patch-2.4.0-test10 linux/Documentation/usb/bluetooth.txt

• Lines: 45
• Date: Mon Oct 9 14:23:49 2000
• Orig file: v2.4.0-test9/linux/Documentation/usb/bluetooth.txt
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.4.0-test9/linux/Documentation/usb/bluetooth.txt linux/Documentation/usb/bluetooth.txt
@@ -0,0 +1,44 @@
+INTRODUCTION
+
+  The USB Bluetooth driver supports any USB Bluetooth device.
+  It currently works well with the Linux USB Bluetooth stack from Axis 
+  (available at http://developer.axis.com/software/bluetooth/ ) and 
+  has been rumored to work with other Linux USB Bluetooth stacks.
+
+
+CONFIGURATION
+
+  Currently the driver can handle up to 256 different USB Bluetooth 
+  devices at once. 
+
+  If you are not using devfs:
+    The major number that the driver uses is 216 so to use the driver,
+    create the following nodes:
+	mknod /dev/ttyUB0 c 216 0
+	mknod /dev/ttyUB1 c 216 1
+	mknod /dev/ttyUB2 c 216 2
+	mknod /dev/ttyUB3 c 216 3
+		.
+		.
+		.
+	mknod /dev/ttyUB254 c 216 254
+	mknod /dev/ttyUB255 c 216 255
+
+  If you are using devfs:
+    The devices supported by this driver will show up as
+    /dev/usb/ttub/{0,1,...}
+
+  When the device is connected and recognized by the driver, the driver
+  will print to the system log, which node the device has been bound to.
+
+
+CONTACT:
+
+  If anyone has any problems using this driver, please contact me, or 
+  join the Linux-USB mailing list (information on joining the mailing 
+  list, as well as a link to its searchable archive is at 
+  http://www.linux-usb.org/ )
+
+
+Greg Kroah-Hartman
+greg@kroah.com