patch-2.4.0-test9 linux/drivers/scsi/Config.in

• Lines: 69
• Date: Tue Sep 19 08:01:34 2000
• Orig file: v2.4.0-test8/linux/drivers/scsi/Config.in
• Orig date: Mon Mar 27 09:45:33 2000

diff -u --recursive --new-file v2.4.0-test8/linux/drivers/scsi/Config.in linux/drivers/scsi/Config.in
@@ -55,9 +55,6 @@
    bool '  Collect statistics to report in /proc' CONFIG_AIC7XXX_PROC_STATS
    int  '  Delay in seconds after SCSI bus reset' CONFIG_AIC7XXX_RESET_DELAY 5
 fi
-if [ "$CONFIG_X86" = "y" ]; then
-   dep_tristate 'IBM ServeRAID support' CONFIG_SCSI_IPS $CONFIG_SCSI
-fi
 dep_tristate 'AdvanSys SCSI support' CONFIG_SCSI_ADVANSYS $CONFIG_SCSI
 dep_tristate 'Always IN2000 SCSI support' CONFIG_SCSI_IN2000 $CONFIG_SCSI
 dep_tristate 'AM53/79C974 PCI SCSI support' CONFIG_SCSI_AM53C974 $CONFIG_SCSI
@@ -67,6 +64,9 @@
 if [ "$CONFIG_SCSI_BUSLOGIC" != "n" ]; then
    bool '  Omit FlashPoint support' CONFIG_SCSI_OMIT_FLASHPOINT
 fi
+if [ "$CONFIG_PCI" = "y" ]; then
+   dep_tristate 'Compaq Fibre Channel 64-bit/66Mhz HBA support' CONFIG_SCSI_CPQFCTS $CONFIG_SCSI
+fi
 dep_tristate 'DMX3191D SCSI support' CONFIG_SCSI_DMX3191D $CONFIG_SCSI $CONFIG_PCI
 dep_tristate 'DTC3180/3280 SCSI support' CONFIG_SCSI_DTC3280 $CONFIG_SCSI
 dep_tristate 'EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support' CONFIG_SCSI_EATA $CONFIG_SCSI
@@ -89,6 +89,16 @@
 		"Port CONFIG_SCSI_G_NCR5380_PORT \
 		 Memory CONFIG_SCSI_G_NCR5380_MEM" Port
 fi
+if [ "$CONFIG_MCA" = "y" ]; then
+   dep_tristate 'IBMMCA SCSI support' CONFIG_SCSI_IBMMCA $CONFIG_SCSI
+   if [ "$CONFIG_SCSI_IBMMCA" != "n" ]; then
+      bool '  Standard SCSI-order' CONFIG_IBMMCA_SCSI_ORDER_STANDARD
+      bool '  Reset SCSI-devices at boottime' CONFIG_IBMMCA_SCSI_DEV_RESET
+   fi
+fi
+if [ "$CONFIG_X86" = "y" ]; then
+   dep_tristate 'IBM ServeRAID support' CONFIG_SCSI_IPS $CONFIG_SCSI
+fi
 dep_tristate 'Initio 9100U(W) support' CONFIG_SCSI_INITIO $CONFIG_SCSI $CONFIG_PCI
 dep_tristate 'Initio INI-A100U2W support' CONFIG_SCSI_INIA100 $CONFIG_SCSI $CONFIG_PCI
 if [ "$CONFIG_PARPORT" != "n" ]; then
@@ -100,8 +110,6 @@
    fi
 fi
 dep_tristate 'NCR53c406a SCSI support' CONFIG_SCSI_NCR53C406A $CONFIG_SCSI
-dep_tristate 'symbios 53c416 SCSI support' CONFIG_SCSI_SYM53C416 $CONFIG_SCSI
-dep_tristate 'Simple 53c710 SCSI support (Compaq, NCR machines)' CONFIG_SCSI_SIM710 $CONFIG_SCSI
 dep_tristate 'NCR53c7,8xx SCSI support'  CONFIG_SCSI_NCR53C7xx $CONFIG_SCSI $CONFIG_PCI
 if [ "$CONFIG_SCSI_NCR53C7xx" != "n" ]; then
    bool '  always negotiate synchronous transfers' CONFIG_SCSI_NCR53C7xx_sync
@@ -129,13 +137,6 @@
    fi
 fi
 if [ "$CONFIG_MCA" = "y" ]; then
-   dep_tristate 'IBMMCA SCSI support' CONFIG_SCSI_IBMMCA $CONFIG_SCSI
-   if [ "$CONFIG_SCSI_IBMMCA" != "n" ]; then
-      bool '  Standard SCSI-order' CONFIG_IBMMCA_SCSI_ORDER_STANDARD
-      bool '  Reset SCSI-devices at boottime' CONFIG_IBMMCA_SCSI_DEV_RESET
-   fi
-fi
-if [ "$CONFIG_MCA" = "y" ]; then
    dep_tristate 'NCR MCA 53C9x SCSI support' CONFIG_SCSI_MCA_53C9X $CONFIG_SCSI
 fi
 dep_tristate 'PAS16 SCSI support' CONFIG_SCSI_PAS16 $CONFIG_SCSI
@@ -151,6 +152,8 @@
 if [ "$CONFIG_X86" = "y" ]; then
    dep_tristate 'Seagate ST-02 and Future Domain TMC-8xx SCSI support' CONFIG_SCSI_SEAGATE $CONFIG_SCSI
 fi
+dep_tristate 'Simple 53c710 SCSI support (Compaq, NCR machines)' CONFIG_SCSI_SIM710 $CONFIG_SCSI
+dep_tristate 'Symbios 53c416 SCSI support' CONFIG_SCSI_SYM53C416 $CONFIG_SCSI
 if [ "$CONFIG_PCI" = "y" ]; then
    dep_tristate 'Tekram DC390(T) and Am53/79C974 SCSI support' CONFIG_SCSI_DC390T $CONFIG_SCSI
    if [ "$CONFIG_SCSI_DC390T" != "n" ]; then