patch-2.4.0-test9 linux/drivers/char/Makefile

• Lines: 61
• Date: Sun Oct 1 19:45:29 2000
• Orig file: v2.4.0-test8/linux/drivers/char/Makefile
• Orig date: Tue Aug 22 11:41:14 2000

diff -u --recursive --new-file v2.4.0-test8/linux/drivers/char/Makefile linux/drivers/char/Makefile
@@ -101,6 +101,8 @@
 obj-$(CONFIG_VT) += vt.o vc_screen.o consolemap.o consolemap_deftbl.o $(CONSOLE) selection.o
 obj-$(CONFIG_SERIAL) += $(SERIAL)
 obj-$(CONFIG_SERIAL_21285) += serial_21285.o
+obj-$(CONFIG_SERIAL_SA1100) += serial_sa1100.o
+obj-$(CONFIG_SERIAL_AMBA) += serial_amba.o
 
 ifndef CONFIG_SUN_KEYBOARD
   obj-$(CONFIG_VT) += keyboard.o $(KEYMAP) $(KEYBD)
@@ -158,26 +160,16 @@
 obj-$(CONFIG_APPLICOM) += applicom.o
 obj-$(CONFIG_MS_BUSMOUSE) += msbusmouse.o
 obj-$(CONFIG_82C710_MOUSE) += qpmouse.o
-obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
-obj-$(CONFIG_PCWATCHDOG) += pcwd.o
-obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
-obj-$(CONFIG_MIXCOMWD) += mixcomwd.o
-obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
 obj-$(CONFIG_AMIGAMOUSE) += amigamouse.o
 obj-$(CONFIG_ATARIMOUSE) += atarimouse.o
 obj-$(CONFIG_ADBMOUSE) += adbmouse.o
 obj-$(CONFIG_PC110_PAD) += pc110pad.o
-obj-$(CONFIG_WDT) += wdt.o
-obj-$(CONFIG_WDTPCI) += wdt_pci.o
 obj-$(CONFIG_RTC) += rtc.o
 obj-$(CONFIG_EFI_RTC) += efirtc.o
 ifeq ($(CONFIG_PPC),)
   obj-$(CONFIG_NVRAM) += nvram.o
 endif
-
-obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
-obj-$(CONFIG_977_WATCHDOG) += wdt977.o
-obj-$(CONFIG_I810_TCO) += i810-tco.o
+obj-$(CONFIG_TOSHIBA) += toshiba.o
 obj-$(CONFIG_DS1620) += ds1620.o
 obj-$(CONFIG_INTEL_RNG) += i810_rng.o
 
@@ -227,6 +219,23 @@
     MOD_SUB_DIRS += agp
   endif
 endif
+
+# Only one watchdog can succeed. We probe the hardware watchdog
+# drivers first, then the softdog driver.  This means if your hardware
+# watchdog dies or is 'borrowed' for some reason the software watchdog
+# still gives you some cover.
+
+obj-$(CONFIG_PCWATCHDOG) += pcwd.o
+obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
+obj-$(CONFIG_MIXCOMWD) += mixcomwd.o
+obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
+obj-$(CONFIG_WDT) += wdt.o
+obj-$(CONFIG_WDTPCI) += wdt_pci.o
+obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
+obj-$(CONFIG_977_WATCHDOG) += wdt977.o
+obj-$(CONFIG_I810_TCO) += i810-tco.o
+obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
+
 
 # Extract lists of the multi-part drivers.
 # The 'int-*' lists are the intermediate files used to build the multi's.