patch-2.2.10 linux/drivers/scsi/aic7xxx_proc.c
Next file: linux/drivers/scsi/aic7xxx_reg.h
Previous file: linux/drivers/scsi/aic7xxx.c
Back to the patch index
Back to the overall index
- Lines: 106
- Date:
Wed Jun 9 16:59:34 1999
- Orig file:
v2.2.9/linux/drivers/scsi/aic7xxx_proc.c
- Orig date:
Thu Jan 7 15:11:37 1999
diff -u --recursive --new-file v2.2.9/linux/drivers/scsi/aic7xxx_proc.c linux/drivers/scsi/aic7xxx_proc.c
@@ -160,21 +160,17 @@
size += sprintf(BLS, "%s", AIC7XXX_H_VERSION);
size += sprintf(BLS, "\n");
size += sprintf(BLS, "Compile Options:\n");
-#ifdef AIC7XXX_RESET_DELAY
- size += sprintf(BLS, " AIC7XXX_RESET_DELAY : %d\n", AIC7XXX_RESET_DELAY);
+#ifdef CONFIG_AIC7XXX_TCQ_ON_BY_DEFAULT
+ size += sprintf(BLS, " TCQ Enabled By Default : Enabled\n");
+#else
+ size += sprintf(BLS, " TCQ Enabled By Default : Disabled\n");
#endif
- size += sprintf(BLS, " AIC7XXX_TAGGED_QUEUEING: Adapter Support Enabled\n");
- size += sprintf(BLS, " Check below to see "
- "which\n"
- " devices use tagged "
- "queueing\n");
- size += sprintf(BLS, " AIC7XXX_PAGE_ENABLE : Enabled (This is no longer "
- "an option)\n");
#ifdef AIC7XXX_PROC_STATS
size += sprintf(BLS, " AIC7XXX_PROC_STATS : Enabled\n");
#else
size += sprintf(BLS, " AIC7XXX_PROC_STATS : Disabled\n");
#endif
+ size += sprintf(BLS, " AIC7XXX_RESET_DELAY : %d\n", AIC7XXX_RESET_DELAY);
size += sprintf(BLS, "\n");
size += sprintf(BLS, "Adapter Configuration:\n");
size += sprintf(BLS, " SCSI Adapter: %s\n",
@@ -194,8 +190,21 @@
}
if (p->features & AHC_WIDE)
wide = "Wide ";
- if (p->features & AHC_ULTRA2)
- ultra = "Ultra2-LVD/SE ";
+ if (p->features & AHC_ULTRA3)
+ {
+ switch(p->chip & AHC_CHIPID_MASK)
+ {
+ case AHC_AIC7892:
+ case AHC_AIC7899:
+ ultra = "Ultra-160/m LVD/SE ";
+ break;
+ default:
+ ultra = "Ultra-3 LVD/SE ";
+ break;
+ }
+ }
+ else if (p->features & AHC_ULTRA2)
+ ultra = "Ultra-2 LVD/SE ";
else if (p->features & AHC_ULTRA)
ultra = "Ultra ";
size += sprintf(BLS, " %s%sController%s\n",
@@ -250,11 +259,7 @@
}
size += sprintf(BLS, " Tag Queue Enable Flags: 0x%04x\n", p->tagenable);
size += sprintf(BLS, "Ordered Queue Tag Flags: 0x%04x\n", p->orderedtag);
-#ifdef AIC7XXX_CMDS_PER_LUN
- size += sprintf(BLS, "Default Tag Queue Depth: %d\n", AIC7XXX_CMDS_PER_LUN);
-#else
- size += sprintf(BLS, "Default Tag Queue Depth: %d\n", 8);
-#endif
+ size += sprintf(BLS, "Default Tag Queue Depth: %d\n", AIC7XXX_CMDS_PER_DEVICE);
size += sprintf(BLS, " Tagged Queue By Device array for aic7xxx host "
"instance %d:\n", p->instance);
size += sprintf(BLS, " {");
@@ -295,11 +300,12 @@
if (p->transinfo[target].cur_offset != 0)
{
struct aic7xxx_syncrate *sync_rate;
+ unsigned char options = p->transinfo[target].cur_options;
int period = p->transinfo[target].cur_period;
int rate = (p->transinfo[target].cur_width ==
MSG_EXT_WDTR_BUS_16_BIT) ? 1 : 0;
- sync_rate = aic7xxx_find_syncrate(p, &period, AHC_SYNCRATE_ULTRA2);
+ sync_rate = aic7xxx_find_syncrate(p, &period, 0, &options);
if (sync_rate != NULL)
{
size += sprintf(BLS, "%s MByte/sec, offset %d\n",
@@ -313,18 +319,21 @@
}
}
size += sprintf(BLS, " Transinfo settings: ");
- size += sprintf(BLS, "current(%d/%d/%d), ",
+ size += sprintf(BLS, "current(%d/%d/%d/%d), ",
p->transinfo[target].cur_period,
p->transinfo[target].cur_offset,
- p->transinfo[target].cur_width);
- size += sprintf(BLS, "goal(%d/%d/%d), ",
+ p->transinfo[target].cur_width,
+ p->transinfo[target].cur_options);
+ size += sprintf(BLS, "goal(%d/%d/%d/%d), ",
p->transinfo[target].goal_period,
p->transinfo[target].goal_offset,
- p->transinfo[target].goal_width);
- size += sprintf(BLS, "user(%d/%d/%d)\n",
+ p->transinfo[target].goal_width,
+ p->transinfo[target].goal_options);
+ size += sprintf(BLS, "user(%d/%d/%d/%d)\n",
p->transinfo[target].user_period,
p->transinfo[target].user_offset,
- p->transinfo[target].user_width);
+ p->transinfo[target].user_width,
+ p->transinfo[target].user_options);
#ifdef AIC7XXX_PROC_STATS
size += sprintf(BLS, " Total transfers %ld (%ld reads and %ld writes)\n",
sp->r_total + sp->w_total, sp->r_total, sp->w_total);
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)