patch-2.4.21 linux-2.4.21/drivers/net/mac8390.c

Next file: linux-2.4.21/drivers/net/macmace.c
Previous file: linux-2.4.21/drivers/net/lp486e.c
Back to the patch index
Back to the overall index

diff -urN linux-2.4.20/drivers/net/mac8390.c linux-2.4.21/drivers/net/mac8390.c
@@ -0,0 +1,752 @@
+/* mac8390.c: New driver for 8390-based Nubus (or Nubus-alike)
+   Ethernet cards on Linux */
+/* Based on the former daynaport.c driver, by Alan Cox.  Some code
+   taken from or inspired by skeleton.c by Donald Becker, acenic.c by
+   Jes Sorensen, and ne2k-pci.c by Donald Becker and Paul Gortmaker.
+
+   This software may be used and distributed according to the terms of
+   the GNU Public License, incorporated herein by reference.  */
+
+/* 2000-02-28: support added for Dayna and Kinetics cards by 
+   A.G.deWijn@phys.uu.nl */
+/* 2000-04-04: support added for Dayna2 by bart@etpmod.phys.tue.nl */
+/* 2001-04-18: support for DaynaPort E/LC-M by rayk@knightsmanor.org */
+/* 2001-05-15: support for Cabletron ported from old daynaport driver
+ * and fixed access to Sonic Sys card which masquerades as a Farallon 
+ * by rayk@knightsmanor.org */
+
+#include <linux/version.h>
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/nubus.h>
+#include <linux/in.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <asm/system.h>
+#include <asm/bitops.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/hwtest.h>
+#include <asm/macints.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include "8390.h"
+
+#if (LINUX_VERSION_CODE < 0x02030e)
+#define net_device device
+#endif
+
+#define WD_START_PG			0x00	/* First page of TX buffer */
+#define CABLETRON_RX_START_PG		0x00    /* First page of RX buffer */
+#define CABLETRON_RX_STOP_PG		0x30    /* Last page +1 of RX ring */
+#define CABLETRON_TX_START_PG		CABLETRON_RX_STOP_PG  /* First page of TX buffer */
+
+/* Unfortunately it seems we have to hardcode these for the moment */
+/* Shouldn't the card know about this? Does anyone know where to read it off the card? Do we trust the data provided by the card? */
+
+#define DAYNA_8390_BASE		0x80000
+#define DAYNA_8390_MEM		0x00000
+
+#define KINETICS_8390_BASE	0x80000
+#define KINETICS_8390_MEM	0x00000
+
+#define CABLETRON_8390_BASE	0x90000	
+#define CABLETRON_8390_MEM	0x00000
+
+enum mac8390_type {
+	MAC8390_NONE = -1,
+	MAC8390_APPLE,
+	MAC8390_ASANTE,
+	MAC8390_FARALLON,  /* Apple, Asante, and Farallon are all compatible */
+	MAC8390_CABLETRON,
+	MAC8390_DAYNA,
+	MAC8390_INTERLAN,
+	MAC8390_KINETICS,
+	MAC8390_FOCUS,
+	MAC8390_SONICSYS,
+	MAC8390_DAYNA2,
+	MAC8390_DAYNA3,
+};
+
+static const char * cardname[] = {
+	"apple",
+	"asante",
+	"farallon",
+	"cabletron",
+	"dayna",
+	"interlan",
+	"kinetics",
+	"focus",
+	"sonic systems",
+	"dayna2",
+	"dayna_lc",
+};
+
+static int word16[] = {
+	1, /* apple */
+	1, /* asante */
+	1, /* farallon */
+	1, /* cabletron */
+	0, /* dayna */
+	1, /* interlan */
+	0, /* kinetics */
+	1, /* focus (??) */
+	1, /* sonic systems  */
+	1, /* dayna2 */
+	1, /* dayna-lc */
+};
+
+/* on which cards do we use NuBus resources? */
+static int useresources[] = {
+	1, /* apple */
+	1, /* asante */
+	1, /* farallon */
+	0, /* cabletron */
+	0, /* dayna */
+	0, /* interlan */
+	0, /* kinetics */
+	0, /* focus (??) */
+	1, /* sonic systems */
+	1, /* dayna2 */
+	1, /* dayna-lc */
+};
+
+static const char __initdata * version =
+	"mac8390.c: v0.4 2001-05-15 David Huggins-Daines <dhd@debian.org> and others\n";
+		
+extern int mac8390_probe(struct net_device * dev);
+extern enum mac8390_type mac8390_ident(struct nubus_dev * dev);
+extern int mac8390_memsize(unsigned long membase);
+extern int mac8390_memtest(struct net_device * dev);
+extern int mac8390_initdev(struct net_device * dev, struct nubus_dev * ndev,
+			   enum mac8390_type type);
+
+static int mac8390_open(struct net_device * dev);
+static int mac8390_close(struct net_device * dev);
+static void mac8390_no_reset(struct net_device *dev);
+
+/* Sane (32-bit chunk memory read/write) - Apple/Asante/Farallon do this*/
+static void sane_get_8390_hdr(struct net_device *dev,
+			      struct e8390_pkt_hdr *hdr, int ring_page);
+static void sane_block_input(struct net_device * dev, int count,
+			     struct sk_buff * skb, int ring_offset);
+static void sane_block_output(struct net_device * dev, int count,
+			      const unsigned char * buf, const int start_page);
+
+/* dayna_memcpy to and from card */
+static void dayna_memcpy_fromcard(struct net_device *dev, void *to,
+				int from, int count);
+static void dayna_memcpy_tocard(struct net_device *dev, int to,
+			      const void *from, int count);
+
+/* Dayna - Dayna/Kinetics use this */
+static void dayna_get_8390_hdr(struct net_device *dev,
+			       struct e8390_pkt_hdr *hdr, int ring_page);
+static void dayna_block_input(struct net_device *dev, int count,
+			      struct sk_buff *skb, int ring_offset);
+static void dayna_block_output(struct net_device *dev, int count,
+			       const unsigned char *buf, int start_page);
+
+#define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
+#define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
+
+/* Slow Sane (16-bit chunk memory read/write) Cabletron uses this */
+static void slow_sane_get_8390_hdr(struct net_device *dev,
+				   struct e8390_pkt_hdr *hdr, int ring_page);
+static void slow_sane_block_input(struct net_device *dev, int count,
+				  struct sk_buff *skb, int ring_offset);
+static void slow_sane_block_output(struct net_device *dev, int count,
+				   const unsigned char *buf, int start_page);
+static void word_memcpy_tocard(void *tp, const void *fp, int count);
+static void word_memcpy_fromcard(void *tp, const void *fp, int count);
+
+enum mac8390_type __init mac8390_ident(struct nubus_dev * dev)
+{
+	if (dev->dr_sw == NUBUS_DRSW_ASANTE)
+		return MAC8390_ASANTE;
+	if (dev->dr_sw == NUBUS_DRSW_FARALLON) 
+		return MAC8390_FARALLON;
+	if (dev->dr_sw == NUBUS_DRSW_KINETICS)
+		return MAC8390_KINETICS;
+	if (dev->dr_sw == NUBUS_DRSW_DAYNA)
+		return MAC8390_DAYNA;
+	if (dev->dr_sw == NUBUS_DRSW_DAYNA2)
+		return MAC8390_DAYNA2;
+	if (dev->dr_sw == NUBUS_DRSW_DAYNA_LC)
+		return MAC8390_DAYNA3;
+	if (dev->dr_hw == NUBUS_DRHW_CABLETRON)
+		return MAC8390_CABLETRON;
+	return MAC8390_NONE;
+}
+
+int __init mac8390_memsize(unsigned long membase)
+{
+	unsigned long flags;
+	int i, j;
+	
+	save_flags(flags); cli();
+	/* Check up to 32K in 4K increments */
+	for (i = 0; i < 8; i++) {
+		volatile unsigned short *m = (unsigned short *) (membase + (i * 0x1000));
+
+		/* Unwriteable - we have a fully decoded card and the
+		   RAM end located */
+		if (hwreg_present(m) == 0)
+			break;
+		
+		/* write a distinctive byte */
+		*m = 0xA5A0 | i;
+		/* check that we read back what we wrote */
+		if (*m != (0xA5A0 | i))
+			break;
+
+		/* check for partial decode and wrap */
+		for (j = 0; j < i; j++) {
+			volatile unsigned short *p = (unsigned short *) (membase + (j * 0x1000));
+			if (*p != (0xA5A0 | j))
+				break;
+ 		}
+ 	}
+	restore_flags(flags);
+	/* in any case, we stopped once we tried one block too many,
+           or once we reached 32K */
+ 	return i * 0x1000;
+}
+
+static int probed __initdata = 0;
+
+int __init mac8390_probe(struct net_device * dev)
+{
+	volatile unsigned short *i;
+	int boards_found = 0;
+	int version_disp = 0;
+	struct nubus_dev * ndev = NULL;
+	
+	struct nubus_dir dir;
+	struct nubus_dirent ent;
+	int offset;
+
+	enum mac8390_type cardtype;
+
+	if (probed)
+		return -ENODEV;
+	probed++;
+
+	/* probably should check for Nubus instead */
+
+	if (!MACH_IS_MAC)
+		return -ENODEV;
+
+	while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK, NUBUS_TYPE_ETHERNET, ndev))) {
+		
+		dev = NULL;
+		
+		if ((cardtype = mac8390_ident(ndev)) == MAC8390_NONE)
+			continue;
+
+		dev = init_etherdev(dev, 0);
+		if (dev == NULL) {
+			printk(KERN_ERR "Unable to allocate etherdev"
+					"structure!\n");
+			return -ENOMEM;
+		}
+
+		if (version_disp == 0) {
+			version_disp = 1;
+			printk(version);
+		}
+
+		dev->irq = SLOT2IRQ(ndev->board->slot);
+		/* This is getting to be a habit */
+		dev->base_addr = ndev->board->slot_addr | ((ndev->board->slot&0xf) << 20);
+
+		/* Get some Nubus info - we will trust the card's idea
+		   of where its memory and registers are. */
+
+		if (nubus_get_func_dir(ndev, &dir) == -1) {
+			printk(KERN_ERR "%s: Unable to get Nubus functional"
+					" directory for slot %X!\n",
+			       dev->name, ndev->board->slot);
+			continue;
+		}
+		
+		/* Get the MAC address */
+		if ((nubus_find_rsrc(&dir, NUBUS_RESID_MAC_ADDRESS, &ent)) == -1) {
+			printk(KERN_INFO "%s: Couldn't get MAC address!\n",
+					dev->name);
+			continue;
+		} else {
+			nubus_get_rsrc_mem(dev->dev_addr, &ent, 6);
+			/* Some Sonic Sys cards masquerade as Farallon */
+			if (cardtype == MAC8390_FARALLON && 
+					dev->dev_addr[0] == 0x0 &&
+					dev->dev_addr[1] == 0x40 &&
+					dev->dev_addr[2] == 0x10) {
+				/* This is really Sonic Sys card */
+				cardtype = MAC8390_SONICSYS;
+			}
+		}
+		
+		if (useresources[cardtype] == 1) {
+			nubus_rewinddir(&dir);
+			if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_BASEOS, &ent) == -1) {
+				printk(KERN_ERR "%s: Memory offset resource"
+						" for slot %X not found!\n",
+				       dev->name, ndev->board->slot);
+				continue;
+			}
+			nubus_get_rsrc_mem(&offset, &ent, 4);
+			dev->mem_start = dev->base_addr + offset;
+			/* yes, this is how the Apple driver does it */
+			dev->base_addr = dev->mem_start + 0x10000;
+			nubus_rewinddir(&dir);
+			if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_LENGTH, &ent) == -1) {
+				printk(KERN_INFO "%s: Memory length resource"
+						 " for slot %X not found"
+						 ", probing\n",
+				       dev->name, ndev->board->slot);
+				offset = mac8390_memsize(dev->mem_start);
+				} else {
+					nubus_get_rsrc_mem(&offset, &ent, 4);
+				}
+			dev->mem_end = dev->mem_start + offset;
+		} else {
+			switch (cardtype) {
+				case MAC8390_KINETICS:
+				case MAC8390_DAYNA: /* it's the same */
+					dev->base_addr = 
+						(int)(ndev->board->slot_addr +
+						DAYNA_8390_BASE);
+					dev->mem_start = 
+						(int)(ndev->board->slot_addr +
+						DAYNA_8390_MEM);
+					dev->mem_end =
+						dev->mem_start +
+						mac8390_memsize(dev->mem_start);
+					break;
+				case MAC8390_CABLETRON:
+					dev->base_addr =
+						(int)(ndev->board->slot_addr +
+						CABLETRON_8390_BASE);
+					dev->mem_start =
+						(int)(ndev->board->slot_addr +
+						CABLETRON_8390_MEM);
+					/* The base address is unreadable if 0x00
+					 * has been written to the command register
+					 * Reset the chip by writing E8390_NODMA +
+					 *   E8390_PAGE0 + E8390_STOP just to be
+					 *   sure
+					 */
+					i = (void *)dev->base_addr;
+					*i = 0x21;
+					dev->mem_end = 
+						dev->mem_start +
+						mac8390_memsize(dev->mem_start);
+					break;
+					
+				default:
+					printk(KERN_ERR "Card type %s is"
+							" unsupported, sorry\n",
+					       cardname[cardtype]);
+					return -ENODEV;
+			}
+		}
+
+		/* Do the nasty 8390 stuff */
+		if (mac8390_initdev(dev, ndev, cardtype))
+			continue;
+		boards_found++;
+	}
+
+	/* We're outta here */
+	if (boards_found > 0)
+		return 0;
+	else
+		return -ENODEV;
+}
+
+#ifdef MODULE
+#if LINUX_VERSION_CODE > 0x20118
+MODULE_AUTHOR("David Huggins-Daines <dhd@debian.org> and others");
+MODULE_DESCRIPTION("Macintosh NS8390-based Nubus Ethernet driver");
+MODUEL_LICENSE("GPL");
+#endif
+
+int init_module(void)
+{
+	if (mac8390_probe(NULL)) {
+		printk(KERN_NOTICE "mac8390.c: No useable cards found, driver NOT installed.\n");
+		return -ENODEV;
+	}
+	lock_8390_module();
+	return 0;
+}
+
+void cleanup_module(void)
+{
+	/* FIXME: should probably keep track of net_device structs
+           somewhere and unregister them here? */
+	unlock_8390_module();
+}
+
+#endif /* MODULE */
+
+int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * ndev,
+			    enum mac8390_type type)
+{
+	static u32 fwrd4_offsets[16]={
+		0,      4,      8,      12,
+		16,     20,     24,     28,
+		32,     36,     40,     44,
+		48,     52,     56,     60
+	};
+	static u32 back4_offsets[16]={
+		60,     56,     52,     48,
+		44,     40,     36,     32,
+		28,     24,     20,     16,
+		12,     8,      4,      0
+	};
+	static u32 fwrd2_offsets[16]={
+		0,      2,      4,      6,
+		8,     10,     12,     14,
+		16,    18,     20,     22,
+		24,    26,     28,     30
+	};
+
+	int access_bitmode;
+	
+	/* 8390 specific init for dev - allocates dev->priv */
+	if (ethdev_init(dev)) {
+		printk(KERN_ERR "%s: Unable to allocate memory for dev->priv!\n", dev->name);
+		return -ENOMEM;
+	}
+
+	/* Now fill in our stuff */
+	dev->open = &mac8390_open;
+	dev->stop = &mac8390_close;
+
+	/* GAR, ei_status is actually a macro even though it looks global */
+	ei_status.name = cardname[type];
+	ei_status.word16 = word16[type];
+
+	/* Cabletron's TX/RX buffers are backwards */
+	if (type == MAC8390_CABLETRON) {
+               ei_status.tx_start_page = CABLETRON_TX_START_PG;
+               ei_status.rx_start_page = CABLETRON_RX_START_PG;
+               ei_status.stop_page = CABLETRON_RX_STOP_PG;
+               dev->rmem_start = dev->mem_start;
+               dev->rmem_end = dev->mem_start + CABLETRON_RX_STOP_PG*256;
+	} else {
+               ei_status.tx_start_page = WD_START_PG;
+               ei_status.rx_start_page = WD_START_PG + TX_PAGES;
+               ei_status.stop_page = (dev->mem_end - dev->mem_start)/256;
+               dev->rmem_start = dev->mem_start + TX_PAGES*256;
+               dev->rmem_end = dev->mem_end;
+	}
+	
+	/* Fill in model-specific information and functions */
+	switch(type) {
+	case MAC8390_SONICSYS:
+		/* 16 bit card, register map is reversed */
+		ei_status.reset_8390 = &mac8390_no_reset;
+		ei_status.block_input = &slow_sane_block_input;
+		ei_status.block_output = &slow_sane_block_output;
+		ei_status.get_8390_hdr = &slow_sane_get_8390_hdr;
+		ei_status.reg_offset = back4_offsets;
+		access_bitmode = 0;
+		break;
+	case MAC8390_FARALLON:
+	case MAC8390_APPLE:
+	case MAC8390_ASANTE:
+	case MAC8390_DAYNA2:
+	case MAC8390_DAYNA3:
+		/* 32 bit card, register map is reversed */
+		/* sane */
+		ei_status.reset_8390 = &mac8390_no_reset;
+		ei_status.block_input = &sane_block_input;
+		ei_status.block_output = &sane_block_output;
+		ei_status.get_8390_hdr = &sane_get_8390_hdr;
+		ei_status.reg_offset = back4_offsets;
+		access_bitmode = 1;
+		break;
+	case MAC8390_CABLETRON:
+		/* 16 bit card, register map is short forward */
+		ei_status.reset_8390 = &mac8390_no_reset;
+		ei_status.block_input = &slow_sane_block_input;
+		ei_status.block_output = &slow_sane_block_output;
+		ei_status.get_8390_hdr = &slow_sane_get_8390_hdr;
+		ei_status.reg_offset = fwrd2_offsets;
+		access_bitmode = 0;
+		break;
+	case MAC8390_DAYNA:
+	case MAC8390_KINETICS:
+		/* 16 bit memory */
+		/* dayna and similar */
+		ei_status.reset_8390 = &mac8390_no_reset;
+		ei_status.block_input = &dayna_block_input;
+		ei_status.block_output = &dayna_block_output;
+		ei_status.get_8390_hdr = &dayna_get_8390_hdr;
+		ei_status.reg_offset = fwrd4_offsets;
+		access_bitmode = 0;
+		break;
+	default:
+		printk(KERN_ERR "Card type %s is unsupported, sorry\n", cardname[type]);
+		return -ENODEV;
+	}
+		
+	NS8390_init(dev, 0);
+
+	/* Good, done, now spit out some messages */
+	printk(KERN_INFO "%s: %s in slot %X (type %s)\n",
+		   dev->name, ndev->board->name, ndev->board->slot, cardname[type]);
+	printk(KERN_INFO "MAC ");
+	{
+		int i;
+		for (i = 0; i < 6; i++) {
+			printk("%2.2x", dev->dev_addr[i]);
+			if (i < 5)
+				printk(":");
+		}
+	}
+	printk(" IRQ %d, shared memory at %#lx-%#lx,  %d-bit access.\n",
+		   dev->irq, dev->mem_start, dev->mem_end-1, 
+		   access_bitmode?32:16);
+	return 0;
+}
+
+static int mac8390_open(struct net_device *dev)
+{
+	ei_open(dev);
+	if (request_irq(dev->irq, ei_interrupt, 0, "8390 Ethernet", dev)) {
+		printk ("%s: unable to get IRQ %d.\n", dev->name, dev->irq);
+		return -EAGAIN;
+	}	
+	MOD_INC_USE_COUNT;
+	return 0;
+}
+
+static int mac8390_close(struct net_device *dev)
+{
+	free_irq(dev->irq, dev);
+	ei_close(dev);
+	MOD_DEC_USE_COUNT;
+	return 0;
+}
+
+static void mac8390_no_reset(struct net_device *dev)
+{
+	ei_status.txing = 0;
+	if (ei_debug > 1)
+		printk("reset not supported\n");
+	return;
+}
+
+/* dayna_memcpy_fromio/dayna_memcpy_toio */
+/* directly from daynaport.c by Alan Cox */
+static void dayna_memcpy_fromcard(struct net_device *dev, void *to, int from, int count)
+{
+	volatile unsigned short *ptr;
+	unsigned short *target=to;
+	from<<=1;	/* word, skip overhead */
+	ptr=(unsigned short *)(dev->mem_start+from);
+	/* Leading byte? */
+	if (from&2) {
+		*((char *)target)++ = *(((char *)ptr++)-1);
+		count--;
+	}
+	while(count>=2)
+	{
+		*target++=*ptr++;	/* Copy and */
+		ptr++;			/* skip cruft */
+		count-=2;
+	}
+	/* Trailing byte? */
+	if(count)
+	{
+		/* Big endian */
+		unsigned short v=*ptr;
+		*((char *)target)=v>>8;
+	}
+}
+
+static void dayna_memcpy_tocard(struct net_device *dev, int to, const void *from, int count)
+{
+	volatile unsigned short *ptr;
+	const unsigned short *src=from;
+	to<<=1;	/* word, skip overhead */
+	ptr=(unsigned short *)(dev->mem_start+to);
+	/* Leading byte? */
+	if (to&2) { /* avoid a byte write (stomps on other data) */
+		ptr[-1] = (ptr[-1]&0xFF00)|*((unsigned char *)src)++;
+		ptr++;
+		count--;
+	}
+	while(count>=2)
+	{
+		*ptr++=*src++;		/* Copy and */
+		ptr++;			/* skip cruft */
+		count-=2;
+	}
+	/* Trailing byte? */
+	if(count)
+	{
+		/* Big endian */
+		unsigned short v=*src;
+		/* card doesn't like byte writes */
+		*ptr=(*ptr&0x00FF)|(v&0xFF00);
+	}
+}
+
+/* sane block input/output */
+static void sane_get_8390_hdr(struct net_device *dev,
+			      struct e8390_pkt_hdr *hdr, int ring_page)
+{
+	unsigned long hdr_start = (ring_page - WD_START_PG)<<8;
+	memcpy_fromio((void *)hdr, (char *)dev->mem_start + hdr_start, 4);
+	/* Fix endianness */
+	hdr->count = swab16(hdr->count);
+}
+
+static void sane_block_input(struct net_device *dev, int count,
+			     struct sk_buff *skb, int ring_offset)
+{
+	unsigned long xfer_base = ring_offset - (WD_START_PG<<8);
+	unsigned long xfer_start = xfer_base + dev->mem_start;
+
+	if (xfer_start + count > dev->rmem_end) {
+		/* We must wrap the input move. */
+		int semi_count = dev->rmem_end - xfer_start;
+		memcpy_fromio(skb->data, (char *)dev->mem_start + xfer_base, semi_count);
+		count -= semi_count;
+		memcpy_toio(skb->data + semi_count, (char *)dev->rmem_start, count);
+	} else {
+		memcpy_fromio(skb->data, (char *)dev->mem_start + xfer_base, count);
+	}
+}
+
+static void sane_block_output(struct net_device *dev, int count,
+			      const unsigned char *buf, int start_page)
+{
+	long shmem = (start_page - WD_START_PG)<<8;
+	
+	memcpy_toio((char *)dev->mem_start + shmem, buf, count);
+}
+
+/* dayna block input/output */
+static void dayna_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
+{
+	unsigned long hdr_start = (ring_page - WD_START_PG)<<8;
+
+	dayna_memcpy_fromcard(dev, (void *)hdr, hdr_start, 4);
+	/* Fix endianness */
+	hdr->count=(hdr->count&0xFF)<<8|(hdr->count>>8);
+}
+
+static void dayna_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
+{
+	unsigned long xfer_base = ring_offset - (WD_START_PG<<8);
+	unsigned long xfer_start = xfer_base+dev->mem_start;
+
+	/* Note the offset math is done in card memory space which is word
+	   per long onto our space. */
+	 
+	if (xfer_start + count > dev->rmem_end) 
+	{
+		/* We must wrap the input move. */
+		int semi_count = dev->rmem_end - xfer_start;
+		dayna_memcpy_fromcard(dev, skb->data, xfer_base, semi_count);
+		count -= semi_count;
+		dayna_memcpy_fromcard(dev, skb->data + semi_count, 
+			dev->rmem_start - dev->mem_start, count);
+	}
+	else
+	{
+		dayna_memcpy_fromcard(dev, skb->data, xfer_base, count);
+	}
+}
+
+static void dayna_block_output(struct net_device *dev, int count, const unsigned char *buf,
+				int start_page)
+{
+	long shmem = (start_page - WD_START_PG)<<8;
+	
+	dayna_memcpy_tocard(dev, shmem, buf, count);
+}
+
+/* Cabletron block I/O */
+static void slow_sane_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, 
+	int ring_page)
+{
+	unsigned long hdr_start = (ring_page - WD_START_PG)<<8;
+	word_memcpy_fromcard((void *)hdr, (char *)dev->mem_start+hdr_start, 4);
+	/* Register endianism - fix here rather than 8390.c */
+	hdr->count = (hdr->count&0xFF)<<8|(hdr->count>>8);
+}
+
+static void slow_sane_block_input(struct net_device *dev, int count, struct sk_buff *skb,
+	int ring_offset)
+{
+	unsigned long xfer_base = ring_offset - (WD_START_PG<<8);
+	unsigned long xfer_start = xfer_base+dev->mem_start;
+
+	if (xfer_start + count > dev->rmem_end)
+	{
+		/* We must wrap the input move. */
+		int semi_count = dev->rmem_end - xfer_start;
+		word_memcpy_fromcard(skb->data, (char *)dev->mem_start +
+			xfer_base, semi_count);
+		count -= semi_count;
+		word_memcpy_fromcard(skb->data + semi_count,
+			(char *)dev->rmem_start, count);
+	}
+	else
+	{
+		word_memcpy_fromcard(skb->data, (char *)dev->mem_start +
+			xfer_base, count);
+	}
+}
+
+static void slow_sane_block_output(struct net_device *dev, int count, const unsigned char *buf,
+	int start_page)
+{
+	long shmem = (start_page - WD_START_PG)<<8;
+
+	word_memcpy_tocard((char *)dev->mem_start + shmem, buf, count);
+}
+
+static void word_memcpy_tocard(void *tp, const void *fp, int count)
+{
+	volatile unsigned short *to = tp;
+	const unsigned short *from = fp;
+
+	count++;
+	count/=2;
+
+	while(count--)
+		*to++=*from++;
+}
+
+static void word_memcpy_fromcard(void *tp, const void *fp, int count)
+{
+	unsigned short *to = tp;
+	const volatile unsigned short *from = fp;
+
+	count++;
+	count/=2;
+
+	while(count--)
+		*to++=*from++;
+}
+
+	

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)