patch-2.4.0-test9 linux/arch/arm/def-configs/brutus

Next file: linux/arch/arm/def-configs/cerf
Previous file: linux/arch/arm/def-configs/assabet
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.4.0-test8/linux/arch/arm/def-configs/brutus linux/arch/arm/def-configs/brutus
@@ -2,45 +2,51 @@
 # Automatically generated make config: don't edit
 #
 CONFIG_ARM=y
+# CONFIG_SBUS is not set
 CONFIG_UID16=y
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
+# CONFIG_OBSOLETE is not set
 
 #
-# System and processor type
+# System Type
 #
 # CONFIG_ARCH_ARC is not set
 # CONFIG_ARCH_A5K is not set
-# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
-# CONFIG_FOOTBRIDGE is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
+
+#
+# SA11x0 Implementations
+#
 # CONFIG_SA1100_ASSABET is not set
 CONFIG_SA1100_BRUTUS=y
-# CONFIG_SA1100_EMPEG is not set
-# CONFIG_SA1100_ITSY is not set
 # CONFIG_SA1100_BITSY is not set
 # CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
 # CONFIG_SA1100_THINCLIENT is not set
 # CONFIG_SA1100_GRAPHICSCLIENT is not set
 # CONFIG_SA1100_VICTOR is not set
-# CONFIG_SA1100_TIFON is not set
-CONFIG_DISCONTIGMEM=y
-# CONFIG_ARCH_ACORN is not set
+CONFIG_ANGELBOOT=y
+# CONFIG_SA1100_FREQUENCY_SCALE is not set
+# CONFIG_SA1100_VOLTAGE_SCALE is not set
 CONFIG_CPU_32=y
 # CONFIG_CPU_26 is not set
 CONFIG_CPU_32v4=y
 CONFIG_CPU_SA1100=y
+# CONFIG_ARCH_ACORN is not set
+# CONFIG_FOOTBRIDGE is not set
+# CONFIG_FOOTBRIDGE_HOST is not set
+# CONFIG_FOOTBRIDGE_ADDIN is not set
+CONFIG_DISCONTIGMEM=y
 # CONFIG_PCI is not set
 # CONFIG_ISA is not set
 # CONFIG_ISA_DMA is not set
-# CONFIG_SBUS is not set
-# CONFIG_PCMCIA is not set
-# CONFIG_ALIGNMENT_TRAP is not set
 
 #
 # Loadable module support
@@ -52,34 +58,35 @@
 #
 # General setup
 #
+# CONFIG_HOTPLUG is not set
+# CONFIG_PCMCIA is not set
 # CONFIG_NET is not set
 CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
 CONFIG_NWFPE=y
 CONFIG_KCORE_ELF=y
 # CONFIG_KCORE_AOUT is not set
 CONFIG_BINFMT_AOUT=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_PM is not set
 # CONFIG_ARTHUR is not set
+CONFIG_CMDLINE="keepinitrd"
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+CONFIG_LEDS_CPU=y
+# CONFIG_ALIGNMENT_TRAP is not set
 
 #
 # Parallel port support
 #
 # CONFIG_PARPORT is not set
-CONFIG_CMDLINE=""
-CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-CONFIG_LEDS_CPU=y
 
 #
-# I2O device support
+# Memory Technology Devices (MTD)
 #
-# CONFIG_I2O is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I2O_PROC is not set
+# CONFIG_MTD is not set
 
 #
 # Plug and Play configuration
@@ -100,18 +107,48 @@
 # CONFIG_BLK_DEV_LVM is not set
 # CONFIG_BLK_DEV_MD is not set
 # CONFIG_MD_LINEAR is not set
-# CONFIG_MD_STRIPED is not set
+# CONFIG_MD_RAID0 is not set
+# CONFIG_MD_RAID1 is not set
+# CONFIG_MD_RAID5 is not set
 CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_BLK_DEV_FLASH is not set
 
 #
+# ATA/IDE/MFM/RLL support
+#
+# CONFIG_IDE is not set
+# CONFIG_BLK_DEV_IDE_MODES is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI support
+#
+# CONFIG_SCSI is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+# CONFIG_I2O_BLOCK is not set
+# CONFIG_I2O_SCSI is not set
+# CONFIG_I2O_PROC is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
 # CONFIG_VT_CONSOLE is not set
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
+# CONFIG_TOUCHSCREEN_SA1100 is not set
+# CONFIG_TOUCHSCREEN_BITSY is not set
 # CONFIG_SERIAL is not set
 # CONFIG_SERIAL_EXTENDED is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
@@ -139,6 +176,7 @@
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_INTEL_RNG is not set
 # CONFIG_NVRAM is not set
 # CONFIG_RTC is not set
 
@@ -159,43 +197,6 @@
 # CONFIG_AGP is not set
 
 #
-# Console drivers
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FB=y
-
-#
-# Frame-buffer support
-#
-CONFIG_FB=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FB_SA1100=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FBCON_ADVANCED is not set
-CONFIG_FBCON_CFB2=y
-CONFIG_FBCON_CFB4=y
-CONFIG_FBCON_CFB8=y
-CONFIG_FBCON_FONTWIDTH8_ONLY=y
-CONFIG_FBCON_FONTS=y
-CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-# CONFIG_BLK_DEV_IDE_MODES is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
 # File systems
 #
 # CONFIG_QUOTA is not set
@@ -211,6 +212,7 @@
 # CONFIG_UMSDOS_FS is not set
 # CONFIG_VFAT_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_RAMFS is not set
 # CONFIG_ISO9660_FS is not set
@@ -242,6 +244,37 @@
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
+
+#
+# Console drivers
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FB=y
+
+#
+# Frame-buffer support
+#
+CONFIG_FB=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FB_SA1100=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FBCON_ADVANCED is not set
+CONFIG_FBCON_CFB2=y
+CONFIG_FBCON_CFB4=y
+CONFIG_FBCON_CFB8=y
+CONFIG_FBCON_CFB16=y
+CONFIG_FBCON_FONTWIDTH8_ONLY=y
+CONFIG_FBCON_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
 
 #
 # USB support

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)