patch-2.2.15 linux/drivers/scsi/pci2220i.h

• Lines: 302
• Date: Wed May 3 22:31:20 2000
• Orig file: v2.2.14/drivers/scsi/pci2220i.h
• Orig date: Sat Aug 14 02:25:42 1999

diff -u --new-file --recursive --exclude-from ../../exclude v2.2.14/drivers/scsi/pci2220i.h linux/drivers/scsi/pci2220i.h
@@ -21,265 +21,11 @@
 #ifndef _PCI2220I_H
 #define _PCI2220I_H
 
-#ifndef	PSI_EIDE_SCSIOP
-#define	PSI_EIDE_SCSIOP	1
-
 #ifndef LINUX_VERSION_CODE
 #include <linux/version.h>
 #endif 
 #define	LINUXVERSION(v,p,s)    (((v)<<16) + ((p)<<8) + (s))
 
-/************************************************/
-/*		Some defines that we like 				*/
-/************************************************/
-#define	CHAR		char
-#define	UCHAR		unsigned char
-#define	SHORT		short
-#define	USHORT		unsigned short
-#define	BOOL		unsigned short
-#define	LONG		long
-#define	ULONG		unsigned long
-#define	VOID		void
-
-#include "psi_dale.h"
-
-/************************************************/
-/*		Timeout konstants		 				*/
-/************************************************/
-#define	TIMEOUT_READY				100			// 100 mSec
-#define	TIMEOUT_DRQ					300			// 300 mSec
-#define	TIMEOUT_DATA				(3 * HZ)	// 3 seconds
-
-/************************************************/
-/*		Misc. macros			 				*/
-/************************************************/
-#define ANY2SCSI(up, p)					\
-((UCHAR *)up)[0] = (((ULONG)(p)) >> 8);	\
-((UCHAR *)up)[1] = ((ULONG)(p));
-
-#define SCSI2LONG(up)					\
-( (((long)*(((UCHAR *)up))) << 16)		\
-+ (((long)(((UCHAR *)up)[1])) << 8)		\
-+ ((long)(((UCHAR *)up)[2])) )
-
-#define XANY2SCSI(up, p)				\
-((UCHAR *)up)[0] = ((long)(p)) >> 24;	\
-((UCHAR *)up)[1] = ((long)(p)) >> 16;	\
-((UCHAR *)up)[2] = ((long)(p)) >> 8;	\
-((UCHAR *)up)[3] = ((long)(p));
-
-#define XSCSI2LONG(up)					\
-( (((long)(((UCHAR *)up)[0])) << 24)	\
-+ (((long)(((UCHAR *)up)[1])) << 16)	\
-+ (((long)(((UCHAR *)up)[2])) <<  8)	\
-+ ((long)(((UCHAR *)up)[3])) )
-
-#define	SelectSpigot(padapter,spigot)	outb_p (spigot, padapter->regStatSel)
-#define WriteCommand(padapter,cmd)		outb_p (cmd, padapter->regStatCmd)
-
-/************************************************/
-/*		SCSI CDB operation codes 				*/
-/************************************************/
-#define SCSIOP_TEST_UNIT_READY		0x00
-#define SCSIOP_REZERO_UNIT			0x01
-#define SCSIOP_REWIND				0x01
-#define SCSIOP_REQUEST_BLOCK_ADDR	0x02
-#define SCSIOP_REQUEST_SENSE		0x03
-#define SCSIOP_FORMAT_UNIT			0x04
-#define SCSIOP_READ_BLOCK_LIMITS	0x05
-#define SCSIOP_REASSIGN_BLOCKS		0x07
-#define SCSIOP_READ6				0x08
-#define SCSIOP_RECEIVE				0x08
-#define SCSIOP_WRITE6				0x0A
-#define SCSIOP_PRINT				0x0A
-#define SCSIOP_SEND					0x0A
-#define SCSIOP_SEEK6				0x0B
-#define SCSIOP_TRACK_SELECT			0x0B
-#define SCSIOP_SLEW_PRINT			0x0B
-#define SCSIOP_SEEK_BLOCK			0x0C
-#define SCSIOP_PARTITION			0x0D
-#define SCSIOP_READ_REVERSE			0x0F
-#define SCSIOP_WRITE_FILEMARKS		0x10
-#define SCSIOP_FLUSH_BUFFER			0x10
-#define SCSIOP_SPACE				0x11
-#define SCSIOP_INQUIRY				0x12
-#define SCSIOP_VERIFY6				0x13
-#define SCSIOP_RECOVER_BUF_DATA		0x14
-#define SCSIOP_MODE_SELECT			0x15
-#define SCSIOP_RESERVE_UNIT			0x16
-#define SCSIOP_RELEASE_UNIT			0x17
-#define SCSIOP_COPY					0x18
-#define SCSIOP_ERASE				0x19
-#define SCSIOP_MODE_SENSE			0x1A
-#define SCSIOP_START_STOP_UNIT		0x1B
-#define SCSIOP_STOP_PRINT			0x1B
-#define SCSIOP_LOAD_UNLOAD			0x1B
-#define SCSIOP_RECEIVE_DIAGNOSTIC	0x1C
-#define SCSIOP_SEND_DIAGNOSTIC		0x1D
-#define SCSIOP_MEDIUM_REMOVAL		0x1E
-#define SCSIOP_READ_CAPACITY		0x25
-#define SCSIOP_READ					0x28
-#define SCSIOP_WRITE				0x2A
-#define SCSIOP_SEEK					0x2B
-#define SCSIOP_LOCATE				0x2B
-#define SCSIOP_WRITE_VERIFY			0x2E
-#define SCSIOP_VERIFY				0x2F
-#define SCSIOP_SEARCH_DATA_HIGH		0x30
-#define SCSIOP_SEARCH_DATA_EQUAL	0x31
-#define SCSIOP_SEARCH_DATA_LOW		0x32
-#define SCSIOP_SET_LIMITS			0x33
-#define SCSIOP_READ_POSITION		0x34
-#define SCSIOP_SYNCHRONIZE_CACHE	0x35
-#define SCSIOP_COMPARE				0x39
-#define SCSIOP_COPY_COMPARE			0x3A
-#define SCSIOP_WRITE_DATA_BUFF		0x3B
-#define SCSIOP_READ_DATA_BUFF		0x3C
-#define SCSIOP_CHANGE_DEFINITION	0x40
-#define SCSIOP_READ_SUB_CHANNEL		0x42
-#define SCSIOP_READ_TOC				0x43
-#define SCSIOP_READ_HEADER			0x44
-#define SCSIOP_PLAY_AUDIO			0x45
-#define SCSIOP_PLAY_AUDIO_MSF		0x47
-#define SCSIOP_PLAY_TRACK_INDEX		0x48
-#define SCSIOP_PLAY_TRACK_RELATIVE	0x49
-#define SCSIOP_PAUSE_RESUME			0x4B
-#define SCSIOP_LOG_SELECT			0x4C
-#define SCSIOP_LOG_SENSE			0x4D
-#define SCSIOP_MODE_SELECT10		0x55
-#define SCSIOP_MODE_SENSE10			0x5A
-#define SCSIOP_LOAD_UNLOAD_SLOT		0xA6
-#define SCSIOP_MECHANISM_STATUS		0xBD
-#define SCSIOP_READ_CD				0xBE
-
-// IDE command definitions
-#define IDE_COMMAND_ATAPI_RESET		0x08
-#define IDE_COMMAND_READ			0x20
-#define IDE_COMMAND_WRITE			0x30
-#define IDE_COMMAND_RECALIBRATE		0x10
-#define IDE_COMMAND_SEEK			0x70
-#define IDE_COMMAND_SET_PARAMETERS	0x91
-#define IDE_COMMAND_VERIFY			0x40
-#define IDE_COMMAND_ATAPI_PACKET	0xA0
-#define IDE_COMMAND_ATAPI_IDENTIFY	0xA1
-#define	IDE_CMD_READ_MULTIPLE		0xC4
-#define	IDE_CMD_WRITE_MULTIPLE		0xC5
-#define	IDE_CMD_SET_MULTIPLE		0xC6
-#define IDE_COMMAND_IDENTIFY		0xEC
-
-// IDE status definitions
-#define IDE_STATUS_ERROR			0x01
-#define IDE_STATUS_INDEX			0x02
-#define IDE_STATUS_CORRECTED_ERROR	0x04
-#define IDE_STATUS_DRQ				0x08
-#define IDE_STATUS_DSC				0x10
-#define	IDE_STATUS_WRITE_FAULT		0x20
-#define IDE_STATUS_DRDY				0x40
-#define IDE_STATUS_BUSY				0x80
-
-// IDE error definitions
-#define	IDE_ERROR_AMNF				0x01
-#define	IDE_ERROR_TKONF				0x02
-#define	IDE_ERROR_ABRT				0x04
-#define	IDE_ERROR_MCR				0x08
-#define	IDE_ERROR_IDFN				0x10
-#define	IDE_ERROR_MC				0x20
-#define	IDE_ERROR_UNC				0x40
-#define	IDE_ERROR_BBK				0x80
-
-// SCSI read capacity structure
-typedef	struct _READ_CAPACITY_DATA
-	{
-	ULONG blks;				/* total blocks (converted to little endian) */
-	ULONG blksiz;			/* size of each (converted to little endian) */
-	}	READ_CAPACITY_DATA, *PREAD_CAPACITY_DATA;
-
-// SCSI inquiry data
-typedef struct _INQUIRYDATA
-	{
-	UCHAR DeviceType			:5;
-	UCHAR DeviceTypeQualifier	:3;
-	UCHAR DeviceTypeModifier	:7;
-	UCHAR RemovableMedia		:1;
-    UCHAR Versions;
-    UCHAR ResponseDataFormat;
-    UCHAR AdditionalLength;
-    UCHAR Reserved[2];
-	UCHAR SoftReset				:1;
-	UCHAR CommandQueue			:1;
-	UCHAR Reserved2				:1;
-	UCHAR LinkedCommands		:1;
-	UCHAR Synchronous			:1;
-	UCHAR Wide16Bit				:1;
-	UCHAR Wide32Bit				:1;
-	UCHAR RelativeAddressing	:1;
-    UCHAR VendorId[8];
-    UCHAR ProductId[16];
-    UCHAR ProductRevisionLevel[4];
-    UCHAR VendorSpecific[20];
-    UCHAR Reserved3[40];
-	}	INQUIRYDATA, *PINQUIRYDATA;
-
-// IDE IDENTIFY data
-#pragma pack (1)
-#pragma align 1
-typedef struct _IDENTIFY_DATA
-	{
-    USHORT	GeneralConfiguration;		//  0
-    USHORT	NumberOfCylinders;			//  1
-    USHORT	Reserved1;					//  2
-    USHORT	NumberOfHeads;				//  3
-    USHORT	UnformattedBytesPerTrack;	//  4
-    USHORT	UnformattedBytesPerSector;	//  5
-    USHORT	SectorsPerTrack;			//  6
-	USHORT	NumBytesISG;				//  7 Byte Len - inter-sector gap
-	USHORT	NumBytesSync;				//  8          - sync field
-	USHORT	NumWordsVUS;				//  9 Len - Vendor Unique Info
-    USHORT	SerialNumber[10];			// 10
-    USHORT	BufferType;					// 20
-    USHORT	BufferSectorSize;			// 21
-    USHORT	NumberOfEccBytes;			// 22
-    USHORT	FirmwareRevision[4];		// 23
-    USHORT	ModelNumber[20];			// 27
-	USHORT	NumSectorsPerInt	:8;		// 47 Multiple Mode - Sec/Blk
-	USHORT	Reserved2			:8;		// 47
-	USHORT	DoubleWordMode;				// 48 flag for double word mode capable
-	USHORT	VendorUnique1		:8;		// 49
-	USHORT	SupportDMA			:1;		// 49 DMA supported
-	USHORT	SupportLBA			:1;		// 49 LBA supported
-	USHORT	SupportIORDYDisable	:1;		// 49 IORDY can be disabled
-	USHORT	SupportIORDY		:1;		// 49 IORDY supported
-	USHORT	ReservedPsuedoDMA	:1;		// 49 reserved for pseudo DMA mode support
-	USHORT	Reserved3			:3;		// 49
-	USHORT	Reserved4;					// 50
-	USHORT	Reserved5			:8;		// 51 Transfer Cycle Timing - PIO
-	USHORT	PIOCycleTime		:8;		// 51 Transfer Cycle Timing - PIO
-	USHORT	Reserved6			:8;		// 52                       - DMA
-	USHORT	DMACycleTime		:8;		// 52                       - DMA
-	USHORT	Valid_54_58			:1;		// 53 words 54 - 58 are vaild
-	USHORT	Valid_64_70			:1;		// 53 words 64 - 70 are valid
-	USHORT	Reserved7			:14;	// 53
-	USHORT	LogNumCyl;					// 54 Current Translation - Num Cyl
-	USHORT	LogNumHeads;				// 55                       Num Heads
-	USHORT	LogSectorsPerTrack;			// 56                       Sec/Trk
-	ULONG	LogTotalSectors;			// 57                       Total Sec
-	USHORT	CurrentNumSecPerInt	:8;		// 59 current setting for number of sectors per interrupt
-	USHORT	ValidNumSecPerInt	:1;		// 59 Current setting is valid for number of sectors per interrupt
-	USHORT	Reserved8			:7;		// 59
-	ULONG	LBATotalSectors;			// 60 LBA Mode - Sectors
-	USHORT	DMASWordFlags;				// 62
-	USHORT	DMAMWordFlags;				// 63
-	USHORT	AdvancedPIOSupport  :8;		// 64 Flow control PIO transfer modes supported
-	USHORT	Reserved9			:8;		// 64
-	USHORT	MinMultiDMACycle;			// 65 minimum multiword DMA transfer cycle time per word
-	USHORT	RecomendDMACycle;			// 66 Manufacturer's recommende multiword DMA transfer cycle time
-	USHORT	MinPIOCycleWithoutFlow;		// 67 Minimum PIO transfer cycle time without flow control
-	USHORT	MinPIOCylceWithFlow;		// 68 Minimum PIO transfer cycle time with IORDY flow control
-	USHORT	ReservedSpace[256-69];		// 69
-	}	IDENTIFY_DATA, *PIDENTIFY_DATA;
-#pragma pack ()
-#pragma align 0
-#endif	// PSI_EIDE_SCSIOP
-
 // function prototypes
 int Pci2220i_Detect			(Scsi_Host_Template *tpnt);
 int Pci2220i_Command		(Scsi_Cmnd *SCpnt);
@@ -301,7 +47,7 @@
 		module:						NULL,									\
 		proc_dir:					&Proc_Scsi_Pci2220i,					\
 		proc_info:					NULL,	/* let's not bloat the kernel */\
-		name:						"PCI-2220I EIDE Disk Controller",		\
+		name:						"PCI-2220I/PCI-2240I",					\
 		detect:						Pci2220i_Detect,						\
 		release:					Pci2220i_Release,						\
 		info:						NULL,	/* let's not bloat the kernel */\
@@ -318,7 +64,7 @@
 		bios_param:					Pci2220i_BiosParam,						\
 		can_queue:					1,										\
 		this_id:					-1,										\
-		sg_tablesize:				SG_NONE,								\
+		sg_tablesize:				SG_ALL,								\
 		cmd_per_lun:				1,										\
 		present:					0,										\
 		unchecked_isa_dma:			0,										\
@@ -329,7 +75,7 @@
 #define PCI2220I { NULL, NULL,						\
 			&Proc_Scsi_Pci2220i,/* proc_dir_entry */\
 			NULL,		                			\
-			"PCI-2220I EIDE Disk Controller",		\
+			"PCI-2220I/PCI-2240I",					\
 			Pci2220i_Detect,						\
 			Pci2220i_Release,						\
 			NULL,	 								\
@@ -341,7 +87,7 @@
 			Pci2220i_BiosParam,                 	\
 			1, 										\
 			-1, 									\
-			SG_NONE,		 						\
+			SG_ALL,		 						\
 			1, 										\
 			0, 										\
 			0, 										\