patch-2.4.0-test5 linux/Documentation/video4linux/bttv/Insmod-options

• Lines: 41
• Date: Tue Jul 18 22:35:33 2000
• Orig file: v2.4.0-test4/linux/Documentation/video4linux/bttv/Insmod-options
• Orig date: Fri Jun 23 21:55:07 2000

diff -u --recursive --new-file v2.4.0-test4/linux/Documentation/video4linux/bttv/Insmod-options linux/Documentation/video4linux/bttv/Insmod-options
@@ -10,8 +10,8 @@
 			1: 28 MHz crystal installed
 			2: 35 MHz crystal installed
 		triton1=0/1     for Triton1 compatibility
-                                Triton1 is automatically recognized
-                                but this might also help with other chipsets
+				Triton1 is automatically recognized
+				but this might also help with other chipsets
 		bigendian=n	Set the endianness of the gfx framebuffer.
 				Default is native endian.
 		fieldnr=0/1	Count fields.  Some TV descrambling software
@@ -19,14 +19,14 @@
 				50 useless IRQs/sec.  default is 0 (off).
 		autoload=0/1	autoload helper modules (tuner, audio).
 				default is 1 (on).
-		verbose=0/1/2	verbose level (at insmod time, while looking at
-				the hardware).  default is 1.
-		debug=0/1	debug messages (for capture).
+		bttv_verbose=0/1/2  verbose level (at insmod time, while looking
+				at the hardware).  default is 1.
+		bttv_debug=0/1	debug messages (for capture).
 				default is 0 (off).
 		gbuffers=2-64	number of capture buffers for mmap'ed capture.
 				default is 2.
-                gbufsize=n      size of capture buffers. default and
-                                maximum value is 0x208000 (~2MB)
+		gbufsize=	size of capture buffers. default and
+				maximum value is 0x208000 (~2MB)
 
 	remap, card, radio and pll accept up to four comma-separated arguments
 	(for multiple boards).
@@ -63,7 +63,8 @@
 				2 is more verbose.
 		simple=1	Use the "short programming" method.  Newer
 				msp34xx versions support this.  You need this
-				for dbx stereo.
+				for dbx stereo.  Default is on if supported by
+				the chip.
 		once=1		Don't check the TV-stations Audio mode
 				every few seconds, but only once after
 				channel switches.