patch-2.4.0-test10 linux/drivers/block/paride/Makefile

• Lines: 209
• Date: Fri Oct 13 11:40:11 2000
• Orig file: v2.4.0-test9/linux/drivers/block/paride/Makefile
• Orig date: Sun Aug 6 11:23:40 2000

diff -u --recursive --new-file v2.4.0-test9/linux/drivers/block/paride/Makefile linux/drivers/block/paride/Makefile
@@ -1,183 +1,34 @@
 #
-# Makefile for PARIDE
+# Makefile for Parallel port IDE device drivers.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
+# 7 October 2000, Bartlomiej Zolnierkiewicz <bkz@linux-ide.org>
+# Rewritten to use lists instead of if-statements.
 #
-# Note 2! The CFLAGS definitions are now inherited from the
-# parent makes..
-
-SUB_DIRS     := 
-MOD_SUB_DIRS := $(SUB_DIRS)
-ALL_SUB_DIRS := $(SUB_DIRS)
 
 L_TARGET := paride.a
-MX_OBJS  :=
-LX_OBJS  := 
-MI_OBJS  :=
-MIX_OBJS :=
-
-ifeq ($(CONFIG_PARIDE),y)
-  LX_OBJS += paride.o
-else
-  ifeq ($(CONFIG_PARIDE),m)
-    MX_OBJS += paride.o
-  endif
-endif
-
-ifeq ($(CONFIG_PARIDE_PD),y)
-  LX_OBJS += pd.o
-else
-  ifeq ($(CONFIG_PARIDE_PD),m)
-    M_OBJS += pd.o
-  endif
-endif
-
-ifeq ($(CONFIG_PARIDE_PCD),y)
-  LX_OBJS += pcd.o
-else
-  ifeq ($(CONFIG_PARIDE_PCD),m)
-    M_OBJS += pcd.o
-  endif
-endif
-
-ifeq ($(CONFIG_PARIDE_PF),y)
-  LX_OBJS += pf.o
-else
-  ifeq ($(CONFIG_PARIDE_PF),m)
-    M_OBJS += pf.o
-  endif
-endif
-
-ifeq ($(CONFIG_PARIDE_PT),y)
-  LX_OBJS += pt.o
-else
-  ifeq ($(CONFIG_PARIDE_PT),m)
-    M_OBJS += pt.o
-  endif
-endif
-
-ifeq ($(CONFIG_PARIDE_PG),y)
-  LX_OBJS += pg.o
-else
-  ifeq ($(CONFIG_PARIDE_PG),m)
-    M_OBJS += pg.o
-  endif
-endif
-
-ifeq ($(CONFIG_PARIDE_ATEN),y)
-  LX_OBJS += aten.o
-else
-  ifeq ($(CONFIG_PARIDE_ATEN),m)
-    M_OBJS += aten.o
-  endif
-endif
-
-ifeq ($(CONFIG_PARIDE_BPCK),y)
-  LX_OBJS += bpck.o
-else
-  ifeq ($(CONFIG_PARIDE_BPCK),m)
-    M_OBJS += bpck.o
-  endif
-endif
-
-ifeq ($(CONFIG_PARIDE_COMM),y)
-  LX_OBJS += comm.o
-else
-  ifeq ($(CONFIG_PARIDE_COMM),m)
-    M_OBJS += comm.o
-  endif
-endif
-
-ifeq ($(CONFIG_PARIDE_DSTR),y)
-  LX_OBJS += dstr.o
-else
-  ifeq ($(CONFIG_PARIDE_DSTR),m)
-    M_OBJS += dstr.o
-  endif
-endif
 
-ifeq ($(CONFIG_PARIDE_KBIC),y)
-  LX_OBJS += kbic.o
-else
-  ifeq ($(CONFIG_PARIDE_KBIC),m)
-    M_OBJS += kbic.o
-  endif
-endif
+obj-$(CONFIG_PARIDE)		+= paride.o
+obj-$(CONFIG_PARIDE_PD)		+= pd.o
+obj-$(CONFIG_PARIDE_PCD)	+= pcd.o
+obj-$(CONFIG_PARIDE_PF)		+= pf.o
+obj-$(CONFIG_PARIDE_PT)		+= pt.o
+obj-$(CONFIG_PARIDE_PG)		+= pg.o
+obj-$(CONFIG_PARIDE_ATEN)	+= aten.o
+obj-$(CONFIG_PARIDE_BPCK)	+= bpck.o
+obj-$(CONFIG_PARIDE_COMM)	+= comm.o
+obj-$(CONFIG_PARIDE_DSTR)	+= dstr.o
+obj-$(CONFIG_PARIDE_KBIC)	+= kbic.o
+obj-$(CONFIG_PARIDE_EPAT)	+= epat.o
+obj-$(CONFIG_PARIDE_EPIA)	+= epia.o
+obj-$(CONFIG_PARIDE_FIT2)	+= fit2.o
+obj-$(CONFIG_PARIDE_FIT3)	+= fit3.o
+obj-$(CONFIG_PARIDE_FRPW)	+= frpw.o
+obj-$(CONFIG_PARIDE_FRIQ)	+= friq.o
+obj-$(CONFIG_PARIDE_ON20)	+= on20.o
+obj-$(CONFIG_PARIDE_ON26)	+= on26.o
+obj-$(CONFIG_PARIDE_KTTI)	+= ktti.o
 
-ifeq ($(CONFIG_PARIDE_EPAT),y)
-  LX_OBJS += epat.o
-else
-  ifeq ($(CONFIG_PARIDE_EPAT),m)
-    M_OBJS += epat.o
-  endif
-endif
-
-ifeq ($(CONFIG_PARIDE_EPIA),y)
-  LX_OBJS += epia.o
-else
-  ifeq ($(CONFIG_PARIDE_EPIA),m)
-    M_OBJS += epia.o
-  endif
-endif
-
-ifeq ($(CONFIG_PARIDE_FIT2),y)
-  LX_OBJS += fit2.o
-else
-  ifeq ($(CONFIG_PARIDE_FIT2),m)
-    M_OBJS += fit2.o
-  endif
-endif
-
-ifeq ($(CONFIG_PARIDE_FIT3),y)
-  LX_OBJS += fit3.o
-else
-  ifeq ($(CONFIG_PARIDE_FIT3),m)
-    M_OBJS += fit3.o
-  endif
-endif
-
-ifeq ($(CONFIG_PARIDE_FRPW),y)
-  LX_OBJS += frpw.o
-else
-  ifeq ($(CONFIG_PARIDE_FRPW),m)
-    M_OBJS += frpw.o
-  endif
-endif
-
-
-ifeq ($(CONFIG_PARIDE_FRIQ),y)
-  LX_OBJS += friq.o
-else
-  ifeq ($(CONFIG_PARIDE_FRIQ),m)
-    M_OBJS += friq.o
-  endif
-endif
-
-ifeq ($(CONFIG_PARIDE_ON20),y)
-  LX_OBJS += on20.o
-else
-  ifeq ($(CONFIG_PARIDE_ON20),m)
-    M_OBJS += on20.o
-  endif
-endif
-
-ifeq ($(CONFIG_PARIDE_ON26),y)
-  LX_OBJS += on26.o
-else
-  ifeq ($(CONFIG_PARIDE_ON26),m)
-    M_OBJS += on26.o
-  endif
-endif
-
-ifeq ($(CONFIG_PARIDE_KTTI),y)
-  LX_OBJS += ktti.o
-else
-  ifeq ($(CONFIG_PARIDE_KTTI),m)
-    M_OBJS += ktti.o
-  endif
-endif
+L_OBJS	:= $(obj-y)
+M_OBJS	:= $(obj-m)
 
 include $(TOPDIR)/Rules.make
-