use clruser on.

>>> 'terminals' problem from phillip -- Fri Mar  2 11:02:07 1990 <<<

 Jeff Sigari from CSSG stopped by and informed me that the port
board installation was complete to the wire bay. In trying to
connect a port to the office, I find otherwise.

There are no ports coming from the new RS232's at the back of
the computer.

>>> 'terminals' problem from voros -- Fri Mar  2 14:13:21 1990 <<<

Date: Fri, 2 Mar 90 13:30:48 PST
From: hebert (David Hebert)
To: ljmassa, voros
Subject: Wand

There is a problem with the wand. Regardless of which terminal
I use in the lab to try to access my wand, the terminal tends
to lock-up. This occurs has occurred about 50% of the time today.
Some days it isn't as bad as today. After the terminal locks-up,
I have to go to another terminal, log on, and then I get a message that
states that my wand is at another terminal and that it's being
retrieved. 

Is there anything that can be done to fix this? It's really quite
annoying to have to wander from terminal to terminal trying to access
my wand as I work in the lab.

DH

>>> 'terminals' problem from phillip -- Mon Mar  5 06:27:18 1990 <<<

Lauren, how did the 'kernel' installation go this weekend?
In trying to put a port on Otto's desk again this morning,
I still get nothing. Please apprise.
From phillip Mon Mar  5 07:55:02 1990
To: /micro/micro/labroot/cmnts/terminals-p lab_equip_probs

>From ljmassa Mon Mar  5 07:41:21 1990
Return-Path: <ljmassa>
Received: by argon.berkeley.edu. (4.1/SMI-4.0)
	id AA25533; Mon, 5 Mar 90 07:41:19 PST
Date: Mon, 5 Mar 90 07:41:19 PST
From: ljmassa (Lauren Massa)
Message-Id: <9003051541.AA25533@argon.berkeley.edu.>
To: phillip
Subject: Re:  terminals problem
Status: R

I didn't do it because Kirk decided that he had to do a prom change also
and he asked me to coordinate with Kevin so that we do the kernel swap at
the same time.  I'm waiting to be told when they are going to be ready to do it.
It won't happen today.

	Lauren



>>> 'terminals' problem from phillip -- Mon Mar  5 09:29:19 1990 <<<

P: Return key missing from keyboard in Y2.
S: Replaced keyboard.

(Marilyn, please report terminals problems in this file
 as opposed to 'misc'.)
From phillip Mon Mar  5 12:38:24 1990
To: roramos@janus
Subject: terminals to Excess & Salvage
Cc:  bob $pf/terminals-p


 Hello. This is to inform you that the following terminals
have been sent out permanently. Please adjust your records
accordingly.

1. UCB # 80058
2. UCB # 83112
3. no UCB # could be found but the serial # 2342V70566

Three CRT terminals in total were shipped out.
thank you,pg


From phillip Mon Mar  5 14:17:41 1990
To: roramos@janus.Berkeley.EDU
Subject: Re:  terminals to Excess & Salvage
Cc: bob $pf/terminals-p

 The #'s I gave you are the only #'s on them.
If you do not have the #'s on inventory, we will not
worry about it.
pg

From ljmassa Thu Mar  8 00:07:00 1990
Return-Path: <ljmassa>
Received: by argon.berkeley.edu. (4.1/SMI-4.0)
	id AA01064; Thu, 8 Mar 90 00:06:57 PST
Date: Thu, 8 Mar 90 00:06:57 PST
From: ljmassa (Lauren Massa)
Message-Id: <9003080806.AA01064@argon.berkeley.edu.>
To: bob, phillip, voros
Subject: new kernel
Status: RO


The new kernel for the ALM board had a device vector duplicated so I
had to reboot with the old kernel again.  I've mailed Kirk about it,
I'll swap in the new kernel as soon as it can be fixed.
        Lauren 
 


>>> 'terminals' problem from phillip -- Mon Mar 19 07:05:39 1990 <<<

The Z29 CRT in the microlab storage room 
is now on-line to host 'argon' .

>>> 'terminals' problem from phillip -- Mon Mar 19 07:50:53 1990 <<<

P: There are at least 5 'locked up' terminals in the lab.
   'treset' has no effect on them. This has been the case since
   Friday afternoon.(an1,y3,v1 for three).

A reboot of  the 'livingstone' host machine is in order.

>>> 'terminals' problem from ljmassa -- Mon Mar 19 10:21:06 1990 <<<

Subject: terminals problem



Phillip,
	I'm going to reboot livingstone.  Apparently the fix made a while
ago by Kevin to the domainname setting did not eliminate this problem.  I've
not been rebooting livingstone weekly because I wanted to look at it.  

I'd like to move a couple of the terminals to argon ports.  To get things 
working for now, I'll go ahead and reboot livingstone.
        Lauren 
 

>>> 'terminals' problem from phillip -- Mon Mar 19 11:20:13 1990 <<<

Records purposes only:  two new ports have been utilized;
1. ttyha - cable406-supermod4-channel1-   Otto's desk
2. ttyhb - data cable#1 - supermod2 - channel1 - rm.421 storeroom

Lauren , please post whatever records accordingly.
thank you, pg

>>> 'terminals' problem from rnorman -- Tue Mar 20 07:06:01 1990 <<<

Most of the terminals are down in the lab and are not reseting.

>>> 'terminals' problem from ljmassa -- Tue Mar 20 14:12:01 1990 <<<

Subject: terminals problem


Problem: This morning R. Norman reported that the terminals in the lab were
	not working.
Cause: Livingstone was completely locked up. Cause of lock-up unknown.

Solution: Livingstone had to be powered off and on, and then rebooted.

>>> 'terminals' problem from richard -- Wed Mar 21 09:48:38 1990 <<<

Once again, the terminal in GL-4 isn't working.  It will not
respond to a reset.

>>> 'terminals' problem from richard -- Wed Mar 21 09:50:09 1990 <<<

The backspace key and return key do not work on AN1 (the terminal
next to the CSEM).  Actually, the return key is intermittent.

>>> 'terminals' problem from bob -- Wed Mar 21 15:50:53 1990 <<<

terminals in the old lab (both) and the terminal in gl-2 and gl-4
do not work. In addition the backspace key and return key on the
an-1 terminal do not work.
The reset program failed to fix the 4 down terminals.

>>> 'terminals' problem from bob -- Thu Mar 22 07:48:38 1990 <<<

Currently the terminals in the old lab, gl-2,an-1,gl-4 and r-1
are non functional and won't reset.

>>> 'terminals' problem from ljmassa -- Thu Mar 22 14:51:40 1990 <<<

GL-2 was killed successfully but a new pluto would not come up.
AN-1, R-1, and GL-4, (tty's 08, 09, 10) could not be killed with treset.
When killed manually , new pluto's could not be restarted.

>>> 'terminals' problem from bob -- Fri Mar 23 08:07:56 1990 <<<

A closer investigation of terminal failures shows that attemnpts
to run " reservations" from a livingstone terminal locks it up
every time. A survey of the lab terminals this am shows them
all up. The terminal in y-2 and an-2 both were succesfully
reset after the lock-up problem was observed!

>>> 'terminals' problem from marilyn -- Tue Mar 27 09:53:05 1990 <<<

Problem: Backspace key at terminal [g}] tty05 doesn't function.

>>> 'terminals' problem from phillip -- Wed Mar 28 09:14:57 1990 <<<

Five Z29 keyboards were relinquished to the Eshop for repair today.
 When they return, the tty05 keyboard reported by Marilyn will be
changed out.

>>> 'terminals' problem from phillip -- Wed Mar 28 13:42:33 1990 <<<

P: The ALM board which was installed in argon today
   does not work. Kirk and Lauren have been notified.

>>> 'terminals' problem from phillip -- Mon Apr  2 07:03:56 1990 <<<

The CSSG spare ALM port board has been reinstalled in argon.
The new ports are again operational.

>>> 'terminals' problem from richard -- Fri Apr  6 13:57:55 1990 <<<

the terminal in GL-4 is down again!

It does not respond to the reset program.

>>> 'terminals' fix from richard -- Tue Apr 10 13:11:13 1990 <<<

The terminal in GL-4 is now working.  Who or what fixed it, I don't know.

>>> 'terminals' problem from bob -- Fri Apr 13 12:25:06 1990 <<<

Otto's terminal is down.
Bob

>>> 'terminals' problem from phillip -- Fri Apr 13 12:45:53 1990 <<<

P: As far as can be determined, ALL assigned
   ports on the new tty board are out of order.
   This is an ALM board, software or machine 
   problem.

>>> 'terminals' problem from rnorman -- Mon Apr 16 08:28:44 1990 <<<

Otto's terminal in the office is still down.  How many weeks has it
been now...

>>> 'terminals' problem from voros -- Mon Apr 16 11:13:56 1990 <<<

Date: Mon, 16 Apr 90 10:26:30 PDT
From: ljmassa (Lauren Massa)

The ALMII is still not operating correctly.  Marc and Kirk have been 
in contact with Sun and are doing everything possible to try and
get a functional board for Argon.  Apparently it works occasionally.

Kirk and Marc have been notified.  Sorry for the inconvenience but
this is Sun hardware and it's supposed to work!!
        Lauren 

>>> 'terminals' fix from phillip -- Wed Apr 18 07:10:35 1990 <<<

P: Tom's tycom port causing systemwide glitch.
S: Replaced pinched patch cord from patch bay
   in rm.406 to the AUX. port of Tom's terminal.
   Tycom is up and available for use.
(Tested o.k. by Jim Moon. Thank you for your help.)

>>> 'terminals' problem from rnorman -- Wed Apr 18 07:48:37 1990 <<<

The terminal in the parts room, 421, is jammed up and not working.

>>> 'terminals' fix from phillip -- Wed Apr 18 08:51:06 1990 <<<

The newest ALM (port) board in the argon machine is
being fixed by CSSG. Terminals affected are 1. Otto 
2. Storage room (421) 3.lamlink 2  4. Can't remember
the 4th port.

This fix is out of our hands and CSSG will apprise us
when their work is complete.

>>> 'terminals' fix from phillip -- Wed Apr 25 11:30:17 1990 <<<

As per Lauren's request: 
 1. Radon port#3 is now connected to the lam2 as  the lamlink channel.
 2. Radon port#4 is now connected (for a pluto) to the Z29 AUX port of
    the (troublesome) terminal in GL4 (Richard Hsu's terminal).
Neither of these ports is currently working and need a software boot
to start up. Pls. apprise when the #4 can begin use.

Also, the preliminary terminal wire inventory has been completed
by Paul Nelson. The data has been given to Scott Miles for input.
(The Radon info is on the update as well). Soon we will have an up
to date file of all tty wiring in the lab.

>>> 'terminals' problem from voros -- Mon Apr 30 11:16:59 1990 <<<

Davor reported that all lab terminals are down. Phil is investigating.
The override has been turned on.

>>> 'terminals' fix from ljmassa -- Mon Apr 30 13:42:28 1990 <<<

There was a problem in the yp service for the MicroSuns domain.
Solution:  Rebooting Argon and Livingstone solved the problem.
I'll try adjustments to how often the yp maps are updated to see if that
offers a permanent solution.

>>> 'terminals' problem from field -- Mon May 14 10:57:31 1990 <<<

terminal v2 in VLSI area is locked up.
