patch-2.4.0-test12 linux/drivers/char/serial167.c
Next file: linux/drivers/char/specialix.c
Previous file: linux/drivers/char/serial.c
Back to the patch index
Back to the overall index
- Lines: 433
- Date:
Mon Nov 27 17:11:26 2000
- Orig file:
v2.4.0-test11/linux/drivers/char/serial167.c
- Orig date:
Tue Oct 31 12:42:26 2000
diff -u --recursive --new-file v2.4.0-test11/linux/drivers/char/serial167.c linux/drivers/char/serial167.c
@@ -31,8 +31,18 @@
* Revision 1.36.1.4 1995/03/29 06:14:14 bentson
* disambiguate between Cyclom-16Y and Cyclom-32Ye;
*
+ * Changes:
+ *
* 200 lines of changes record removed - RGH 11-10-95, starting work on
* converting this to drive serial ports on mvme166 (cd2401).
+ *
+ * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 2000/08/25
+ * - get rid of verify_area
+ * - use get_user to access memory from userspace in set_threshold,
+ * set_default_threshold and set_timeout
+ * - don't use the panic function in serial167_init
+ * - do resource release on failure on serial167_init
+ * - include missing restore_flags in mvme167_serial_console_setup
*/
#include <linux/config.h>
@@ -68,17 +78,6 @@
#include <asm/uaccess.h>
#include <linux/init.h>
-#define cy_put_user put_user
-
-static unsigned long cy_get_user(unsigned long *addr)
-{
- unsigned long result = 0;
- int error = get_user (result, addr);
- if (error)
- printk ("serial167: cy_get_user: error == %d\n", error);
- return result;
-}
-
#define SERIAL_PARANOIA_CHECK
#undef SERIAL_DEBUG_OPEN
#undef SERIAL_DEBUG_THROTTLE
@@ -1259,7 +1258,11 @@
if (from_user) {
down(&tmp_buf_sem);
- copy_from_user(tmp_buf, buf, c);
+ if (copy_from_user(tmp_buf, buf, c)) {
+ up(&tmp_buf_sem);
+ restore_flags(flags);
+ return 0;
+ }
c = MIN(c, MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
SERIAL_XMIT_SIZE - info->xmit_head));
memcpy(info->xmit_buf + info->xmit_head, tmp_buf, c);
@@ -1435,8 +1438,7 @@
tmp.close_delay = info->close_delay;
tmp.custom_divisor = 0; /*!!!*/
tmp.hub6 = 0; /*!!!*/
- copy_to_user(retinfo,&tmp,sizeof(*retinfo));
- return 0;
+ return copy_to_user(retinfo,&tmp,sizeof(*retinfo)) ? -EFAULT : 0;
} /* get_serial_info */
static int
@@ -1449,7 +1451,8 @@
/* CP('s'); */
if (!new_info)
return -EFAULT;
- copy_from_user(&new_serial,new_info,sizeof(new_serial));
+ if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
+ return -EFAULT;
old_info = *info;
if (!suser()) {
@@ -1503,8 +1506,7 @@
| ((status & CyDCD) ? TIOCM_CAR : 0)
| ((status & CyDSR) ? TIOCM_DSR : 0)
| ((status & CyCTS) ? TIOCM_CTS : 0);
- cy_put_user(result,(unsigned int *) value);
- return 0;
+ return put_user(result,(unsigned int *) value);
} /* get_modem_info */
static int
@@ -1514,8 +1516,10 @@
int channel;
volatile unsigned char *base_addr = (u_char *)BASE_ADDR;
unsigned long flags;
- unsigned int arg = cy_get_user((unsigned long *) value);
-
+ unsigned int arg;
+
+ if (get_user(arg, (unsigned long *) value))
+ return -EFAULT;
channel = info->line;
switch (cmd) {
@@ -1612,7 +1616,8 @@
get_mon_info(struct cyclades_port * info, struct cyclades_monitor * mon)
{
- copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor));
+ if (copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor)))
+ return -EFAULT;
info->mon.int_count = 0;
info->mon.char_count = 0;
info->mon.char_max = 0;
@@ -1621,13 +1626,16 @@
}
static int
-set_threshold(struct cyclades_port * info, unsigned long value)
+set_threshold(struct cyclades_port * info, unsigned long *arg)
{
volatile unsigned char *base_addr = (u_char *)BASE_ADDR;
+ unsigned long value;
int channel;
- channel = info->line;
+ if (get_user(value, arg))
+ return -EFAULT;
+ channel = info->line;
info->cor4 &= ~CyREC_FIFO;
info->cor4 |= value & CyREC_FIFO;
base_addr[CyCOR4] = info->cor4;
@@ -1644,13 +1652,17 @@
channel = info->line;
tmp = base_addr[CyCOR4] & CyREC_FIFO;
- cy_put_user(tmp,value);
- return 0;
+ return put_user(tmp,value);
}
static int
-set_default_threshold(struct cyclades_port * info, unsigned long value)
+set_default_threshold(struct cyclades_port * info, unsigned long *arg)
{
+ unsigned long value;
+
+ if (get_user(value, arg))
+ return -EFAULT;
+
info->default_threshold = value & 0x0f;
return 0;
}
@@ -1658,15 +1670,18 @@
static int
get_default_threshold(struct cyclades_port * info, unsigned long *value)
{
- cy_put_user(info->default_threshold,value);
- return 0;
+ return put_user(info->default_threshold,value);
}
static int
-set_timeout(struct cyclades_port * info, unsigned long value)
+set_timeout(struct cyclades_port * info, unsigned long *arg)
{
volatile unsigned char *base_addr = (u_char *)BASE_ADDR;
int channel;
+ unsigned long value;
+
+ if (get_user(value, arg))
+ return -EFAULT;
channel = info->line;
@@ -1685,8 +1700,7 @@
channel = info->line;
tmp = base_addr[CyRTPRL];
- cy_put_user(tmp,value);
- return 0;
+ return put_user(tmp,value);
}
static int
@@ -1699,15 +1713,14 @@
static int
get_default_timeout(struct cyclades_port * info, unsigned long *value)
{
- cy_put_user(info->default_timeout,value);
- return 0;
+ return put_user(info->default_timeout,value);
}
static int
cy_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
{
- int error;
+ unsigned long val;
struct cyclades_port * info = (struct cyclades_port *)tty->driver_data;
int ret_val = 0;
@@ -1717,57 +1730,27 @@
switch (cmd) {
case CYGETMON:
- error = verify_area(VERIFY_WRITE, (void *) arg
- ,sizeof(struct cyclades_monitor));
- if (error){
- ret_val = error;
- break;
- }
ret_val = get_mon_info(info, (struct cyclades_monitor *)arg);
break;
case CYGETTHRESH:
- error = verify_area(VERIFY_WRITE, (void *) arg
- ,sizeof(unsigned long));
- if (error){
- ret_val = error;
- break;
- }
ret_val = get_threshold(info, (unsigned long *)arg);
break;
case CYSETTHRESH:
- ret_val = set_threshold(info, (unsigned long)arg);
+ ret_val = set_threshold(info, (unsigned long *)arg);
break;
case CYGETDEFTHRESH:
- error = verify_area(VERIFY_WRITE, (void *) arg
- ,sizeof(unsigned long));
- if (error){
- ret_val = error;
- break;
- }
ret_val = get_default_threshold(info, (unsigned long *)arg);
break;
case CYSETDEFTHRESH:
- ret_val = set_default_threshold(info, (unsigned long)arg);
+ ret_val = set_default_threshold(info, (unsigned long *)arg);
break;
case CYGETTIMEOUT:
- error = verify_area(VERIFY_WRITE, (void *) arg
- ,sizeof(unsigned long));
- if (error){
- ret_val = error;
- break;
- }
ret_val = get_timeout(info, (unsigned long *)arg);
break;
case CYSETTIMEOUT:
- ret_val = set_timeout(info, (unsigned long)arg);
+ ret_val = set_timeout(info, (unsigned long *)arg);
break;
case CYGETDEFTIMEOUT:
- error = verify_area(VERIFY_WRITE, (void *) arg
- ,sizeof(unsigned long));
- if (error){
- ret_val = error;
- break;
- }
ret_val = get_default_timeout(info, (unsigned long *)arg);
break;
case CYSETDEFTIMEOUT:
@@ -1776,7 +1759,7 @@
case TCSBRK: /* SVID version: non-zero arg --> no break */
ret_val = tty_check_change(tty);
if (ret_val)
- return ret_val;
+ break;
tty_wait_until_sent(tty,0);
if (!arg)
send_break(info, HZ/4); /* 1/4 second */
@@ -1784,7 +1767,7 @@
case TCSBRKP: /* support for POSIX tcsendbreak() */
ret_val = tty_check_change(tty);
if (ret_val)
- return ret_val;
+ break;
tty_wait_until_sent(tty,0);
send_break(info, arg ? arg*(HZ/10) : HZ/4);
break;
@@ -1796,46 +1779,20 @@
/* The following commands are incompletely implemented!!! */
case TIOCGSOFTCAR:
- error = verify_area(VERIFY_WRITE, (void *) arg
- ,sizeof(unsigned int *));
- if (error){
- ret_val = error;
- break;
- }
- cy_put_user(C_CLOCAL(tty) ? 1 : 0,
- (unsigned long *) arg);
+ ret_val = put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long *) arg);
break;
case TIOCSSOFTCAR:
- error = verify_area(VERIFY_READ, (void *) arg
- ,sizeof(unsigned long *));
- if (error){
- ret_val = error;
- break;
- }
-
- arg = cy_get_user((unsigned long *) arg);
+ ret_val = get_user(val, (unsigned long *) arg);
+ if (ret_val)
+ break;
tty->termios->c_cflag =
- ((tty->termios->c_cflag & ~CLOCAL) |
- (arg ? CLOCAL : 0));
+ ((tty->termios->c_cflag & ~CLOCAL) | (val ? CLOCAL : 0));
break;
case TIOCMGET:
- error = verify_area(VERIFY_WRITE, (void *) arg
- ,sizeof(unsigned int *));
- if (error){
- ret_val = error;
- break;
- }
ret_val = get_modem_info(info, (unsigned int *) arg);
break;
case TIOCGSERIAL:
- error = verify_area(VERIFY_WRITE, (void *) arg
- ,sizeof(struct serial_struct));
- if (error){
- ret_val = error;
- break;
- }
- ret_val = get_serial_info(info,
- (struct serial_struct *) arg);
+ ret_val = get_serial_info(info, (struct serial_struct *) arg);
break;
case TIOCSSERIAL:
ret_val = set_serial_info(info,
@@ -2288,6 +2245,7 @@
my_udelay(20000L); /* Allow time for any active o/p to complete */
if(base_addr[CyCCR] != 0x00){
+ restore_flags(flags);
/* printk(" chip is never idle (CCR != 0)\n"); */
return;
}
@@ -2296,6 +2254,7 @@
my_udelay(1000L);
if(base_addr[CyGFRCR] == 0x00){
+ restore_flags(flags);
/* printk(" chip is not responding (GFRCR stayed 0)\n"); */
return;
}
@@ -2384,6 +2343,7 @@
serial167_init(void)
{
struct cyclades_port *info;
+ int ret = 0;
int good_ports = 0;
int port_num = 0;
int index;
@@ -2456,10 +2416,16 @@
cy_callout_driver.major = TTYAUX_MAJOR;
cy_callout_driver.subtype = SERIAL_TYPE_CALLOUT;
- if (tty_register_driver(&cy_serial_driver))
- panic("Couldn't register Cyclom serial driver\n");
- if (tty_register_driver(&cy_callout_driver))
- panic("Couldn't register Cyclom callout driver\n");
+ ret = tty_register_driver(&cy_serial_driver);
+ if (ret) {
+ printk(KERN_ERR "Couldn't register MVME166/7 serial driver\n");
+ return ret;
+ }
+ ret = tty_register_driver(&cy_callout_driver);
+ if (ret) {
+ printk(KERN_ERR "Couldn't register MVME166/7 callout driver\n");
+ goto cleanup_serial_driver;
+ }
init_bh(CYCLADES_BH, do_cyclades_bh);
@@ -2529,16 +2495,32 @@
#ifdef CONFIG_REMOTE_DEBUG
debug_setup();
#endif
- if (request_irq (MVME167_IRQ_SER_ERR, cd2401_rxerr_interrupt, 0,
- "cd2401_errors", cd2401_rxerr_interrupt) ||
- request_irq (MVME167_IRQ_SER_MODEM, cd2401_modem_interrupt, 0,
- "cd2401_modem", cd2401_modem_interrupt) ||
- request_irq (MVME167_IRQ_SER_TX, cd2401_tx_interrupt, 0,
- "cd2401_txints", cd2401_tx_interrupt) ||
- request_irq (MVME167_IRQ_SER_RX, cd2401_rx_interrupt, 0,
- "cd2401_rxints", cd2401_rx_interrupt))
- {
- panic ("Couldn't get serial IRQs");
+ ret = request_irq(MVME167_IRQ_SER_ERR, cd2401_rxerr_interrupt, 0,
+ "cd2401_errors", cd2401_rxerr_interrupt);
+ if (ret) {
+ printk(KERN_ERR "Could't get cd2401_errors IRQ");
+ goto cleanup_callout_driver;
+ }
+
+ ret = request_irq(MVME167_IRQ_SER_MODEM, cd2401_modem_interrupt, 0,
+ "cd2401_modem", cd2401_modem_interrupt);
+ if (ret) {
+ printk(KERN_ERR "Could't get cd2401_modem IRQ");
+ goto cleanup_irq_cd2401_errors;
+ }
+
+ ret = request_irq(MVME167_IRQ_SER_TX, cd2401_tx_interrupt, 0,
+ "cd2401_txints", cd2401_tx_interrupt);
+ if (ret) {
+ printk(KERN_ERR "Could't get cd2401_txints IRQ");
+ goto cleanup_irq_cd2401_modem;
+ }
+
+ ret = request_irq(MVME167_IRQ_SER_RX, cd2401_rx_interrupt, 0,
+ "cd2401_rxints", cd2401_rx_interrupt);
+ if (ret) {
+ printk(KERN_ERR "Could't get cd2401_rxints IRQ");
+ goto cleanup_irq_cd2401_txints;
}
/* Now we have registered the interrupt handlers, allow the interrupts */
@@ -2550,6 +2532,19 @@
pcc2chip[PccIMLR] = 3; /* Allow PCC2 ints above 3!? */
return 0;
+cleanup_irq_cd2401_txints:
+ free_irq(MVME167_IRQ_SER_TX, cd2401_tx_interrupt);
+cleanup_irq_cd2401_modem:
+ free_irq(MVME167_IRQ_SER_MODEM, cd2401_modem_interrupt);
+cleanup_irq_cd2401_errors:
+ free_irq(MVME167_IRQ_SER_ERR, cd2401_rxerr_interrupt);
+cleanup_callout_driver:
+ if (tty_unregister_driver(&cy_callout_driver))
+ printk(KERN_ERR "Couldn't unregister MVME166/7 callout driver\n");
+cleanup_serial_driver:
+ if (tty_unregister_driver(&cy_serial_driver))
+ printk(KERN_ERR "Couldn't unregister MVME166/7 serial driver\n");
+ return ret;
} /* serial167_init */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)