patch-2.4.21 linux-2.4.21/drivers/ide/ide-features.c

Next file: linux-2.4.21/drivers/ide/ide-floppy.c
Previous file: linux-2.4.21/drivers/ide/ide-dma.c
Back to the patch index
Back to the overall index

diff -urN linux-2.4.20/drivers/ide/ide-features.c linux-2.4.21/drivers/ide/ide-features.c
@@ -1,385 +0,0 @@
-/*
- * linux/drivers/block/ide-features.c	Version 0.04	June 9, 2000
- *
- *  Copyright (C) 1999-2000	Linus Torvalds & authors (see below)
- *  
- *  Copyright (C) 1999-2000	Andre Hedrick <andre@linux-ide.org>
- *
- *  Extracts if ide.c to address the evolving transfer rate code for
- *  the SETFEATURES_XFER callouts.  Various parts of any given function
- *  are credited to previous ATA-IDE maintainers.
- *
- *  Auto-CRC downgrade for Ultra DMA(ing)
- *
- *  May be copied or modified under the terms of the GNU General Public License
- */
-
-#include <linux/config.h>
-#define __NO_VERSION__
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/major.h>
-#include <linux/errno.h>
-#include <linux/genhd.h>
-#include <linux/blkpg.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/hdreg.h>
-#include <linux/ide.h>
-
-#include <asm/byteorder.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/bitops.h>
-
-/*
- * A Verbose noise maker for debugging on the attempted transfer rates.
- */
-char *ide_xfer_verbose (byte xfer_rate)
-{
-	switch(xfer_rate) {
-		case XFER_UDMA_7:	return("UDMA 7");
-		case XFER_UDMA_6:	return("UDMA 6");
-		case XFER_UDMA_5:	return("UDMA 5");
-		case XFER_UDMA_4:	return("UDMA 4");
-		case XFER_UDMA_3:	return("UDMA 3");
-		case XFER_UDMA_2:	return("UDMA 2");
-		case XFER_UDMA_1:	return("UDMA 1");
-		case XFER_UDMA_0:	return("UDMA 0");
-		case XFER_MW_DMA_2:	return("MW DMA 2");
-		case XFER_MW_DMA_1:	return("MW DMA 1");
-		case XFER_MW_DMA_0:	return("MW DMA 0");
-		case XFER_SW_DMA_2:	return("SW DMA 2");
-		case XFER_SW_DMA_1:	return("SW DMA 1");
-		case XFER_SW_DMA_0:	return("SW DMA 0");
-		case XFER_PIO_4:	return("PIO 4");
-		case XFER_PIO_3:	return("PIO 3");
-		case XFER_PIO_2:	return("PIO 2");
-		case XFER_PIO_1:	return("PIO 1");
-		case XFER_PIO_0:	return("PIO 0");
-		case XFER_PIO_SLOW:	return("PIO SLOW");
-		default:		return("XFER ERROR");
-	}
-}
-
-/*
- *
- */
-char *ide_media_verbose (ide_drive_t *drive)
-{
-	switch (drive->media) {
-		case ide_scsi:		return("scsi   ");
-		case ide_disk:		return("disk   ");
-		case ide_optical:	return("optical");
-		case ide_cdrom:		return("cdrom  ");
-		case ide_tape:		return("tape   ");
-		case ide_floppy:	return("floppy ");
-		default:		return("???????");
-	}
-}
-
-/*
- * A Verbose noise maker for debugging on the attempted dmaing calls.
- */
-char *ide_dmafunc_verbose (ide_dma_action_t dmafunc)
-{
-	switch (dmafunc) {
-		case ide_dma_read:		return("ide_dma_read");
-		case ide_dma_write:		return("ide_dma_write");
-		case ide_dma_begin:		return("ide_dma_begin");
-		case ide_dma_end:		return("ide_dma_end:");
-		case ide_dma_check:		return("ide_dma_check");
-		case ide_dma_on:		return("ide_dma_on");
-		case ide_dma_off:		return("ide_dma_off");
-		case ide_dma_off_quietly:	return("ide_dma_off_quietly");
-		case ide_dma_test_irq:		return("ide_dma_test_irq");
-		case ide_dma_bad_drive:		return("ide_dma_bad_drive");
-		case ide_dma_good_drive:	return("ide_dma_good_drive");
-		case ide_dma_verbose:		return("ide_dma_verbose");
-		case ide_dma_retune:		return("ide_dma_retune");
-		case ide_dma_lostirq:		return("ide_dma_lostirq");
-		case ide_dma_timeout:		return("ide_dma_timeout");
-		default:			return("unknown");
-	}
-}
-
-/*
- *
- */
-byte ide_auto_reduce_xfer (ide_drive_t *drive)
-{
-	if (!drive->crc_count)
-		return drive->current_speed;
-	drive->crc_count = 0;
-
-	switch(drive->current_speed) {
-		case XFER_UDMA_7:	return XFER_UDMA_6;
-		case XFER_UDMA_6:	return XFER_UDMA_5;
-		case XFER_UDMA_5:	return XFER_UDMA_4;
-		case XFER_UDMA_4:	return XFER_UDMA_3;
-		case XFER_UDMA_3:	return XFER_UDMA_2;
-		case XFER_UDMA_2:	return XFER_UDMA_1;
-		case XFER_UDMA_1:	return XFER_UDMA_0;
-			/*
-			 * OOPS we do not goto non Ultra DMA modes
-			 * without iCRC's available we force
-			 * the system to PIO and make the user
-			 * invoke the ATA-1 ATA-2 DMA modes.
-			 */
-		case XFER_UDMA_0:
-		default:		return XFER_PIO_4;
-	}
-}
-
-/*
- * Update the 
- */
-int ide_driveid_update (ide_drive_t *drive)
-{
-	/*
-	 * Re-read drive->id for possible DMA mode
-	 * change (copied from ide-probe.c)
-	 */
-	struct hd_driveid *id;
-	unsigned long timeout, flags;
-
-	SELECT_MASK(HWIF(drive), drive, 1);
-	if (IDE_CONTROL_REG)
-		OUT_BYTE(drive->ctl,IDE_CONTROL_REG);
-	ide_delay_50ms();
-	OUT_BYTE(WIN_IDENTIFY, IDE_COMMAND_REG);
-	timeout = jiffies + WAIT_WORSTCASE;
-	do {
-		if (0 < (signed long)(jiffies - timeout)) {
-			SELECT_MASK(HWIF(drive), drive, 0);
-			return 0;	/* drive timed-out */
-		}
-		ide_delay_50ms();	/* give drive a breather */
-	} while (IN_BYTE(IDE_ALTSTATUS_REG) & BUSY_STAT);
-	ide_delay_50ms();	/* wait for IRQ and DRQ_STAT */
-	if (!OK_STAT(GET_STAT(),DRQ_STAT,BAD_R_STAT)) {
-		SELECT_MASK(HWIF(drive), drive, 0);
-		printk("%s: CHECK for good STATUS\n", drive->name);
-		return 0;
-	}
-	__save_flags(flags);	/* local CPU only */
-	__cli();		/* local CPU only; some systems need this */
-	SELECT_MASK(HWIF(drive), drive, 0);
-	id = kmalloc(SECTOR_WORDS*4, GFP_ATOMIC);
-	if (!id) {
-		__restore_flags(flags);	/* local CPU only */
-		return 0;
-	}
-	ide_input_data(drive, id, SECTOR_WORDS);
-	(void) GET_STAT();	/* clear drive IRQ */
-	ide__sti();		/* local CPU only */
-	__restore_flags(flags);	/* local CPU only */
-	ide_fix_driveid(id);
-	if (id) {
-		drive->id->dma_ultra = id->dma_ultra;
-		drive->id->dma_mword = id->dma_mword;
-		drive->id->dma_1word = id->dma_1word;
-		/* anything more ? */
-		kfree(id);
-	}
-
-	return 1;
-}
-
-/*
- * Verify that we are doing an approved SETFEATURES_XFER with respect
- * to the hardware being able to support request.  Since some hardware
- * can improperly report capabilties, we check to see if the host adapter
- * in combination with the device (usually a disk) properly detect
- * and acknowledge each end of the ribbon.
- */
-int ide_ata66_check (ide_drive_t *drive, ide_task_t *args)
-{
-	if ((args->tfRegister[IDE_COMMAND_OFFSET] == WIN_SETFEATURES) &&
-	    (args->tfRegister[IDE_SECTOR_OFFSET] > XFER_UDMA_2) &&
-	    (args->tfRegister[IDE_FEATURE_OFFSET] == SETFEATURES_XFER)) {
-		if (!HWIF(drive)->udma_four) {
-			printk("%s: Speed warnings UDMA 3/4/5 is not functional.\n", HWIF(drive)->name);
-			return 1;
-		}
-#ifndef CONFIG_IDEDMA_IVB
-		if ((drive->id->hw_config & 0x6000) == 0) {
-#else /* !CONFIG_IDEDMA_IVB */
-		if (((drive->id->hw_config & 0x2000) == 0) ||
-		    ((drive->id->hw_config & 0x4000) == 0)) {
-#endif /* CONFIG_IDEDMA_IVB */
-			printk("%s: Speed warnings UDMA 3/4/5 is not functional.\n", drive->name);
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/*
- * Backside of HDIO_DRIVE_CMD call of SETFEATURES_XFER.
- * 1 : Safe to update drive->id DMA registers.
- * 0 : OOPs not allowed.
- */
-int set_transfer (ide_drive_t *drive, ide_task_t *args)
-{
-	if ((args->tfRegister[IDE_COMMAND_OFFSET] == WIN_SETFEATURES) &&
-	    (args->tfRegister[IDE_SECTOR_OFFSET] >= XFER_SW_DMA_0) &&
-	    (args->tfRegister[IDE_FEATURE_OFFSET] == SETFEATURES_XFER) &&
-	    (drive->id->dma_ultra ||
-	     drive->id->dma_mword ||
-	     drive->id->dma_1word))
-		return 1;
-
-	return 0;
-}
-
-#ifdef CONFIG_BLK_DEV_IDEDMA
-/*
- *  All hosts that use the 80c ribbon mus use!
- */
-byte eighty_ninty_three (ide_drive_t *drive)
-{
-#ifdef CONFIG_BLK_DEV_IDEPCI
-	if (HWIF(drive)->pci_devid.vid==0x105a)
-	    return(HWIF(drive)->udma_four);
-#endif
-	/* PDC202XX: that's because some HDD will return wrong info */
-	return ((byte) ((HWIF(drive)->udma_four) &&
-#ifndef CONFIG_IDEDMA_IVB
-			(drive->id->hw_config & 0x4000) &&
-#endif /* CONFIG_IDEDMA_IVB */
-			(drive->id->hw_config & 0x6000)) ? 1 : 0);
-}
-#endif // CONFIG_BLK_DEV_IDEDMA
-
-/*
- * Similar to ide_wait_stat(), except it never calls ide_error internally.
- * This is a kludge to handle the new ide_config_drive_speed() function,
- * and should not otherwise be used anywhere.  Eventually, the tuneproc's
- * should be updated to return ide_startstop_t, in which case we can get
- * rid of this abomination again.  :)   -ml
- *
- * It is gone..........
- *
- * const char *msg == consider adding for verbose errors.
- */
-int ide_config_drive_speed (ide_drive_t *drive, byte speed)
-{
-	ide_hwif_t *hwif = HWIF(drive);
-	int	i, error = 1;
-	byte stat;
-
-#if defined(CONFIG_BLK_DEV_IDEDMA) && !defined(CONFIG_DMA_NONPCI)
-	byte unit = (drive->select.b.unit & 0x01);
-	outb(inb(hwif->dma_base+2) & ~(1<<(5+unit)), hwif->dma_base+2);
-#endif /* (CONFIG_BLK_DEV_IDEDMA) && !(CONFIG_DMA_NONPCI) */
-
-	/*
-	 * Don't use ide_wait_cmd here - it will
-	 * attempt to set_geometry and recalibrate,
-	 * but for some reason these don't work at
-	 * this point (lost interrupt).
-	 */
-        /*
-         * Select the drive, and issue the SETFEATURES command
-         */
-	disable_irq(hwif->irq);	/* disable_irq_nosync ?? */
-	udelay(1);
-	SELECT_DRIVE(HWIF(drive), drive);
-	SELECT_MASK(HWIF(drive), drive, 0);
-	udelay(1);
-	if (IDE_CONTROL_REG)
-		OUT_BYTE(drive->ctl | 2, IDE_CONTROL_REG);
-	OUT_BYTE(speed, IDE_NSECTOR_REG);
-	OUT_BYTE(SETFEATURES_XFER, IDE_FEATURE_REG);
-	OUT_BYTE(WIN_SETFEATURES, IDE_COMMAND_REG);
-	if ((IDE_CONTROL_REG) && (drive->quirk_list == 2))
-		OUT_BYTE(drive->ctl, IDE_CONTROL_REG);
-	udelay(1);
-	/*
-	 * Wait for drive to become non-BUSY
-	 */
-	if ((stat = GET_STAT()) & BUSY_STAT) {
-		unsigned long flags, timeout;
-		__save_flags(flags);	/* local CPU only */
-		ide__sti();		/* local CPU only -- for jiffies */
-		timeout = jiffies + WAIT_CMD;
-		while ((stat = GET_STAT()) & BUSY_STAT) {
-			if (0 < (signed long)(jiffies - timeout))
-				break;
-		}
-		__restore_flags(flags); /* local CPU only */
-	}
-
-	/*
-	 * Allow status to settle, then read it again.
-	 * A few rare drives vastly violate the 400ns spec here,
-	 * so we'll wait up to 10usec for a "good" status
-	 * rather than expensively fail things immediately.
-	 * This fix courtesy of Matthew Faupel & Niccolo Rigacci.
-	 */
-	for (i = 0; i < 10; i++) {
-		udelay(1);
-		if (OK_STAT((stat = GET_STAT()), DRIVE_READY, BUSY_STAT|DRQ_STAT|ERR_STAT)) {
-			error = 0;
-			break;
-		}
-	}
-
-	SELECT_MASK(HWIF(drive), drive, 0);
-
-	enable_irq(hwif->irq);
-
-	if (error) {
-		(void) ide_dump_status(drive, "set_drive_speed_status", stat);
-		return error;
-	}
-
-	drive->id->dma_ultra &= ~0xFF00;
-	drive->id->dma_mword &= ~0x0F00;
-	drive->id->dma_1word &= ~0x0F00;
-
-#if defined(CONFIG_BLK_DEV_IDEDMA) && !defined(CONFIG_DMA_NONPCI)
-	if (speed > XFER_PIO_4) {
-		outb(inb(hwif->dma_base+2)|(1<<(5+unit)), hwif->dma_base+2);
-	} else {
-		outb(inb(hwif->dma_base+2) & ~(1<<(5+unit)), hwif->dma_base+2);
-	}
-#endif /* (CONFIG_BLK_DEV_IDEDMA) && !(CONFIG_DMA_NONPCI) */
-
-	switch(speed) {
-		case XFER_UDMA_7:   drive->id->dma_ultra |= 0x8080; break;
-		case XFER_UDMA_6:   drive->id->dma_ultra |= 0x4040; break;
-		case XFER_UDMA_5:   drive->id->dma_ultra |= 0x2020; break;
-		case XFER_UDMA_4:   drive->id->dma_ultra |= 0x1010; break;
-		case XFER_UDMA_3:   drive->id->dma_ultra |= 0x0808; break;
-		case XFER_UDMA_2:   drive->id->dma_ultra |= 0x0404; break;
-		case XFER_UDMA_1:   drive->id->dma_ultra |= 0x0202; break;
-		case XFER_UDMA_0:   drive->id->dma_ultra |= 0x0101; break;
-		case XFER_MW_DMA_2: drive->id->dma_mword |= 0x0404; break;
-		case XFER_MW_DMA_1: drive->id->dma_mword |= 0x0202; break;
-		case XFER_MW_DMA_0: drive->id->dma_mword |= 0x0101; break;
-		case XFER_SW_DMA_2: drive->id->dma_1word |= 0x0404; break;
-		case XFER_SW_DMA_1: drive->id->dma_1word |= 0x0202; break;
-		case XFER_SW_DMA_0: drive->id->dma_1word |= 0x0101; break;
-		default: break;
-	}
-	return error;
-}
-
-EXPORT_SYMBOL(ide_auto_reduce_xfer);
-EXPORT_SYMBOL(ide_driveid_update);
-EXPORT_SYMBOL(ide_ata66_check);
-EXPORT_SYMBOL(set_transfer);
-#ifdef CONFIG_BLK_DEV_IDEDMA
-EXPORT_SYMBOL(eighty_ninty_three);
-#endif // CONFIG_BLK_DEV_IDEDMA
-EXPORT_SYMBOL(ide_config_drive_speed);
-

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)