patch-2.4.0-test12 linux/arch/arm/def-configs/cerf
Next file: linux/arch/arm/def-configs/ebsa110
Previous file: linux/arch/arm/def-configs/brutus
Back to the patch index
Back to the overall index
- Lines: 188
- Date:
Mon Nov 27 17:07:59 2000
- Orig file:
v2.4.0-test11/linux/arch/arm/def-configs/cerf
- Orig date:
Sun Oct 8 10:50:05 2000
diff -u --recursive --new-file v2.4.0-test11/linux/arch/arm/def-configs/cerf linux/arch/arm/def-configs/cerf
@@ -21,8 +21,8 @@
#
# System Type
#
-# CONFIG_ARCH_ARC is not set
-# CONFIG_ARCH_A5K is not set
+# CONFIG_ARCH_ARCA5K is not set
+# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
@@ -35,34 +35,39 @@
# CONFIG_SA1100_ASSABET is not set
# CONFIG_SA1100_BRUTUS is not set
CONFIG_SA1100_CERF=y
+CONFIG_SA1100_CERF_32MB=y
# CONFIG_SA1100_BITSY is not set
# CONFIG_SA1100_LART is not set
# CONFIG_SA1100_THINCLIENT is not set
# CONFIG_SA1100_GRAPHICSCLIENT is not set
+# CONFIG_SA1100_NANOENGINE is not set
# CONFIG_SA1100_VICTOR is not set
+# CONFIG_SA1100_XP860 is not set
# CONFIG_ANGELBOOT is not set
# CONFIG_SA1100_FREQUENCY_SCALE is not set
# CONFIG_SA1100_VOLTAGE_SCALE is not set
-CONFIG_CPU_32=y
-# CONFIG_CPU_26 is not set
-CONFIG_CPU_32v4=y
-CONFIG_CPU_SA1100=y
# CONFIG_ARCH_ACORN is not set
# CONFIG_FOOTBRIDGE is not set
# CONFIG_FOOTBRIDGE_HOST is not set
# CONFIG_FOOTBRIDGE_ADDIN is not set
+CONFIG_CPU_32=y
+# CONFIG_CPU_26 is not set
+CONFIG_CPU_32v4=y
+CONFIG_CPU_SA1100=y
CONFIG_DISCONTIGMEM=y
# CONFIG_PCI is not set
# CONFIG_ISA is not set
# CONFIG_ISA_DMA is not set
+CONFIG_PC_KEYMAP=y
#
# General setup
#
+# CONFIG_SA1100_CERF_CMDLINE is not set
CONFIG_HOTPLUG=y
#
-# PC Card support
+# PCMCIA/CardBus support
#
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_DEBUG is not set
@@ -70,7 +75,7 @@
CONFIG_VIRTUAL_BUS=y
CONFIG_NET=y
CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_NWFPE=y
CONFIG_KCORE_ELF=y
@@ -80,7 +85,7 @@
# CONFIG_BINFMT_MISC is not set
# CONFIG_PM is not set
# CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="keepinitrd"
+CONFIG_CMDLINE="console=ttyS0,38400"
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
CONFIG_LEDS_CPU=y
@@ -126,7 +131,9 @@
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
# CONFIG_IP_ROUTER is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
@@ -282,10 +289,11 @@
#
# Character devices
#
-# CONFIG_VT is not set
+CONFIG_VT=y
+# CONFIG_VT_CONSOLE is not set
CONFIG_SERIAL_SA1100=y
CONFIG_SERIAL_SA1100_CONSOLE=y
-# CONFIG_TOUCHSCREEN_UCB1200 is not set
+CONFIG_TOUCHSCREEN_UCB1200=y
# CONFIG_TOUCHSCREEN_BITSY is not set
# CONFIG_SERIAL is not set
# CONFIG_SERIAL_EXTENDED is not set
@@ -329,9 +337,9 @@
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
+# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_PCMCIA_SERIAL is not set
-# CONFIG_AGP is not set
#
# File systems
@@ -345,6 +353,7 @@
# CONFIG_BFS_FS is not set
# CONFIG_FAT_FS is not set
# CONFIG_EFS_FS is not set
+CONFIG_JFFS_FS_VERBOSE=0
# CONFIG_CRAMFS is not set
# CONFIG_RAMFS is not set
# CONFIG_ISO9660_FS is not set
@@ -367,6 +376,7 @@
# CONFIG_CODA_FS is not set
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
+# CONFIG_ROOT_NFS is not set
# CONFIG_NFSD is not set
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
@@ -376,36 +386,37 @@
#
# Partition Types
#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
+# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
# CONFIG_NLS is not set
#
+# Console drivers
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FB=y
+
+#
+# Frame-buffer support
+#
+CONFIG_FB=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FB_SA1100=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FBCON_ADVANCED is not set
+CONFIG_FBCON_CFB2=y
+CONFIG_FBCON_CFB4=y
+CONFIG_FBCON_CFB8=y
+CONFIG_FBCON_CFB16=y
+# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
+# CONFIG_FBCON_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
# Sound
#
-CONFIG_SOUND=y
-# CONFIG_SOUND_CMPCI is not set
-# CONFIG_SOUND_EMU10K1 is not set
-# CONFIG_SOUND_ES1370 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ESSSOLO1 is not set
-# CONFIG_SOUND_MAESTRO is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
+# CONFIG_SOUND is not set
#
# USB support
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)