patch-2.4.0-test6 linux/Documentation/networking/olympic.txt
Next file: linux/Documentation/networking/shaper.txt
Previous file: linux/Documentation/networking/iphase.txt
Back to the patch index
Back to the overall index
- Lines: 26
- Date:
Fri Jul 28 12:50:51 2000
- Orig file:
v2.4.0-test5/linux/Documentation/networking/olympic.txt
- Orig date:
Mon Jul 5 19:54:55 1999
diff -u --recursive --new-file v2.4.0-test5/linux/Documentation/networking/olympic.txt linux/Documentation/networking/olympic.txt
@@ -38,14 +38,14 @@
message_level: Controls level of messages created by the driver. Defaults to 0:
which only displays start-up and critical messages. Presently any non-zero
value will display all soft messages as well. NB This does not turn
-debuging messages on, that must be done by modified the source code.
+debugging messages on, that must be done by modified the source code.
Multi-card:
The driver will detect multiple cards and will work with shared interrupts,
each card is assigned the next token ring device, i.e. tr0 , tr1, tr2. The
driver should also happily reside in the system with other drivers. It has
-been tested with ibmtr.c running, and I personnally have had one Olicom PCI
+been tested with ibmtr.c running, and I personally have had one Olicom PCI
card and two IBM olympic cards (all on the same interrupt), all running
together.
@@ -68,7 +68,7 @@
by the driver and the source and destination addresses printed.
Also an entry will be added in /proc/net called olympic_tr. This
displays low level information about the configuration of the ring and
-the adapter. This feature has been designed for network adiministrators
+the adapter. This feature has been designed for network administrators
to assist in the diagnosis of network / ring problems.
6/8/99 Peter De Schrijver and Mike Phillips
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)