patch-2.4.0-test6 linux/drivers/isdn/hisax/callc.c
Next file: linux/drivers/isdn/hisax/cert.c
Previous file: linux/drivers/isdn/hisax/bkm_ax.h
Back to the patch index
Back to the overall index
- Lines: 210
- Date:
Tue Aug 8 09:31:00 2000
- Orig file:
v2.4.0-test5/linux/drivers/isdn/hisax/callc.c
- Orig date:
Mon Mar 27 08:08:25 2000
diff -u --recursive --new-file v2.4.0-test5/linux/drivers/isdn/hisax/callc.c linux/drivers/isdn/hisax/callc.c
@@ -1,5 +1,5 @@
-/* $Id: callc.c,v 2.41 2000/03/17 07:07:42 kai Exp $
-
+/* $Id: callc.c,v 2.47 2000/06/26 08:59:12 keil Exp $
+ *
* Author Karsten Keil (keil@isdn4linux.de)
* based on the teles driver from Jan den Ouden
*
@@ -10,156 +10,6 @@
* Thanks to Jan den Ouden
* Fritz Elfert
*
- * $Log: callc.c,v $
- * Revision 2.41 2000/03/17 07:07:42 kai
- * fixed oops when dialing out without l3 protocol selected
- *
- * Revision 2.40 1999/12/19 12:59:56 keil
- * fix leased line handling
- * and cosmetics
- *
- * Revision 2.39 1999/10/14 20:25:28 keil
- * add a statistic for error monitoring
- *
- * Revision 2.38 1999/10/11 22:16:27 keil
- * Suspend/Resume is possible without explicit ID too
- *
- * Revision 2.37 1999/09/20 19:49:47 keil
- * Fix wrong init of PStack
- *
- * Revision 2.36 1999/09/20 12:13:13 keil
- * Fix hang if no protocol was selected
- *
- * Revision 2.35 1999/09/04 06:20:05 keil
- * Changes from kernel set_current_state()
- *
- * Revision 2.34 1999/08/25 20:02:34 werner
- * Changed return values for stat_icall(w) from 3->4 and 4->5 because of conflicts
- * with existing software definitions. (PtP incomplete called party number)
- *
- * Revision 2.33 1999/08/25 17:00:09 keil
- * Make ISAR V32bis modem running
- * Make LL->HL interface open for additional commands
- *
- * Revision 2.32 1999/08/22 20:27:01 calle
- * backported changes from kernel 2.3.14:
- * - several #include "config.h" gone, others come.
- * - "struct device" changed to "struct net_device" in 2.3.14, added a
- * define in isdn_compat.h for older kernel versions.
- *
- * Revision 2.31 1999/08/05 20:43:10 keil
- * ISAR analog modem support
- *
- * Revision 2.30 1999/07/25 16:24:04 keil
- * Fixed TEI now working again
- *
- * Revision 2.29 1999/07/13 21:05:41 werner
- * Modified set_channel_limit to use new callback ISDN_STAT_DISCH.
- *
- * Revision 2.28 1999/07/09 08:30:02 keil
- * cosmetics
- *
- * Revision 2.27 1999/07/05 23:51:38 werner
- * Allow limiting of available HiSax B-chans per card. Controlled by hisaxctrl
- * hisaxctrl id 10 <nr. of chans 0-2>
- *
- * Revision 2.26 1999/07/01 08:11:21 keil
- * Common HiSax version for 2.0, 2.1, 2.2 and 2.3 kernel
- *
- * Revision 2.25 1999/01/02 11:17:20 keil
- * Changes for 2.2
- *
- * Revision 2.24 1998/11/15 23:54:24 keil
- * changes from 2.0
- *
- * Revision 2.23 1998/09/30 22:21:57 keil
- * cosmetics
- *
- * Revision 2.22 1998/08/20 13:50:29 keil
- * More support for hybrid modem (not working yet)
- *
- * Revision 2.21 1998/08/13 23:36:15 keil
- * HiSax 3.1 - don't work stable with current LinkLevel
- *
- * Revision 2.20 1998/06/26 15:13:05 fritz
- * Added handling of STAT_ICALL with incomplete CPN.
- * Added AT&L for ttyI emulator.
- * Added more locking stuff in tty_write.
- *
- * Revision 2.19 1998/05/25 14:08:06 keil
- * HiSax 3.0
- * fixed X.75 and leased line to work again
- * Point2Point and fixed TEI are runtime options now:
- * hisaxctrl <id> 7 1 set PTP
- * hisaxctrl <id> 8 <TEIVALUE *2 >
- * set fixed TEI to TEIVALUE (0-63)
- *
- * Revision 2.18 1998/05/25 12:57:40 keil
- * HiSax golden code from certification, Don't use !!!
- * No leased lines, no X75, but many changes.
- *
- * Revision 2.17 1998/04/15 16:46:06 keil
- * RESUME support
- *
- * Revision 2.16 1998/04/10 10:35:17 paul
- * fixed (silly?) warnings from egcs on Alpha.
- *
- * Revision 2.15 1998/03/19 13:18:37 keil
- * Start of a CAPI like interface for supplementary Service
- * first service: SUSPEND
- *
- * Revision 2.14 1998/03/07 22:56:54 tsbogend
- * made HiSax working on Linux/Alpha
- *
- * Revision 2.13 1998/02/12 23:07:16 keil
- * change for 2.1.86 (removing FREE_READ/FREE_WRITE from [dev]_kfree_skb()
- *
- * Revision 2.12 1998/02/09 10:55:54 keil
- * New leased line mode
- *
- * Revision 2.11 1998/02/02 13:35:19 keil
- * config B-channel delay
- *
- * Revision 2.10 1997/11/06 17:09:15 keil
- * New 2.1 init code
- *
- * Revision 2.9 1997/10/29 19:01:58 keil
- * new LL interface
- *
- * Revision 2.8 1997/10/10 20:56:44 fritz
- * New HL interface.
- *
- * Revision 2.7 1997/10/01 09:21:28 fritz
- * Removed old compatibility stuff for 2.0.X kernels.
- * From now on, this code is for 2.1.X ONLY!
- * Old stuff is still in the separate branch.
- *
- * Revision 2.6 1997/09/11 17:26:58 keil
- * Open B-channel if here are incomming packets
- *
- * Revision 2.5 1997/08/07 17:46:05 keil
- * Fix Incomming Call without broadcast
- *
- * Revision 2.4 1997/08/03 14:37:58 keil
- * Activate Layer2 in PtP mode
- *
- * Revision 2.3 1997/07/31 19:23:40 keil
- * LAYER2_WATCHING for PtP
- *
- * Revision 2.2 1997/07/31 11:48:18 keil
- * experimental REJECT after ALERTING
- *
- * Revision 2.1 1997/07/30 17:12:59 keil
- * more changes for 'One TEI per card'
- *
- * Revision 2.0 1997/07/27 21:12:21 keil
- * CRef based L3; new channel handling; many other stuff
- *
- * Revision 1.31 1997/06/26 11:09:23 keil
- * New managment and minor changes
- *
- * old logs removed /KKe
- *
*/
#define __NO_VERSION__
@@ -170,7 +20,7 @@
#define MOD_USE_COUNT ( GET_USE_COUNT (&__this_module))
#endif /* MODULE */
-const char *lli_revision = "$Revision: 2.41 $";
+const char *lli_revision = "$Revision: 2.47 $";
extern struct IsdnCard cards[];
extern int nrcards;
@@ -516,7 +366,7 @@
* No need to return "unknown" for calls without OAD,
* cause that's handled in linklevel now (replaced by '0')
*/
- ic.parm.setup = chanp->proc->para.setup;
+ memcpy (&ic.parm.setup, &chanp->proc->para.setup, sizeof(ic.parm.setup));
ret = chanp->cs->iif.statcallb(&ic);
if (chanp->debug & 1)
link_debug(chanp, 1, "statcallb ret=%d", ret);
@@ -533,7 +383,7 @@
FsmChangeState(fi, ST_IN_PROCEED_SEND);
chanp->d_st->lli.l4l3(chanp->d_st, CC_PROCEED_SEND | REQUEST, chanp->proc);
if (ret == 5) {
- chanp->setup = ic.parm.setup;
+ memcpy (&chanp->setup, &ic.parm.setup, sizeof(chanp->setup));
chanp->d_st->lli.l4l3(chanp->d_st, CC_REDIR | REQUEST, chanp->proc);
}
break;
@@ -1656,7 +1506,7 @@
link_debug(chanp, 1, "DIAL %s -> %s (%d,%d)",
ic->parm.setup.eazmsn, ic->parm.setup.phone,
ic->parm.setup.si1, ic->parm.setup.si2);
- chanp->setup = ic->parm.setup;
+ memcpy (&chanp->setup, &ic->parm.setup, sizeof (chanp->setup));
if (!strcmp(chanp->setup.eazmsn, "0"))
chanp->setup.eazmsn[0] = '\0';
/* this solution is dirty and may be change, if
@@ -1872,7 +1722,7 @@
chanp = csta->channel + ic->arg;
if (chanp->debug & 1)
link_debug(chanp, 1, "REDIR");
- chanp->setup = ic->parm.setup;
+ memcpy (&chanp->setup, &ic->parm.setup, sizeof(chanp->setup));
FsmEvent(&chanp->fi, EV_REDIR, NULL);
break;
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)