patch-2.4.0-test2 linux/drivers/ide/Config.in

• Lines: 90
• Date: Tue Jun 20 13:58:42 2000
• Orig file: v2.4.0-test1/linux/drivers/ide/Config.in
• Orig date: Mon Jun 19 16:31:59 2000

diff -u --recursive --new-file v2.4.0-test1/linux/drivers/ide/Config.in linux/drivers/ide/Config.in
@@ -1,6 +1,8 @@
 #
 # IDE ATA ATAPI Block device driver configuration
 #
+# Andre Hedrick <andre@linux-ide.org>
+#
 mainmenu_option next_comment
 comment 'IDE, ATA and ATAPI Block devices'
 
@@ -21,6 +23,9 @@
    dep_mbool '    Seagate Vendor Specific' CONFIG_BLK_DEV_IDEDISK_SEAGATE $CONFIG_BLK_DEV_IDEDISK_VENDOR
    dep_mbool '    Western Digital Vendor Specific' CONFIG_BLK_DEV_IDEDISK_WD $CONFIG_BLK_DEV_IDEDISK_VENDOR
 
+   define_bool CONFIG_BLK_DEV_COMMERIAL n
+   dep_mbool '    TiVo Commerial Application Specific' CONFIG_BLK_DEV_TIVO $CONFIG_BLK_DEV_COMMERIAL
+
    dep_tristate '  PCMCIA IDE support' CONFIG_BLK_DEV_IDECS $CONFIG_BLK_DEV_IDE $CONFIG_PCMCIA
    dep_tristate '  Include IDE/ATAPI CDROM support' CONFIG_BLK_DEV_IDECD $CONFIG_BLK_DEV_IDE
    dep_tristate '  Include IDE/ATAPI TAPE support' CONFIG_BLK_DEV_IDETAPE $CONFIG_BLK_DEV_IDE
@@ -44,32 +49,28 @@
 	    dep_bool '      ATA Work(s) In Progress (EXPERIMENTAL)' CONFIG_IDEDMA_PCI_WIP $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_EXPERIMENTAL
 	    dep_bool '      Good-Bad DMA Model-Firmware (WIP)' CONFIG_IDEDMA_NEW_DRIVE_LISTINGS $CONFIG_IDEDMA_PCI_WIP
 	    dep_bool '    AEC62XX chipset support' CONFIG_BLK_DEV_AEC62XX $CONFIG_BLK_DEV_IDEDMA_PCI
-	    dep_mbool '      AEC62XX Tuning support (WIP)' CONFIG_AEC62XX_TUNING $CONFIG_BLK_DEV_AEC62XX $CONFIG_IDEDMA_PCI_WIP
+	    dep_mbool '      AEC62XX Tuning support' CONFIG_AEC62XX_TUNING $CONFIG_BLK_DEV_AEC62XX
 	    dep_bool '    ALI M15x3 chipset support' CONFIG_BLK_DEV_ALI15X3 $CONFIG_BLK_DEV_IDEDMA_PCI
 	    dep_mbool '      ALI M15x3 WDC support (DANGEROUS)' CONFIG_WDC_ALI15X3 $CONFIG_BLK_DEV_ALI15X3
 	    dep_bool '    AMD Viper support' CONFIG_BLK_DEV_AMD7409 $CONFIG_BLK_DEV_IDEDMA_PCI
 	    dep_mbool '      AMD Viper ATA-66 Override (WIP)' CONFIG_AMD7409_OVERRIDE $CONFIG_BLK_DEV_AMD7409 $CONFIG_IDEDMA_PCI_WIP
 	    dep_bool '    CMD64X chipset support' CONFIG_BLK_DEV_CMD64X $CONFIG_BLK_DEV_IDEDMA_PCI
-	    dep_mbool '      CMD64X chipset RAID (WIP)' CONFIG_CMD64X_RAID $CONFIG_BLK_DEV_CMD64X $CONFIG_IDEDMA_PCI_WIP
-	    dep_bool '    CY82C693 chipset support (EXPERIMENTAL)' CONFIG_BLK_DEV_CY82C693 $CONFIG_BLK_DEV_IDEDMA_PCI
+	    dep_bool '    CY82C693 chipset support' CONFIG_BLK_DEV_CY82C693 $CONFIG_BLK_DEV_IDEDMA_PCI
 	    dep_bool '    Cyrix CS5530 MediaGX chipset support' CONFIG_BLK_DEV_CS5530 $CONFIG_BLK_DEV_IDEDMA_PCI
   	    dep_bool '    HPT34X chipset support' CONFIG_BLK_DEV_HPT34X $CONFIG_BLK_DEV_IDEDMA_PCI
 	    dep_mbool '      HPT34X AUTODMA support (WIP)' CONFIG_HPT34X_AUTODMA $CONFIG_BLK_DEV_HPT34X $CONFIG_IDEDMA_PCI_WIP
 	    dep_bool '    HPT366 chipset support' CONFIG_BLK_DEV_HPT366 $CONFIG_BLK_DEV_IDEDMA_PCI
-	    dep_bool '      HPT366 Fast Interrupts (WIP)' CONFIG_HPT366_FIP $CONFIG_BLK_DEV_HPT366 $CONFIG_IDEDMA_PCI_WIP
-	    dep_mbool '      HPT366 mode Three (WIP)' CONFIG_HPT366_MODE3 $CONFIG_BLK_DEV_HPT366 $CONFIG_IDEDMA_PCI_WIP
 	    if [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" ]; then
 	       dep_mbool '    Intel PIIXn chipsets support' CONFIG_BLK_DEV_PIIX $CONFIG_BLK_DEV_IDEDMA_PCI
 	       dep_mbool '      PIIXn Tuning support' CONFIG_PIIX_TUNING $CONFIG_BLK_DEV_PIIX $CONFIG_IDEDMA_PCI_AUTO
 	    fi
 	    dep_bool '    NS87415 chipset support (EXPERIMENTAL)' CONFIG_BLK_DEV_NS87415 $CONFIG_BLK_DEV_IDEDMA_PCI
 	    dep_bool '    OPTi 82C621 chipset enhanced support (EXPERIMENTAL)' CONFIG_BLK_DEV_OPTI621 $CONFIG_EXPERIMENTAL
-	    dep_bool '    PROMISE PDC20246/PDC20262 support' CONFIG_BLK_DEV_PDC202XX $CONFIG_BLK_DEV_IDEDMA_PCI
+	    dep_bool '    PROMISE PDC20246/PDC20262/PDC20267 support' CONFIG_BLK_DEV_PDC202XX $CONFIG_BLK_DEV_IDEDMA_PCI
 	    dep_bool '      Special UDMA Feature' CONFIG_PDC202XX_BURST $CONFIG_BLK_DEV_PDC202XX
-	    dep_mbool '      Special Mode Feature (WIP)' CONFIG_PDC202XX_MASTER $CONFIG_BLK_DEV_PDC202XX $CONFIG_IDEDMA_PCI_WIP
 	    dep_bool '    SiS5513 chipset support' CONFIG_BLK_DEV_SIS5513 $CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_X86
 	    dep_bool '    Tekram TRM290 chipset support (EXPERIMENTAL)' CONFIG_BLK_DEV_TRM290 $CONFIG_BLK_DEV_IDEDMA_PCI
-	    dep_bool '    VIA82CXXX chipset support (EXPERIMENTAL)' CONFIG_BLK_DEV_VIA82CXXX $CONFIG_BLK_DEV_IDEDMA_PCI
+	    dep_bool '    VIA82CXXX chipset support' CONFIG_BLK_DEV_VIA82CXXX $CONFIG_BLK_DEV_IDEDMA_PCI
 	    dep_mbool '      VIA82CXXX Tuning support (WIP)' CONFIG_VIA82CXXX_TUNING $CONFIG_BLK_DEV_VIA82CXXX $CONFIG_IDEDMA_PCI_WIP
          fi
 	 if [ "$CONFIG_PPC" = "y" -o "$CONFIG_ARM" = "y" ]; then
@@ -81,14 +82,13 @@
 	 dep_bool '      PowerMac IDE DMA support' CONFIG_BLK_DEV_IDEDMA_PMAC $CONFIG_BLK_DEV_IDE_PMAC
 	 dep_bool '        Use DMA by default' CONFIG_IDEDMA_PMAC_AUTO $CONFIG_BLK_DEV_IDEDMA_PMAC
 	 define_bool CONFIG_BLK_DEV_IDEDMA $CONFIG_BLK_DEV_IDEDMA_PMAC
-	 define_bool CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDEDMA_PMAC
+	 define_bool CONFIG_BLK_DEV_IDEPCI $CONFIG_BLK_DEV_IDEDMA_PMAC
       fi
       if [ "$CONFIG_ARCH_ACORN" = "y" ]; then
 	 dep_bool '    ICS IDE interface support' CONFIG_BLK_DEV_IDE_ICSIDE $CONFIG_ARCH_ACORN
 	 dep_bool '      ICS DMA support' CONFIG_BLK_DEV_IDEDMA_ICS $CONFIG_BLK_DEV_IDE_ICSIDE
 	 dep_bool '        Use ICS DMA by default' CONFIG_IDEDMA_ICS_AUTO $CONFIG_BLK_DEV_IDEDMA_ICS
 	 define_bool CONFIG_BLK_DEV_IDEDMA $CONFIG_BLK_DEV_IDEDMA_ICS
-	 define_bool CONFIG_BLK_DEV_IDEDMA_PCI $CONFIG_BLK_DEV_IDEDMA_ICS
 	 dep_bool '    RapIDE interface support' CONFIG_BLK_DEV_IDE_RAPIDE $CONFIG_ARCH_ACORN
       fi
       if [ "$CONFIG_AMIGA" = "y" ]; then
@@ -132,6 +132,17 @@
    define_bool CONFIG_IDEDMA_AUTO n
 fi
 
+if [ "$CONFIG_BLK_DEV_IDEDMA_PCI" = "y" -o \
+     "$CONFIG_BLK_DEV_IDEDMA_PMAC" = "y" -o \
+     "$CONFIG_BLK_DEV_IDEDMA_ICS" = "y" ]; then
+   bool '  IGNORE word93 Validation BITS' CONFIG_IDEDMA_IVB
+fi
+
+if [ "$CONFIG_BLK_DEV_TIVO" = "y" ]; then
+  define_bool CONFIG_DMA_NONPCI y
+else
+  define_bool CONFIG_DMA_NONPCI n
+fi
 if [ "$CONFIG_IDE_CHIPSETS" = "y" -o \
      "$CONFIG_BLK_DEV_AEC62XX" = "y" -o \
      "$CONFIG_BLK_DEV_ALI15X3" = "y" -o \