patch-2.4.0-test11 linux/drivers/media/video/tvaudio.c

Next file: linux/drivers/media/video/tvaudio.h
Previous file: linux/drivers/media/video/tuner.h
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.4.0-test10/linux/drivers/media/video/tvaudio.c linux/drivers/media/video/tvaudio.c
@@ -0,0 +1,1107 @@
+/*
+ * experimental driver for simple i2c audio chips.
+ *
+ * Copyright (c) 2000 Gerd Knorr
+ * based on code by:
+ *   Eric Sandeen (eric_sandeen@bigfoot.com) 
+ *   Steve VanDeBogart (vandebo@uclink.berkeley.edu)
+ *   Greg Alexander (galexand@acm.org)
+ *
+ * This code is placed under the terms of the GNU General Public License
+ * 
+ * OPTIONS:
+ *   debug - set to 1 if you'd like to see debug messages
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/malloc.h>
+#include <linux/videodev.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/init.h>
+#include <linux/smp_lock.h>
+
+#include "audiochip.h"
+#include "tvaudio.h"
+#include "id.h"
+
+
+/* ---------------------------------------------------------------------- */
+/* insmod args                                                            */
+
+MODULE_PARM(debug,"i");
+static int debug = 0;	/* insmod parameter */
+
+#define dprintk  if (debug) printk
+
+
+/* ---------------------------------------------------------------------- */
+/* our structs                                                            */
+
+#define MAXREGS 64
+
+struct CHIPSTATE;
+typedef int  (*getvalue)(int);
+typedef int  (*checkit)(struct CHIPSTATE*);
+typedef int  (*getmode)(struct CHIPSTATE*);
+typedef void (*setmode)(struct CHIPSTATE*, int mode);
+typedef void (*checkmode)(struct CHIPSTATE*);
+
+/* i2c command */
+typedef struct AUDIOCMD {
+	int             count;             /* # of bytes to send */
+	unsigned char   bytes[MAXREGS+1];  /* addr, data, data, ... */
+} audiocmd;
+
+/* chip description */
+struct CHIPDESC {
+	char       *name;             /* chip name         */
+	int        id;                /* ID */
+	int        addr_lo, addr_hi;  /* i2c address range */
+	int        registers;         /* # of registers    */
+
+	int        *insmodopt;
+	checkit    checkit;
+	int        flags;
+#define CHIP_HAS_VOLUME      1
+#define CHIP_HAS_BASSTREBLE  2
+#define CHIP_HAS_INPUTSEL    4
+
+	/* various i2c command sequences */
+	audiocmd   init;
+
+	/* which register has which value */
+	int    leftreg,rightreg,treblereg,bassreg;
+
+	/* initialize with (defaults to 65535/65535/32768/32768 */
+	int    leftinit,rightinit,trebleinit,bassinit;
+
+	/* functions to convert the values (v4l -> chip) */
+	getvalue volfunc,treblefunc,bassfunc;
+
+	/* get/set mode */
+	getmode  getmode;
+	setmode  setmode;
+
+	/* check / autoswitch audio after channel switches */
+	checkmode  checkmode;
+
+	/* input switch register + values for v4l inputs */
+	int  inputreg;
+	int  inputmap[8];
+	int  inputmute;
+};
+static struct CHIPDESC chiplist[];
+
+/* current state of the chip */
+struct CHIPSTATE {
+	struct i2c_client c;
+
+	/* index into CHIPDESC array */
+	int type;
+
+	/* shadow register set */
+	audiocmd   shadow;
+
+	/* current settings */
+	__u16 left,right,treble,bass;
+
+	/* thread */
+	struct task_struct  *thread;
+	struct semaphore    *notify;
+	wait_queue_head_t    wq;
+	int                  wake,done;
+};
+
+
+/* ---------------------------------------------------------------------- */
+/* i2c adresses                                                           */
+
+static unsigned short normal_i2c[] = {
+	I2C_TDA8425   >> 1,
+	I2C_TEA6300   >> 1,
+	I2C_TEA6420   >> 1,
+	I2C_TDA9840   >> 1,
+	I2C_TDA985x_L >> 1,
+	I2C_TDA985x_H >> 1,
+	I2C_PIC16C54  >> 1,
+	I2C_CLIENT_END };
+static unsigned short normal_i2c_range[2] = { I2C_CLIENT_END, I2C_CLIENT_END };
+static unsigned short probe[2]            = { I2C_CLIENT_END, I2C_CLIENT_END };
+static unsigned short probe_range[2]      = { I2C_CLIENT_END, I2C_CLIENT_END };
+static unsigned short ignore[2]           = { I2C_CLIENT_END, I2C_CLIENT_END };
+static unsigned short ignore_range[2]     = { I2C_CLIENT_END, I2C_CLIENT_END };
+static unsigned short force[2]            = { I2C_CLIENT_END, I2C_CLIENT_END };
+static struct i2c_client_address_data addr_data = {
+	normal_i2c, normal_i2c_range, 
+	probe, probe_range, 
+	ignore, ignore_range, 
+	force
+};
+
+static struct i2c_driver driver;
+static struct i2c_client client_template;
+
+
+/* ---------------------------------------------------------------------- */
+/* i2c I/O functions                                                      */
+
+static int chip_write(struct CHIPSTATE *chip, int subaddr, int val)
+{
+	unsigned char buffer[2];
+
+	if (-1 == subaddr) {
+		dprintk("%s: chip_write: 0x%x\n", chip->c.name, val);
+		chip->shadow.bytes[1] = val;
+		buffer[0] = val;
+		if (1 != i2c_master_send(&chip->c,buffer,1)) {
+			printk(KERN_WARNING "%s: I/O error (write 0x%x)\n",
+			       chip->c.name, val);
+			return -1;
+		}
+	} else {
+		dprintk("%s: chip_write: reg%d=0x%x\n", chip->c.name, subaddr, val);
+		chip->shadow.bytes[subaddr+1] = val;
+		buffer[0] = subaddr;
+		buffer[1] = val;
+		if (2 != i2c_master_send(&chip->c,buffer,2)) {
+			printk(KERN_WARNING "%s: I/O error (write reg%d=0x%x)\n",
+			       chip->c.name, subaddr, val);
+			return -1;
+		}
+	}
+	return 0;
+}
+
+static int chip_read(struct CHIPSTATE *chip)
+{
+	unsigned char buffer;
+
+	if (1 != i2c_master_recv(&chip->c,&buffer,1)) {
+		printk(KERN_WARNING "%s: I/O error (read)\n",
+		       chip->c.name);
+		return -1;
+	}
+	dprintk("%s: chip_read: 0x%x\n",chip->c.name,buffer); 
+	return buffer;
+}
+
+static int chip_read2(struct CHIPSTATE *chip, int subaddr)
+{
+        unsigned char write[1];
+        unsigned char read[1];
+        struct i2c_msg msgs[2] = {
+                { chip->c.addr, 0,        1, write },
+                { chip->c.addr, I2C_M_RD, 1, read  }
+        };
+        write[1] = subaddr;
+
+	if (2 != i2c_transfer(chip->c.adapter,msgs,2)) {
+		printk(KERN_WARNING "%s: I/O error (read2)\n",
+		       chip->c.name);
+		return -1;
+	}
+	dprintk("%s: chip_read2: reg%d=0x%x\n",
+		chip->c.name,subaddr,read[0]); 
+	return read[0];
+}
+
+static int chip_cmd(struct CHIPSTATE *chip, char *name, audiocmd *cmd)
+{
+	int i;
+	
+	if (0 == cmd->count)
+		return 0;
+
+	/* update our shadow register set; print bytes if (debug > 0) */
+	dprintk("%s: chip_cmd(%s): reg=%d, data:",
+		chip->c.name,name,cmd->bytes[0]);
+	for (i = 1; i < cmd->count; i++) {
+		dprintk(" 0x%x",cmd->bytes[i]);
+		chip->shadow.bytes[i+cmd->bytes[0]] = cmd->bytes[i];
+	}
+	dprintk("\n");
+
+	/* send data to the chip */
+	if (cmd->count != i2c_master_send(&chip->c,cmd->bytes,cmd->count)) {
+		printk(KERN_WARNING "%s: I/O error (%s)\n", chip->c.name, name);
+		return -1;
+	}
+	return 0;
+}
+
+/* ---------------------------------------------------------------------- */
+/* kernel thread for doing i2c stuff asyncronly
+ *   right now it is used only to check the audio mode (mono/stereo/whatever)
+ *   some time after switching to another TV channel, then turn on stereo
+ *   if available, ...
+ */
+
+static int chip_thread(void *data)
+{
+        struct CHIPSTATE *chip = data;
+	struct CHIPDESC  *desc = chiplist + chip->type;
+	
+#ifdef CONFIG_SMP
+	lock_kernel();
+#endif
+	daemonize();
+	sigfillset(&current->blocked);
+	strcpy(current->comm,chip->c.name);
+	chip->thread = current;
+#ifdef CONFIG_SMP
+	unlock_kernel();
+#endif
+
+	dprintk("%s: thread started\n", chip->c.name);
+	if(chip->notify != NULL)
+		up(chip->notify);
+
+	for (;;) {
+		if (chip->done)
+			break;
+		if (!chip->wake) {
+			interruptible_sleep_on(&chip->wq);
+			dprintk("%s: thread wakeup\n", chip->c.name);
+			if (chip->done || signal_pending(current))
+				break;
+		}
+		chip->wake = 0;
+
+		/* wait some time -- let the audio hardware
+		   figure the current mode */
+		current->state   = TASK_INTERRUPTIBLE;
+		schedule_timeout(HZ);
+		if (signal_pending(current))
+			break;
+		if (chip->wake)
+			continue;
+
+		dprintk("%s: thread checkmode\n", chip->c.name);
+		desc->checkmode(chip);
+	}
+
+	chip->thread = NULL;
+	dprintk("%s: thread exiting\n", chip->c.name);
+	if(chip->notify != NULL)
+		up(chip->notify);
+
+	return 0;
+}
+
+/* ---------------------------------------------------------------------- */
+/* audio chip descriptions - defines+functions for tda9840                */
+
+#define TDA9840_SW         0x00
+#define TDA9840_LVADJ      0x02
+#define TDA9840_STADJ      0x03
+#define TDA9840_TEST       0x04
+
+#define TDA9840_MONO       0x10
+#define TDA9840_STEREO     0x2a
+#define TDA9840_DUALA      0x12
+#define TDA9840_DUALB      0x1e
+#define TDA9840_DUALAB     0x1a
+#define TDA9840_DUALBA     0x16
+#define TDA9840_EXTERNAL   0x7a
+
+int  tda9840_getmode(struct CHIPSTATE *chip)
+{
+	return VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
+		VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
+}
+
+void tda9840_setmode(struct CHIPSTATE *chip, int mode)
+{
+	int update = 1;
+	int t = chip->shadow.bytes[TDA9840_SW + 1] & ~0x7e;
+	
+	switch (mode) {
+	case VIDEO_SOUND_MONO:
+		t |= TDA9840_MONO;
+		break;
+	case VIDEO_SOUND_STEREO:
+		t |= TDA9840_STEREO;
+		break;
+	case VIDEO_SOUND_LANG1:
+		t |= TDA9840_DUALA;
+		break;
+	case VIDEO_SOUND_LANG2:
+		t |= TDA9840_DUALB;
+		break;
+	default:
+		update = 0;
+	}
+
+	if (update)
+		chip_write(chip, TDA9840_SW, t);
+}
+
+/* ---------------------------------------------------------------------- */
+/* audio chip descriptions - defines+functions for tda985x                */
+
+/* subaddresses for TDA9855 */
+#define TDA9855_VR	0x00 /* Volume, right */
+#define TDA9855_VL	0x01 /* Volume, left */
+#define TDA9855_BA	0x02 /* Bass */
+#define TDA9855_TR	0x03 /* Treble */
+#define TDA9855_SW	0x04 /* Subwoofer - not connected on DTV2000 */
+
+/* subaddresses for TDA9850 */
+#define TDA9850_C4	0x04 /* Control 1 for TDA9850 */
+
+/* subaddesses for both chips */
+#define TDA985x_C5	0x05 /* Control 2 for TDA9850, Control 1 for TDA9855 */
+#define TDA985x_C6	0x06 /* Control 3 for TDA9850, Control 2 for TDA9855 */
+#define TDA985x_C7	0x07 /* Control 4 for TDA9850, Control 3 for TDA9855 */
+#define TDA985x_A1	0x08 /* Alignment 1 for both chips */
+#define TDA985x_A2	0x09 /* Alignment 2 for both chips */
+#define TDA985x_A3	0x0a /* Alignment 3 for both chips */
+
+/* Masks for bits in TDA9855 subaddresses */
+/* 0x00 - VR in TDA9855 */
+/* 0x01 - VL in TDA9855 */
+/* lower 7 bits control gain from -71dB (0x28) to 16dB (0x7f)
+ * in 1dB steps - mute is 0x27 */
+
+
+/* 0x02 - BA in TDA9855 */ 
+/* lower 5 bits control bass gain from -12dB (0x06) to 16.5dB (0x19)
+ * in .5dB steps - 0 is 0x0E */
+
+
+/* 0x03 - TR in TDA9855 */
+/* 4 bits << 1 control treble gain from -12dB (0x3) to 12dB (0xb)
+ * in 3dB steps - 0 is 0x7 */
+
+/* Masks for bits in both chips' subaddresses */
+/* 0x04 - SW in TDA9855, C4/Control 1 in TDA9850 */
+/* Unique to TDA9855: */
+/* 4 bits << 2 control subwoofer/surround gain from -14db (0x1) to 14db (0xf)
+ * in 3dB steps - mute is 0x0 */
+ 
+/* Unique to TDA9850: */
+/* lower 4 bits control stereo noise threshold, over which stereo turns off
+ * set to values of 0x00 through 0x0f for Ster1 through Ster16 */
+
+
+/* 0x05 - C5 - Control 1 in TDA9855 , Control 2 in TDA9850*/
+/* Unique to TDA9855: */
+#define TDA9855_MUTE	1<<7 /* GMU, Mute at outputs */
+#define TDA9855_AVL	1<<6 /* AVL, Automatic Volume Level */
+#define TDA9855_LOUD	1<<5 /* Loudness, 1==off */
+#define TDA9855_SUR	1<<3 /* Surround / Subwoofer 1==.5(L-R) 0==.5(L+R) */
+			     /* Bits 0 to 3 select various combinations
+                              * of line in and line out, only the 
+                              * interesting ones are defined */
+#define TDA9855_EXT	1<<2 /* Selects inputs LIR and LIL.  Pins 41 & 12 */
+#define TDA9855_INT	0    /* Selects inputs LOR and LOL.  (internal) */
+
+/* Unique to TDA9850:  */
+/* lower 4 bits contol SAP noise threshold, over which SAP turns off
+ * set to values of 0x00 through 0x0f for SAP1 through SAP16 */
+
+
+/* 0x06 - C6 - Control 2 in TDA9855, Control 3 in TDA9850 */
+/* Common to TDA9855 and TDA9850: */
+#define TDA985x_SAP	3<<6 /* Selects SAP output, mute if not received */
+#define TDA985x_STEREO	1<<6 /* Selects Stereo ouput, mono if not received */
+#define TDA985x_MONO	0    /* Forces Mono output */
+#define TDA985x_LMU	1<<3 /* Mute (LOR/LOL for 9855, OUTL/OUTR for 9850) */
+
+/* Unique to TDA9855: */
+#define TDA9855_TZCM	1<<5 /* If set, don't mute till zero crossing */
+#define TDA9855_VZCM	1<<4 /* If set, don't change volume till zero crossing*/
+#define TDA9855_LINEAR	0    /* Linear Stereo */
+#define TDA9855_PSEUDO	1    /* Pseudo Stereo */
+#define TDA9855_SPAT_30	2    /* Spatial Stereo, 30% anti-phase crosstalk */
+#define TDA9855_SPAT_50	3    /* Spatial Stereo, 52% anti-phase crosstalk */
+#define TDA9855_E_MONO	7    /* Forced mono - mono select elseware, so useless*/
+
+/* 0x07 - C7 - Control 3 in TDA9855, Control 4 in TDA9850 */
+/* Common to both TDA9855 and TDA9850: */
+/* lower 4 bits control input gain from -3.5dB (0x0) to 4dB (0xF)
+ * in .5dB steps -  0dB is 0x7 */
+
+/* 0x08, 0x09 - A1 and A2 (read/write) */
+/* Common to both TDA9855 and TDA9850: */
+/* lower 5 bites are wideband and spectral expander alignment
+ * from 0x00 to 0x1f - nominal at 0x0f and 0x10 (read/write) */
+#define TDA985x_STP	1<<5 /* Stereo Pilot/detect (read-only) */
+#define TDA985x_SAPP	1<<6 /* SAP Pilot/detect (read-only) */
+#define TDA985x_STS	1<<7 /* Stereo trigger 1= <35mV 0= <30mV (write-only)*/
+
+/* 0x0a - A3 */
+/* Common to both TDA9855 and TDA9850: */
+/* lower 3 bits control timing current for alignment: -30% (0x0), -20% (0x1),
+ * -10% (0x2), nominal (0x3), +10% (0x6), +20% (0x5), +30% (0x4) */
+#define TDA985x_ADJ	1<<7 /* Stereo adjust on/off (wideband and spectral */
+
+int tda9855_volume(int val) { return val/0x2e8+0x27; }
+int tda9855_bass(int val)   { return val/0xccc+0x06; }
+int tda9855_treble(int val) { return (val/0x1c71+0x3)<<1; }
+
+int  tda985x_getmode(struct CHIPSTATE *chip)
+{
+	int mode;
+
+	mode = ((TDA985x_STP | TDA985x_SAPP) & 
+		chip_read(chip)) >> 4;
+	/* Add mono mode regardless of SAP and stereo */
+	/* Allows forced mono */
+	return mode | VIDEO_SOUND_MONO;
+}
+
+void tda985x_setmode(struct CHIPSTATE *chip, int mode)
+{
+	int update = 1;
+	int c6 = chip->shadow.bytes[TDA985x_C6+1] & 0x3f;
+	
+	switch (mode) {
+	case VIDEO_SOUND_MONO:
+		c6 |= TDA985x_MONO;
+		break;
+	case VIDEO_SOUND_STEREO:
+		c6 |= TDA985x_STEREO;
+		break;
+	case VIDEO_SOUND_LANG1:
+		c6 |= TDA985x_SAP;
+		break;
+	default:
+		update = 0;
+	}
+	if (update)
+		chip_write(chip,TDA985x_C6,c6);
+}
+
+
+/* ---------------------------------------------------------------------- */
+/* audio chip descriptions - defines+functions for tda9873h               */
+
+/* Subaddresses for TDA9873H */
+
+#define TDA9873_SW	0x00 /* Switching                    */
+#define TDA9873_AD	0x01 /* Adjust                       */
+#define TDA9873_PT	0x02 /* Port                         */
+
+/* Subaddress 0x00: Switching Data 
+ * B7..B0:
+ *
+ * B1, B0: Input source selection
+ *  0,  0  internal
+ *  1,  0  external stereo
+ *  0,  1  external mono
+ */
+#define TDA9873_INTERNAL    0
+#define TDA9873_EXT_STEREO  2
+#define TDA9873_EXT_MONO    1
+
+/*    B3, B2: output signal select
+ * B4    : transmission mode 
+ *  0, 0, 1   Mono
+ *  1, 0, 0   Stereo
+ *  1, 1, 1   Stereo (reversed channel)    
+ *  0, 0, 0   Dual AB
+ *  0, 0, 1   Dual AA
+ *  0, 1, 0   Dual BB
+ *  0, 1, 1   Dual BA
+ */
+
+#define TDA9873_TR_MONO     4
+#define TDA9873_TR_STEREO   1 << 4
+#define TDA9873_TR_REVERSE  (1 << 3) & (1 << 2)
+#define TDA9873_TR_DUALA    1 << 2
+#define TDA9873_TR_DUALB    1 << 3
+
+/* output level controls
+ * B5:  output level switch (0 = reduced gain, 1 = normal gain)
+ * B6:  mute                (1 = muted)
+ * B7:  auto-mute           (1 = auto-mute enabled)
+ */
+
+#define TDA9873_GAIN_NORMAL 1 << 5
+#define TDA9873_MUTE        1 << 6
+#define TDA9873_AUTOMUTE    1 << 7
+
+/* Subaddress 0x01:  Adjust/standard */
+
+/* Lower 4 bits (C3..C0) control stereo adjustment on R channel (-0.6 - +0.7 dB)
+ * Recommended value is +0 dB
+ */
+
+#define	TDA9873_STEREO_ADJ	0x06 /* 0dB gain */
+
+/* Bits C6..C4 control FM stantard  
+ * C6, C5, C4
+ *  0,  0,  0   B/G (PAL FM)
+ *  0,  0,  1   M
+ *  0,  1,  0   D/K(1)
+ *  0,  1,  1   D/K(2)
+ *  1,  0,  0   D/K(3)
+ *  1,  0,  1   I
+ */
+#define TDA9873_BG		0
+#define TDA9873_M       1
+#define TDA9873_DK1     2
+#define TDA9873_DK2     3
+#define TDA9873_DK3     4
+#define TDA9873_I       5
+
+/* C7 controls identification response time (1=fast/0=normal)
+ */
+#define TDA9873_IDR_NORM 0
+#define TDA9873_IDR_FAST 1 << 7
+
+
+/* Subaddress 0x02: Port data */ 
+
+/* E1, E0   free programmable ports P1/P2
+    0,  0   both ports low
+    0,  1   P1 high
+    1,  0   P2 high
+    1,  1   both ports high
+*/
+
+#define TDA9873_PORTS    3
+
+/* E2: test port */
+#define TDA9873_TST_PORT 1 << 2
+
+/* E5..E3 control mono output channel (together with transmission mode bit B4)
+ *
+ * E5 E4 E3 B4     OUTM
+ *  0  0  0  0     mono
+ *  0  0  1  0     DUAL B
+ *  0  1  0  1     mono (from stereo decoder)
+ */
+#define TDA9873_MOUT_MONO   0
+#define TDA9873_MOUT_FMONO  0
+#define TDA9873_MOUT_DUALA  0 
+#define TDA9873_MOUT_DUALB  1 << 3 
+#define TDA9873_MOUT_ST     1 << 4 
+#define TDA9873_MOUT_EXTM   (1 << 4 ) & (1 << 3)
+#define TDA9873_MOUT_EXTL   1 << 5 
+#define TDA9873_MOUT_EXTR   (1 << 5 ) & (1 << 3)
+#define TDA9873_MOUT_EXTLR  (1 << 5 ) & (1 << 4)
+#define TDA9873_MOUT_MUTE   (1 << 5 ) & (1 << 4) & (1 << 3)
+
+/* Status bits: (chip read) */
+#define TDA9873_PONR        0 /* Power-on reset detected if = 1 */
+#define TDA9873_STEREO      2 /* Stereo sound is identified     */
+#define TDA9873_DUAL        4 /* Dual sound is identified       */
+
+int tda9873_getmode(struct CHIPSTATE *chip)
+{
+	int val,mode;
+
+	val = chip_read(chip);
+	mode = VIDEO_SOUND_MONO;
+	if (val & TDA9873_STEREO)
+		mode |= VIDEO_SOUND_STEREO;
+	if (val & TDA9873_DUAL)
+		mode |= VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
+	dprintk ("tda9873_getmode(): raw chip read: %d, return: %d\n",
+		 val, mode);
+	return mode;
+}
+
+void tda9873_setmode(struct CHIPSTATE *chip, int mode)
+{
+	int sw_data  = chip->shadow.bytes[TDA9873_SW+1] & 0xe3;
+	/*	int adj_data = chip->shadow.bytes[TDA9873_AD+1] ; */
+	dprintk("tda9873_setmode(): chip->shadow.bytes[%d] = %d\n", TDA9873_SW+1, chip->shadow.bytes[TDA9873_SW+1]);
+	dprintk("tda9873_setmode(): sw_data  = %d\n", sw_data);
+
+	switch (mode) {
+	case VIDEO_SOUND_MONO:
+		sw_data |= TDA9873_TR_MONO;   
+		break;
+	case VIDEO_SOUND_STEREO:
+		sw_data |= TDA9873_TR_STEREO;
+		break;
+	case VIDEO_SOUND_LANG1:
+		sw_data |= TDA9873_TR_DUALA;
+		break;
+	case VIDEO_SOUND_LANG2:
+		sw_data |= TDA9873_TR_DUALB;
+		break;
+	}
+	dprintk("tda9873_setmode(): req. mode %d; chip_write: %d\n", mode, sw_data);
+	chip_write(chip,TDA9873_SW,sw_data);
+}
+
+void tda9873_checkmode(struct CHIPSTATE *chip)
+{
+	int mode = tda9873_getmode(chip);
+
+	if (mode & VIDEO_SOUND_STEREO)
+		tda9873_setmode(chip,VIDEO_SOUND_STEREO);
+	if (mode & VIDEO_SOUND_LANG1)
+		tda9873_setmode(chip,VIDEO_SOUND_LANG1);
+}
+
+int tda9873_checkit(struct CHIPSTATE *chip)
+{
+	int rc;
+
+	if (-1 == (rc = chip_read2(chip,254)))
+		return 0;
+	return (rc & ~0x1f) == 0x80;
+}
+
+
+/* ---------------------------------------------------------------------- */
+/* audio chip descriptions - defines+functions for tea6420                */
+
+#define TEA6300_VL         0x00  /* volume left */
+#define TEA6300_VR         0x01  /* volume right */
+#define TEA6300_BA         0x02  /* bass */
+#define TEA6300_TR         0x03  /* treble */
+#define TEA6300_FA         0x04  /* fader control */
+#define TEA6300_S          0x05  /* switch register */
+                                 /* values for those registers: */
+#define TEA6300_S_SA       0x01  /* stereo A input */
+#define TEA6300_S_SB       0x02  /* stereo B */
+#define TEA6300_S_SC       0x04  /* stereo C */
+#define TEA6300_S_GMU      0x80  /* general mute */
+
+#define TEA6420_S_SA       0x00  /* stereo A input */
+#define TEA6420_S_SB       0x01  /* stereo B */
+#define TEA6420_S_SC       0x02  /* stereo C */
+#define TEA6420_S_SD       0x03  /* stereo D */
+#define TEA6420_S_SE       0x04  /* stereo E */
+#define TEA6420_S_GMU      0x05  /* general mute */
+
+int tea6300_shift10(int val) { return val >> 10; }
+int tea6300_shift12(int val) { return val >> 12; }
+
+
+/* ---------------------------------------------------------------------- */
+/* audio chip descriptions - defines+functions for tda8425                */
+
+#define TDA8425_VL         0x00  /* volume left */
+#define TDA8425_VR         0x01  /* volume right */
+#define TDA8425_BA         0x02  /* bass */
+#define TDA8425_TR         0x03  /* treble */
+#define TDA8425_S1         0x08  /* switch functions */
+                                 /* values for those registers: */
+#define TDA8425_S1_OFF     0xEE  /* audio off (mute on) */
+#define TDA8425_S1_ON      0xCE  /* audio on (mute off) - "linear stereo" mode */
+
+int tda8425_shift10(int val) { return val >> 10 | 0xc0; }
+int tda8425_shift12(int val) { return val >> 12 | 0xf0; }
+
+
+/* ---------------------------------------------------------------------- */
+/* audio chip descriptions - defines+functions for pic16c54 (PV951)       */
+
+/* the registers of 16C54, I2C sub address. */
+#define PIC16C54_REG_KEY_CODE     0x01	       /* Not use. */
+#define PIC16C54_REG_MISC         0x02
+
+/* bit definition of the RESET register, I2C data. */
+#define PIC16C54_MISC_RESET_REMOTE_CTL 0x01 /* bit 0, Reset to receive the key */
+                                            /*        code of remote controller */
+#define PIC16C54_MISC_MTS_MAIN         0x02 /* bit 1 */
+#define PIC16C54_MISC_MTS_SAP          0x04 /* bit 2 */
+#define PIC16C54_MISC_MTS_BOTH         0x08 /* bit 3 */
+#define PIC16C54_MISC_SND_MUTE         0x10 /* bit 4, Mute Audio(Line-in and Tuner) */
+#define PIC16C54_MISC_SND_NOTMUTE      0x20 /* bit 5 */
+#define PIC16C54_MISC_SWITCH_TUNER     0x40 /* bit 6	, Switch to Line-in */
+#define PIC16C54_MISC_SWITCH_LINE      0x80 /* bit 7	, Switch to Tuner */
+
+
+/* ---------------------------------------------------------------------- */
+/* audio chip descriptions - struct CHIPDESC                              */
+
+/* insmod options to enable/disable individual audio chips */
+int tda8425  = 1;
+int tda9840  = 1;
+int tda9850  = 1;
+int tda9855  = 1;
+int tda9873  = 1;
+int tea6300  = 0;
+int tea6420  = 1;
+int pic16c54 = 1;
+MODULE_PARM(tda8425,"i");
+MODULE_PARM(tda9840,"i");
+MODULE_PARM(tda9850,"i");
+MODULE_PARM(tda9855,"i");
+MODULE_PARM(tda9873,"i");
+MODULE_PARM(tea6300,"i");
+MODULE_PARM(tea6420,"i");
+MODULE_PARM(pic16c54,"i");
+
+static struct CHIPDESC chiplist[] = {
+	{
+		name:       "tda9840",
+		id:         I2C_DRIVERID_TDA9840,
+		insmodopt:  &tda9840,
+		addr_lo:    I2C_TDA9840 >> 1,
+		addr_hi:    I2C_TDA9840 >> 1,
+		registers:  5,
+
+		getmode:    tda9840_getmode,
+		setmode:    tda9840_setmode,
+
+		init:       { 2, { TDA9840_SW, 0x2a } }
+	},
+	{
+		name:       "tda9873h",
+		id:         I2C_DRIVERID_TDA9873,
+		checkit:    tda9873_checkit,
+		insmodopt:  &tda9873,
+		addr_lo:    I2C_TDA985x_L >> 1,
+		addr_hi:    I2C_TDA985x_H >> 1,
+		registers:  3,
+
+		getmode:    tda9873_getmode,
+		setmode:    tda9873_setmode,
+		checkmode:  tda9873_checkmode,
+
+		init:       { 4, { TDA9873_SW, 0xa0, 0x06, 0x03 } }
+	},
+	{
+		name:       "tda9850",
+		id:         I2C_DRIVERID_TDA9850,
+		insmodopt:  &tda9850,
+		addr_lo:    I2C_TDA985x_L >> 1,
+		addr_hi:    I2C_TDA985x_H >> 1,
+		registers:  11,
+
+		getmode:    tda985x_getmode,
+		setmode:    tda985x_setmode,
+
+		init:       { 8, { TDA9850_C4, 0x08, 0x08, TDA985x_STEREO, 0x07, 0x10, 0x10, 0x03 } }
+	},
+	{
+		name:       "tda9855",
+		id:         I2C_DRIVERID_TDA9855,
+		insmodopt:  &tda9855,
+		addr_lo:    I2C_TDA985x_L >> 1,
+		addr_hi:    I2C_TDA985x_H >> 1,
+		registers:  11,
+		flags:      CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE,
+
+		leftreg:    TDA9855_VR,
+		rightreg:   TDA9855_VL,
+		bassreg:    TDA9855_BA,
+		treblereg:  TDA9855_TR,
+		volfunc:    tda9855_volume,
+		bassfunc:   tda9855_bass,
+		treblefunc: tda9855_treble,
+
+		getmode:    tda985x_getmode,
+		setmode:    tda985x_setmode,
+
+		init:       { 12, { 0, 0x6f, 0x6f, 0x0e, 0x07<<1, 0x8<<2,
+				    TDA9855_MUTE | TDA9855_AVL | TDA9855_LOUD | TDA9855_INT,
+				    TDA985x_STEREO | TDA9855_LINEAR | TDA9855_TZCM | TDA9855_VZCM,
+				    0x07, 0x10, 0x10, 0x03 }}
+	},
+	{
+		name:       "tea6300",
+		id:         I2C_DRIVERID_TEA6300,
+		insmodopt:  &tea6300,
+		addr_lo:    I2C_TEA6300 >> 1,
+		addr_hi:    I2C_TEA6300 >> 1,
+		registers:  6,
+		flags:      CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL,
+
+		leftreg:    TEA6300_VR,
+		rightreg:   TEA6300_VL,
+		bassreg:    TEA6300_BA,
+		treblereg:  TEA6300_TR,
+		volfunc:    tea6300_shift10,
+		bassfunc:   tea6300_shift12,
+		treblefunc: tea6300_shift12,
+
+		inputreg:   TEA6300_S,
+		inputmap:   { TEA6300_S_SA, TEA6300_S_SB, TEA6300_S_SC },
+		inputmute:  TEA6300_S_GMU,
+	},
+	{
+		name:       "tea6420",
+		id:         I2C_DRIVERID_TEA6420,
+		insmodopt:  &tea6420,
+		addr_lo:    I2C_TEA6420 >> 1,
+		addr_hi:    I2C_TEA6420 >> 1,
+		registers:  1,
+		flags:      CHIP_HAS_INPUTSEL,
+
+		inputreg:   -1,
+		inputmap:   { TEA6420_S_SA, TEA6420_S_SB, TEA6420_S_SC },
+		inputmute:  TEA6300_S_GMU,
+	},
+	{
+		name:       "tda8425",
+		id:         I2C_DRIVERID_TDA8425,
+		insmodopt:  &tda8425,
+		addr_lo:    I2C_TDA8425 >> 1,
+		addr_hi:    I2C_TDA8425 >> 1,
+		registers:  9,
+		flags:      CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL,
+
+		leftreg:    TDA8425_VR,
+		rightreg:   TDA8425_VL,
+		bassreg:    TDA8425_BA,
+		treblereg:  TDA8425_TR,
+		volfunc:    tda8425_shift10,
+		bassfunc:   tda8425_shift12,
+		treblefunc: tda8425_shift12,
+
+		inputreg:   TDA8425_S1,
+		inputmap:   { TDA8425_S1_ON, TDA8425_S1_ON, TDA8425_S1_ON },
+		inputmute:  TDA8425_S1_OFF,
+	},
+	{
+		name:       "pic16c54 (PV951)",
+		id:         I2C_DRIVERID_PIC16C54_PV951,
+		insmodopt:  &pic16c54,
+		addr_lo:    I2C_PIC16C54 >> 1,
+		addr_hi:    I2C_PIC16C54>> 1,
+		registers:  2,
+		flags:      CHIP_HAS_INPUTSEL,
+
+		inputreg:   PIC16C54_REG_MISC,
+		inputmap:   {PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_TUNER,
+			     PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_LINE},
+		inputmute:  PIC16C54_MISC_SND_MUTE,
+	},
+	{ name: NULL } /* EOF */
+};
+
+
+/* ---------------------------------------------------------------------- */
+/* i2c registration                                                       */
+
+static int chip_attach(struct i2c_adapter *adap, int addr,
+		       unsigned short flags, int kind)
+{
+	struct CHIPSTATE *chip;
+	struct CHIPDESC  *desc;
+
+	chip = kmalloc(sizeof(*chip),GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+	memset(chip,0,sizeof(*chip));
+	memcpy(&chip->c,&client_template,sizeof(struct i2c_client));
+        chip->c.adapter = adap;
+        chip->c.addr = addr;
+	chip->c.data = chip;
+
+	/* find description for the chip */
+	dprintk("tvaudio: chip @ addr=0x%x\n",addr<<1);
+	for (desc = chiplist; desc->name != NULL; desc++) {
+		if (0 == *(desc->insmodopt))
+			continue;
+		if (addr < desc->addr_lo ||
+		    addr > desc->addr_hi)
+			continue;
+		if (desc->checkit && !desc->checkit(chip))
+			continue;
+		break;
+	}
+	if (desc->name == NULL) {
+		dprintk("tvaudio: no matching chip description found\n");
+		return -EIO;
+	}
+	dprintk("tvaudio: %s matches:%s%s%s\n",desc->name,
+		(desc->flags & CHIP_HAS_VOLUME)     ? " volume"      : "",
+		(desc->flags & CHIP_HAS_BASSTREBLE) ? " bass/treble" : "",
+		(desc->flags & CHIP_HAS_INPUTSEL)   ? " audiomux"    : "");
+
+	/* fill required data structures */
+	strcpy(chip->c.name,desc->name);
+	chip->type = desc-chiplist;
+	chip->shadow.count = desc->registers+1;
+
+	/* register */
+	MOD_INC_USE_COUNT;
+	i2c_attach_client(&chip->c);
+
+	/* initialization  */
+	chip_cmd(chip,"init",&desc->init);
+	if (desc->flags & CHIP_HAS_VOLUME) {
+		chip->left   = desc->leftinit   ? desc->leftinit   : 65536;
+		chip->right  = desc->rightinit  ? desc->rightinit  : 65536;
+		chip_write(chip,desc->leftreg,desc->volfunc(chip->left));
+		chip_write(chip,desc->rightreg,desc->volfunc(chip->right));
+	}
+	if (desc->flags & CHIP_HAS_BASSTREBLE) {
+		chip->treble = desc->trebleinit ? desc->trebleinit : 32768;
+		chip->bass   = desc->bassinit   ? desc->bassinit   : 32768;
+		chip_write(chip,desc->bassreg,desc->bassfunc(chip->bass));
+		chip_write(chip,desc->treblereg,desc->treblefunc(chip->treble));
+	}
+
+	if (desc->checkmode) {
+		/* start async thread */
+		DECLARE_MUTEX_LOCKED(sem);
+		chip->notify = &sem;
+		init_waitqueue_head(&chip->wq);
+		kernel_thread(chip_thread,(void *)chip,0);
+		down(&sem);
+		chip->notify = NULL;
+		chip->wake++;
+		wake_up_interruptible(&chip->wq);
+	}
+	return 0;
+}
+
+static int chip_probe(struct i2c_adapter *adap)
+{
+	if (adap->id == (I2C_ALGO_BIT | I2C_HW_B_BT848))
+		return i2c_probe(adap, &addr_data, chip_attach);
+	return 0;
+}
+
+static int chip_detach(struct i2c_client *client)
+{
+	struct CHIPSTATE *chip = client->data;
+
+	if (NULL != chip->thread) {
+		/* shutdown async thread */
+		DECLARE_MUTEX_LOCKED(sem);
+		chip->notify = &sem;
+		chip->done = 1;
+		wake_up_interruptible(&chip->wq);
+		down(&sem);
+		chip->notify = NULL;
+	}
+	
+	i2c_detach_client(&chip->c);
+	kfree(chip);
+	MOD_DEC_USE_COUNT;
+	return 0;
+}
+
+/* ---------------------------------------------------------------------- */
+/* video4linux interface                                                  */
+
+static int chip_command(struct i2c_client *client,
+			unsigned int cmd, void *arg)
+{
+        __u16 *sarg = arg;
+	struct CHIPSTATE *chip = client->data;
+	struct CHIPDESC  *desc = chiplist + chip->type;
+
+	dprintk("%s: chip_command 0x%x\n",chip->c.name,cmd);
+
+	switch (cmd) {
+	case AUDC_SET_INPUT:
+		if (desc->flags & CHIP_HAS_INPUTSEL) {
+			if (*sarg & 0x80)
+				chip_write(chip,desc->inputreg,desc->inputmute);
+			else
+				chip_write(chip,desc->inputreg,desc->inputmap[*sarg]);
+		}
+		break;
+	/* --- v4l ioctls --- */
+	/* take care: bttv does userspace copying, we'll get a
+	   kernel pointer here... */
+	case VIDIOCGAUDIO:
+	{
+		struct video_audio *va = arg;
+
+		if (desc->flags & CHIP_HAS_VOLUME) {
+			va->flags  |= VIDEO_AUDIO_VOLUME;
+			va->volume  = MAX(chip->left,chip->right);
+			va->balance = (32768*MIN(chip->left,chip->right))/
+				(va->volume ? va->volume : 1);
+		}
+		if (desc->flags & CHIP_HAS_BASSTREBLE) {
+			va->flags |= VIDEO_AUDIO_BASS | VIDEO_AUDIO_TREBLE;
+			va->bass   = chip->bass;
+			va->treble = chip->treble;
+		}
+		if (desc->getmode)
+			va->mode = desc->getmode(chip);
+		else
+			va->mode = VIDEO_SOUND_MONO;
+		break;
+	}
+
+	case VIDIOCSAUDIO:
+	{
+		struct video_audio *va = arg;
+		
+		if (desc->flags & CHIP_HAS_VOLUME) {
+			chip->left = (MIN(65536 - va->balance,32768) *
+				      va->volume) / 32768;
+			chip->right = (MIN(va->balance,32768) *
+				       va->volume) / 32768;
+			chip_write(chip,desc->leftreg,desc->volfunc(chip->left));
+			chip_write(chip,desc->rightreg,desc->volfunc(chip->right));
+		}
+		if (desc->flags & CHIP_HAS_BASSTREBLE) {
+			chip->bass = va->bass;
+			chip->treble = va->treble;
+			chip_write(chip,desc->bassreg,desc->bassfunc(chip->bass));
+			chip_write(chip,desc->treblereg,desc->treblefunc(chip->treble));
+		}
+		if (desc->setmode && va->mode)
+			desc->setmode(chip,va->mode);
+		break;
+	}
+	case VIDIOCSFREQ:
+	{
+		if (desc->checkmode) {
+			desc->setmode(chip,VIDEO_SOUND_MONO);
+			chip->wake++;
+			wake_up_interruptible(&chip->wq);
+			/* the thread will call checkmode() a second later */
+		}
+	}
+	}
+	return 0;
+}
+
+
+static struct i2c_driver driver = {
+        name:            "generic i2c audio driver",
+        id:              I2C_DRIVERID_TVAUDIO, /* FIXME */
+        flags:           I2C_DF_NOTIFY,
+        attach_adapter:  chip_probe,
+        detach_client:   chip_detach,
+        command:         chip_command,
+};
+
+static struct i2c_client client_template =
+{
+        name:   "(unset)",
+        driver: &driver,
+};
+
+int audiochip_init_module(void)
+{
+	struct CHIPDESC  *desc;
+	printk(KERN_INFO "tvaudio: TV audio decoder + audio/video mux driver\n");
+	printk(KERN_INFO "tvaudio: known chips: ");
+	for (desc = chiplist; desc->name != NULL; desc++)
+		printk("%s%s", (desc == chiplist) ? "" : ",",desc->name);
+	printk("\n");
+	i2c_add_driver(&driver);
+	return 0;
+}
+
+void audiochip_cleanup_module(void)
+{
+	i2c_del_driver(&driver);
+}
+
+module_init(audiochip_init_module);
+module_exit(audiochip_cleanup_module);
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)