>>> 'sink1' problem from jules -- Tue Jan 10 13:49:48 1989 <<<

In cleaning the floats, I found that the bottom float does not move freely, and
will occasionally stick.

>>> 'sink1' problem from phillip -- Tue Jan 17 07:28:11 1989 <<<

Sink1 float assembly is o.k. for use. No sticking problem which
will cause malfunction is evident.

>>> 'sink1' problem from bob -- Wed Sep 13 13:46:48 1989 <<<

The full plenum lock out on sink1 is not working correctly and 
needs attention.

>>> 'sink1' problem from phillip -- Fri Sep 15 07:24:15 1989 <<<

P: FPL function not working.
S: Tested spool valves for d.i. and icw. All worked
   every time. No trouble found.

>>> 'sink1' problem from phillip -- Fri Sep 22 13:37:22 1989 <<<

P: FPL function not working.
S: Replaced plunger assembly of SV#2. The plenum lockout
   now works normally.

>>> 'sink1' problem from phillip -- Thu Oct  5 14:39:28 1989 <<<

DO NOT USE THIS SINK AT THIS TIME!!

Vacuum drain problem originating from this aqua-matic drain valve.
It will be replaced tomorrow a.m. 10/6/89.

>>> 'sink1' problem from phillip -- Fri Oct  6 08:35:49 1989 <<<

P: Aqua-matic main drain valve defected.
S: Replaced same. Sink1 is back on line.

>>> 'sink1' problem from phillip -- Thu Oct 12 14:45:30 1989 <<<

This sink is down and unusable.

>>> 'sink1' problem from phillip -- Fri Oct 13 11:45:42 1989 <<<

Sink1 is down because of a vacuum drain problem. It will
hopefully be restored by Monday afternoon.

>>> 'sink1' problem from phillip -- Mon Oct 16 11:49:02 1989 <<<

Sink1 is back on line and available for use.

>>> 'sink1' problem from raicu -- Fri Mar 30 11:52:25 1990 <<<

The hand-held d.i. water spray wasn't working

>>> 'sink1' problem from phillip -- Mon Apr  2 07:24:21 1990 <<<

P: D.I. deck gun  doesn't work.
S: Replaced defective kwik-disconnect valve
   on sink basin. The problem as reported by 
   Eugen is repaired. 
 
Sink1 is up and available for use.
