patch-2.4.0-test7 linux/drivers/net/wan/Config.in

• Lines: 167
• Date: Fri Aug 11 17:14:23 2000
• Orig file: v2.4.0-test6/linux/drivers/net/wan/Config.in
• Orig date: Fri Jul 14 12:12:11 2000

diff -u --recursive --new-file v2.4.0-test6/linux/drivers/net/wan/Config.in linux/drivers/net/wan/Config.in
@@ -7,86 +7,87 @@
 
 bool 'Wan interfaces support' CONFIG_WAN
 if [ "$CONFIG_WAN" = "y" ]; then
+# There is no way to detect a comtrol sv11 - force it modular for now.
 
-	# There is no way to detect a comtrol sv11 - force it modular for now.
-	
-	dep_tristate 'Comtrol Hostess SV-11 support' CONFIG_HOSTESS_SV11 m
-
-	# The COSA/SRP driver has not been tested as non-modular yet.
-
-	dep_tristate 'COSA/SRP sync serial boards support' CONFIG_COSA m
-
-	#
-	# COMX drivers
-	#
-
-	tristate 'MultiGate (COMX) synchronous serial boards support' CONFIG_COMX
-
-        #
-        # Lan Media's board. Currently 1000, 1200, 5200, 5245
-        #
-        tristate 'LanMedia Corp. SSI/V.35, T1/E1, HSSI, T3 boards' CONFIG_LANMEDIA
- 
-	if [ "$CONFIG_COMX" != "n" ]; then
-		dep_tristate '  Support for COMX/CMX/HiCOMX boards' CONFIG_COMX_HW_COMX $CONFIG_COMX
-		dep_tristate '  Support for LoCOMX board' CONFIG_COMX_HW_LOCOMX $CONFIG_COMX
-		dep_tristate '  Support for MixCOM board' CONFIG_COMX_HW_MIXCOM $CONFIG_COMX
-		dep_tristate '  Support for HDLC and syncPPP protocols on MultiGate boards' CONFIG_COMX_PROTO_PPP $CONFIG_COMX
-		if [ "$CONFIG_LAPB" = "y" ]; then
-			dep_tristate '  Support for LAPB protocol on MultiGate boards' CONFIG_COMX_PROTO_LAPB $CONFIG_COMX
-		fi
-		if [ "$CONFIG_LAPB" = "m" ]; then
-			dep_tristate '  Support for LAPB protocol on MultiGate boards' CONFIG_COMX_PROTO_LAPB $CONFIG_LAPB
-		fi
-		dep_tristate '  Support for Frame Relay on MultiGate boards' CONFIG_COMX_PROTO_FR $CONFIG_COMX
-	fi
-
-	# There is no way to detect a Sealevel board. Force it modular
-
-	dep_tristate 'Sealevel Systems 4021 support' CONFIG_SEALEVEL_4021 m
-
-	dep_tristate 'SyncLink HDLC/SYNCPPP support' CONFIG_SYNCLINK_SYNCPPP m
-
-	tristate 'Frame relay DLCI support' CONFIG_DLCI
-	if [ "$CONFIG_DLCI" != "n" ]; then
-	   int 'Max open DLCI' CONFIG_DLCI_COUNT 24
-	   int 'Max DLCI per device' CONFIG_DLCI_MAX 8
-	   dep_tristate '  SDLA (Sangoma S502/S508) support' CONFIG_SDLA $CONFIG_DLCI
-	fi
-
-	# Wan router core.
-
-	if [ "$CONFIG_WAN_ROUTER" != "n" ]; then
-	   bool 'WAN router drivers' CONFIG_WAN_ROUTER_DRIVERS
-	   if [ "$CONFIG_WAN_ROUTER_DRIVERS" = "y" ]; then
-	      dep_tristate '  Sangoma WANPIPE(tm) multiprotocol cards' CONFIG_VENDOR_SANGOMA $CONFIG_WAN_ROUTER_DRIVERS
-	      if [ "$CONFIG_VENDOR_SANGOMA" != "n" ]; then
-		 int '    Maximum number of cards' CONFIG_WANPIPE_CARDS 1
-		 bool '    WANPIPE Cisco HDLC support' CONFIG_WANPIPE_CHDLC
-		 if [ "$CONFIG_OBSOLETE" = "y" ]; then
-		    bool '    WANPIPE Frame Relay support' CONFIG_WANPIPE_FR
-		    bool '    WANPIPE X.25 support' CONFIG_WANPIPE_X25
-		 fi
-		 bool '    WANPIPE PPP support' CONFIG_WANPIPE_PPP
-	      fi
-	      if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-		 dep_tristate '  Cyclom 2X(tm) cards (EXPERIMENTAL)' CONFIG_CYCLADES_SYNC $CONFIG_WAN_ROUTER_DRIVERS
-		 if [ "$CONFIG_CYCLADES_SYNC" != "n" ]; then
-		    bool '    Cyclom 2X X.25 support' CONFIG_CYCLOMX_X25
-		 fi
-	      fi
-	   fi
-	fi
-
-	# X.25 network drivers
-
-	dep_tristate 'LAPB over Ethernet driver' CONFIG_LAPBETHER $CONFIG_LAPB $CONFIG_X25
-	dep_tristate 'X.25 async driver' CONFIG_X25_ASY $CONFIG_LAPB $CONFIG_X25
-
-	if [ "$CONFIG_X86" = "y" ]; then
-	   tristate 'SBNI12-xx support' CONFIG_SBNI
-	fi
+   dep_tristate '  Comtrol Hostess SV-11 support' CONFIG_HOSTESS_SV11 m
+
+# The COSA/SRP driver has not been tested as non-modular yet.
+
+   dep_tristate '  COSA/SRP sync serial boards support' CONFIG_COSA m
+
+#
+# COMX drivers
+#
+
+   tristate '  MultiGate (COMX) synchronous serial boards support' CONFIG_COMX
+   if [ "$CONFIG_COMX" != "n" ]; then
+      dep_tristate '    Support for COMX/CMX/HiCOMX boards' CONFIG_COMX_HW_COMX $CONFIG_COMX
+      dep_tristate '    Support for LoCOMX board' CONFIG_COMX_HW_LOCOMX $CONFIG_COMX
+      dep_tristate '    Support for MixCOM board' CONFIG_COMX_HW_MIXCOM $CONFIG_COMX
+      dep_tristate '    Support for HDLC and syncPPP protocols on MultiGate boards' CONFIG_COMX_PROTO_PPP $CONFIG_COMX
+      if [ "$CONFIG_LAPB" = "y" ]; then
+	 dep_tristate '    Support for LAPB protocol on MultiGate boards' CONFIG_COMX_PROTO_LAPB $CONFIG_COMX
+      fi
+      if [ "$CONFIG_LAPB" = "m" ]; then
+	 dep_tristate '    Support for LAPB protocol on MultiGate boards' CONFIG_COMX_PROTO_LAPB $CONFIG_LAPB
+      fi
+      dep_tristate '    Support for Frame Relay on MultiGate boards' CONFIG_COMX_PROTO_FR $CONFIG_COMX
+   fi
+
+#
+# Lan Media's board. Currently 1000, 1200, 5200, 5245
+#
+
+   tristate '  LanMedia Corp. SSI/V.35, T1/E1, HSSI, T3 boards' CONFIG_LANMEDIA
+
+# There is no way to detect a Sealevel board. Force it modular
+
+   dep_tristate '  Sealevel Systems 4021 support' CONFIG_SEALEVEL_4021 m
+
+   dep_tristate '  SyncLink HDLC/SYNCPPP support' CONFIG_SYNCLINK_SYNCPPP m
+
+   tristate '  Frame relay DLCI support' CONFIG_DLCI
+   if [ "$CONFIG_DLCI" != "n" ]; then
+      int '    Max open DLCI' CONFIG_DLCI_COUNT 24
+      int '    Max DLCI per device' CONFIG_DLCI_MAX 8
+      dep_tristate '    SDLA (Sangoma S502/S508) support' CONFIG_SDLA $CONFIG_DLCI
+   fi
+
+# Wan router core.
+
+   if [ "$CONFIG_WAN_ROUTER" != "n" ]; then
+      bool '  WAN router drivers' CONFIG_WAN_ROUTER_DRIVERS
+      if [ "$CONFIG_WAN_ROUTER_DRIVERS" = "y" ]; then
+	 dep_tristate '    Sangoma WANPIPE(tm) multiprotocol cards' CONFIG_VENDOR_SANGOMA $CONFIG_WAN_ROUTER_DRIVERS
+	 if [ "$CONFIG_VENDOR_SANGOMA" != "n" ]; then
+	    int '      Maximum number of cards' CONFIG_WANPIPE_CARDS 1
+	    bool '      WANPIPE Cisco HDLC support' CONFIG_WANPIPE_CHDLC
+	    if [ "$CONFIG_OBSOLETE" = "y" ]; then
+	       bool '      WANPIPE Frame Relay support (OBSOLETE)' CONFIG_WANPIPE_FR
+	       bool '      WANPIPE X.25 support (OBSOLETE)' CONFIG_WANPIPE_X25
+	    fi
+	    bool '      WANPIPE PPP support' CONFIG_WANPIPE_PPP
+	 fi
+	 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+	    dep_tristate '    Cyclom 2X(tm) cards (EXPERIMENTAL)' CONFIG_CYCLADES_SYNC $CONFIG_WAN_ROUTER_DRIVERS
+	    if [ "$CONFIG_CYCLADES_SYNC" != "n" ]; then
+	       bool '      Cyclom 2X X.25 support' CONFIG_CYCLOMX_X25
+	    fi
+	 fi
+      fi
+   fi
+
+
+# X.25 network drivers
+
+   if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+      dep_tristate '  LAPB over Ethernet driver (EXPERIMENTAL)' CONFIG_LAPBETHER $CONFIG_LAPB $CONFIG_X25
+      dep_tristate '  X.25 async driver (EXPERIMENTAL)' CONFIG_X25_ASY $CONFIG_LAPB $CONFIG_X25
+   fi
+
+   if [ "$CONFIG_X86" = "y" ]; then
+      tristate '  SBNI12-xx support' CONFIG_SBNI
+   fi
 fi
 
 endmenu
-