patch-2.4.21 linux-2.4.21/drivers/ide/cmd64x.c
Next file: linux-2.4.21/drivers/ide/cs5530.c
Previous file: linux-2.4.21/drivers/ide/cmd640.c
Back to the patch index
Back to the overall index
- Lines: 1164
- Date:
1969-12-31 16:00:00.000000000 -0800
- Orig file:
linux-2.4.20/drivers/ide/cmd64x.c
- Orig date:
2002-08-02 17:39:44.000000000 -0700
diff -urN linux-2.4.20/drivers/ide/cmd64x.c linux-2.4.21/drivers/ide/cmd64x.c
@@ -1,1163 +0,0 @@
-/* $Id: cmd64x.c,v 1.21 2000/01/30 23:23:16
- *
- * linux/drivers/ide/cmd64x.c Version 1.22 June 9, 2000
- *
- * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
- * Note, this driver is not used at all on other systems because
- * there the "BIOS" has done all of the following already.
- * Due to massive hardware bugs, UltraDMA is only supported
- * on the 646U2 and not on the 646U.
- *
- * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
- * Copyright (C) 1998 David S. Miller (davem@redhat.com)
- * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
- */
-
-#include <linux/config.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/hdreg.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#include "ide_modes.h"
-
-#ifndef SPLIT_BYTE
-#define SPLIT_BYTE(B,H,L) ((H)=(B>>4), (L)=(B-((B>>4)<<4)))
-#endif
-
-#define CMD_DEBUG 0
-
-#if CMD_DEBUG
-#define cmdprintk(x...) printk(##x)
-#else
-#define cmdprintk(x...)
-#endif
-
-/*
- * CMD64x specific registers definition.
- */
-
-#define CFR 0x50
-#define CFR_INTR_CH0 0x02
-#define CNTRL 0x51
-#define CNTRL_DIS_RA0 0x40
-#define CNTRL_DIS_RA1 0x80
-#define CNTRL_ENA_2ND 0x08
-
-#define CMDTIM 0x52
-#define ARTTIM0 0x53
-#define DRWTIM0 0x54
-#define ARTTIM1 0x55
-#define DRWTIM1 0x56
-#define ARTTIM23 0x57
-#define ARTTIM23_DIS_RA2 0x04
-#define ARTTIM23_DIS_RA3 0x08
-#define ARTTIM23_INTR_CH1 0x10
-#define ARTTIM2 0x57
-#define ARTTIM3 0x57
-#define DRWTIM23 0x58
-#define DRWTIM2 0x58
-#define BRST 0x59
-#define DRWTIM3 0x5b
-
-#define BMIDECR0 0x70
-#define MRDMODE 0x71
-#define MRDMODE_INTR_CH0 0x04
-#define MRDMODE_INTR_CH1 0x08
-#define MRDMODE_BLK_CH0 0x10
-#define MRDMODE_BLK_CH1 0x20
-#define BMIDESR0 0x72
-#define UDIDETCR0 0x73
-#define DTPR0 0x74
-#define BMIDECR1 0x78
-#define BMIDECSR 0x79
-#define BMIDESR1 0x7A
-#define UDIDETCR1 0x7B
-#define DTPR1 0x7C
-
-#define DISPLAY_CMD64X_TIMINGS
-
-#if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_PROC_FS)
-#include <linux/stat.h>
-#include <linux/proc_fs.h>
-
-static int cmd64x_get_info(char *, char **, off_t, int);
-static int cmd680_get_info(char *, char **, off_t, int);
-extern int (*cmd64x_display_info)(char *, char **, off_t, int); /* ide-proc.c */
-extern char *ide_media_verbose(ide_drive_t *);
-static struct pci_dev *bmide_dev;
-
-static int cmd64x_get_info (char *buffer, char **addr, off_t offset, int count)
-{
- char *p = buffer;
- u8 reg53 = 0, reg54 = 0, reg55 = 0, reg56 = 0; /* primary */
- u8 reg57 = 0, reg58 = 0, reg5b; /* secondary */
- u8 reg72 = 0, reg73 = 0; /* primary */
- u8 reg7a = 0, reg7b = 0; /* secondary */
- u8 reg50 = 0, reg71 = 0; /* extra */
- u8 hi_byte = 0, lo_byte = 0;
-
- switch(bmide_dev->device) {
- case PCI_DEVICE_ID_CMD_649:
- p += sprintf(p, "\n CMD649 Chipset.\n");
- break;
- case PCI_DEVICE_ID_CMD_648:
- p += sprintf(p, "\n CMD648 Chipset.\n");
- break;
- case PCI_DEVICE_ID_CMD_646:
- p += sprintf(p, "\n CMD646 Chipset.\n");
- break;
- case PCI_DEVICE_ID_CMD_643:
- p += sprintf(p, "\n CMD643 Chipset.\n");
- break;
- default:
- p += sprintf(p, "\n CMD64? Chipse.\n");
- break;
- }
- (void) pci_read_config_byte(bmide_dev, CFR, ®50);
- (void) pci_read_config_byte(bmide_dev, ARTTIM0, ®53);
- (void) pci_read_config_byte(bmide_dev, DRWTIM0, ®54);
- (void) pci_read_config_byte(bmide_dev, ARTTIM1, ®55);
- (void) pci_read_config_byte(bmide_dev, DRWTIM1, ®56);
- (void) pci_read_config_byte(bmide_dev, ARTTIM2, ®57);
- (void) pci_read_config_byte(bmide_dev, DRWTIM2, ®58);
- (void) pci_read_config_byte(bmide_dev, DRWTIM3, ®5b);
- (void) pci_read_config_byte(bmide_dev, MRDMODE, ®71);
- (void) pci_read_config_byte(bmide_dev, BMIDESR0, ®72);
- (void) pci_read_config_byte(bmide_dev, UDIDETCR0, ®73);
- (void) pci_read_config_byte(bmide_dev, BMIDESR1, ®7a);
- (void) pci_read_config_byte(bmide_dev, UDIDETCR1, ®7b);
-
- p += sprintf(p, "--------------- Primary Channel ---------------- Secondary Channel -------------\n");
- p += sprintf(p, " %sabled %sabled\n",
- (reg72&0x80)?"dis":" en",(reg7a&0x80)?"dis":" en");
- p += sprintf(p, "--------------- drive0 --------- drive1 -------- drive0 ---------- drive1 ------\n");
- p += sprintf(p, "DMA enabled: %s %s %s %s\n",
- (reg72&0x20)?"yes":"no ",(reg72&0x40)?"yes":"no ",(reg7a&0x20)?"yes":"no ",(reg7a&0x40)?"yes":"no ");
- p += sprintf(p, "DMA Mode: %s(%s) %s(%s) %s(%s) %s(%s)\n",
- (reg72&0x20)?((reg73&0x01)?"UDMA":" DMA"):" PIO",
- (reg72&0x20)?( ((reg73&0x30)==0x30)?(((reg73&0x35)==0x35)?"3":"0"):
- ((reg73&0x20)==0x20)?(((reg73&0x25)==0x25)?"3":"1"):
- ((reg73&0x10)==0x10)?(((reg73&0x15)==0x15)?"4":"2"):
- ((reg73&0x00)==0x00)?(((reg73&0x05)==0x05)?"5":"2"):"X"):"?",
- (reg72&0x40)?((reg73&0x02)?"UDMA":" DMA"):" PIO",
- (reg72&0x40)?( ((reg73&0xC0)==0xC0)?(((reg73&0xC5)==0xC5)?"3":"0"):
- ((reg73&0x80)==0x80)?(((reg73&0x85)==0x85)?"3":"1"):
- ((reg73&0x40)==0x40)?(((reg73&0x4A)==0x4A)?"4":"2"):
- ((reg73&0x00)==0x00)?(((reg73&0x0A)==0x0A)?"5":"2"):"X"):"?",
- (reg7a&0x20)?((reg7b&0x01)?"UDMA":" DMA"):" PIO",
- (reg7a&0x20)?( ((reg7b&0x30)==0x30)?(((reg7b&0x35)==0x35)?"3":"0"):
- ((reg7b&0x20)==0x20)?(((reg7b&0x25)==0x25)?"3":"1"):
- ((reg7b&0x10)==0x10)?(((reg7b&0x15)==0x15)?"4":"2"):
- ((reg7b&0x00)==0x00)?(((reg7b&0x05)==0x05)?"5":"2"):"X"):"?",
- (reg7a&0x40)?((reg7b&0x02)?"UDMA":" DMA"):" PIO",
- (reg7a&0x40)?( ((reg7b&0xC0)==0xC0)?(((reg7b&0xC5)==0xC5)?"3":"0"):
- ((reg7b&0x80)==0x80)?(((reg7b&0x85)==0x85)?"3":"1"):
- ((reg7b&0x40)==0x40)?(((reg7b&0x4A)==0x4A)?"4":"2"):
- ((reg7b&0x00)==0x00)?(((reg7b&0x0A)==0x0A)?"5":"2"):"X"):"?" );
- p += sprintf(p, "PIO Mode: %s %s %s %s\n",
- "?", "?", "?", "?");
- p += sprintf(p, " %s %s\n",
- (reg50 & CFR_INTR_CH0) ? "interrupting" : "polling ",
- (reg57 & ARTTIM23_INTR_CH1) ? "interrupting" : "polling");
- p += sprintf(p, " %s %s\n",
- (reg71 & MRDMODE_INTR_CH0) ? "pending" : "clear ",
- (reg71 & MRDMODE_INTR_CH1) ? "pending" : "clear");
- p += sprintf(p, " %s %s\n",
- (reg71 & MRDMODE_BLK_CH0) ? "blocked" : "enabled",
- (reg71 & MRDMODE_BLK_CH1) ? "blocked" : "enabled");
-
- SPLIT_BYTE(reg50, hi_byte, lo_byte);
- p += sprintf(p, "CFR = 0x%02x, HI = 0x%02x, LOW = 0x%02x\n", reg50, hi_byte, lo_byte);
- SPLIT_BYTE(reg57, hi_byte, lo_byte);
- p += sprintf(p, "ARTTIM23 = 0x%02x, HI = 0x%02x, LOW = 0x%02x\n", reg57, hi_byte, lo_byte);
- SPLIT_BYTE(reg71, hi_byte, lo_byte);
- p += sprintf(p, "MRDMODE = 0x%02x, HI = 0x%02x, LOW = 0x%02x\n", reg71, hi_byte, lo_byte);
-
- return p-buffer; /* => must be less than 4k! */
-}
-
-static int cmd680_get_info (char *buffer, char **addr, off_t offset, int count)
-{
- char *p = buffer;
- p += sprintf(p, "\n CMD680 Chipset.\n");
- p += sprintf(p, "--------------- Primary Channel ---------------- Secondary Channel -------------\n");
- p += sprintf(p, "--------------- drive0 --------- drive1 -------- drive0 ---------- drive1 ------\n");
- p += sprintf(p, "PIO Mode: %s %s %s %s\n",
- "?", "?", "?", "?");
- return p-buffer; /* => must be less than 4k! */
-}
-
-#endif /* defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_PROC_FS) */
-
-byte cmd64x_proc = 0;
-byte cmd680_proc = 0;
-
-/*
- * Registers and masks for easy access by drive index:
- */
-#if 0
-static byte prefetch_regs[4] = {CNTRL, CNTRL, ARTTIM23, ARTTIM23};
-static byte prefetch_masks[4] = {CNTRL_DIS_RA0, CNTRL_DIS_RA1, ARTTIM23_DIS_RA2, ARTTIM23_DIS_RA3};
-#endif
-
-/*
- * This routine writes the prepared setup/active/recovery counts
- * for a drive into the cmd646 chipset registers to active them.
- */
-static void program_drive_counts (ide_drive_t *drive, int setup_count, int active_count, int recovery_count)
-{
- unsigned long flags;
- ide_drive_t *drives = HWIF(drive)->drives;
- byte temp_b;
- static const byte setup_counts[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0};
- static const byte recovery_counts[] =
- {15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0};
- static const byte arttim_regs[2][2] = {
- { ARTTIM0, ARTTIM1 },
- { ARTTIM23, ARTTIM23 }
- };
- static const byte drwtim_regs[2][2] = {
- { DRWTIM0, DRWTIM1 },
- { DRWTIM2, DRWTIM3 }
- };
- int channel = (int) HWIF(drive)->channel;
- int slave = (drives != drive); /* Is this really the best way to determine this?? */
-
- cmdprintk("program_drive_count parameters = s(%d),a(%d),r(%d),p(%d)\n", setup_count,
- active_count, recovery_count, drive->present);
- /*
- * Set up address setup count registers.
- * Primary interface has individual count/timing registers for
- * each drive. Secondary interface has one common set of registers,
- * for address setup so we merge these timings, using the slowest
- * value.
- */
- if (channel) {
- drive->drive_data = setup_count;
- setup_count = IDE_MAX(drives[0].drive_data, drives[1].drive_data);
- cmdprintk("Secondary interface, setup_count = %d\n", setup_count);
- }
-
- /*
- * Convert values to internal chipset representation
- */
- setup_count = (setup_count > 5) ? 0xc0 : (int) setup_counts[setup_count];
- active_count &= 0xf; /* Remember, max value is 16 */
- recovery_count = (int) recovery_counts[recovery_count];
-
- cmdprintk("Final values = %d,%d,%d\n", setup_count, active_count, recovery_count);
-
- /*
- * Now that everything is ready, program the new timings
- */
- __save_flags (flags);
- __cli();
- /*
- * Program the address_setup clocks into ARTTIM reg,
- * and then the active/recovery counts into the DRWTIM reg
- */
- (void) pci_read_config_byte(HWIF(drive)->pci_dev, arttim_regs[channel][slave], &temp_b);
- (void) pci_write_config_byte(HWIF(drive)->pci_dev, arttim_regs[channel][slave],
- ((byte) setup_count) | (temp_b & 0x3f));
- (void) pci_write_config_byte(HWIF(drive)->pci_dev, drwtim_regs[channel][slave],
- (byte) ((active_count << 4) | recovery_count));
- cmdprintk ("Write %x to %x\n", ((byte) setup_count) | (temp_b & 0x3f), arttim_regs[channel][slave]);
- cmdprintk ("Write %x to %x\n", (byte) ((active_count << 4) | recovery_count), drwtim_regs[channel][slave]);
- __restore_flags(flags);
-}
-
-/*
- * Attempts to set the interface PIO mode.
- * The preferred method of selecting PIO modes (e.g. mode 4) is
- * "echo 'piomode:4' > /proc/ide/hdx/settings". Special cases are
- * 8: prefetch off, 9: prefetch on, 255: auto-select best mode.
- * Called with 255 at boot time.
- */
-static void cmd64x_tuneproc (ide_drive_t *drive, byte mode_wanted)
-{
- int setup_time, active_time, recovery_time, clock_time, pio_mode, cycle_time;
- byte recovery_count2, cycle_count;
- int setup_count, active_count, recovery_count;
- int bus_speed = system_bus_clock();
- /*byte b;*/
- ide_pio_data_t d;
-
- switch (mode_wanted) {
- case 8: /* set prefetch off */
- case 9: /* set prefetch on */
- mode_wanted &= 1;
- /*set_prefetch_mode(index, mode_wanted);*/
- cmdprintk("%s: %sabled cmd640 prefetch\n", drive->name, mode_wanted ? "en" : "dis");
- return;
- }
-
- mode_wanted = ide_get_best_pio_mode (drive, mode_wanted, 5, &d);
- pio_mode = d.pio_mode;
- cycle_time = d.cycle_time;
-
- /*
- * I copied all this complicated stuff from cmd640.c and made a few minor changes.
- * For now I am just going to pray that it is correct.
- */
- if (pio_mode > 5)
- pio_mode = 5;
- setup_time = ide_pio_timings[pio_mode].setup_time;
- active_time = ide_pio_timings[pio_mode].active_time;
- recovery_time = cycle_time - (setup_time + active_time);
- clock_time = 1000 / bus_speed;
- cycle_count = (cycle_time + clock_time - 1) / clock_time;
-
- setup_count = (setup_time + clock_time - 1) / clock_time;
-
- active_count = (active_time + clock_time - 1) / clock_time;
-
- recovery_count = (recovery_time + clock_time - 1) / clock_time;
- recovery_count2 = cycle_count - (setup_count + active_count);
- if (recovery_count2 > recovery_count)
- recovery_count = recovery_count2;
- if (recovery_count > 16) {
- active_count += recovery_count - 16;
- recovery_count = 16;
- }
- if (active_count > 16)
- active_count = 16; /* maximum allowed by cmd646 */
-
- /*
- * In a perfect world, we might set the drive pio mode here
- * (using WIN_SETFEATURE) before continuing.
- *
- * But we do not, because:
- * 1) this is the wrong place to do it (proper is do_special() in ide.c)
- * 2) in practice this is rarely, if ever, necessary
- */
- program_drive_counts (drive, setup_count, active_count, recovery_count);
-
- cmdprintk("%s: selected cmd646 PIO mode%d : %d (%dns)%s, clocks=%d/%d/%d\n",
- drive->name, pio_mode, mode_wanted, cycle_time,
- d.overridden ? " (overriding vendor mode)" : "",
- setup_count, active_count, recovery_count);
-}
-
-static byte cmd680_taskfile_timing (ide_hwif_t *hwif)
-{
- struct pci_dev *dev = hwif->pci_dev;
- byte addr_mask = (hwif->channel) ? 0xB2 : 0xA2;
- unsigned short timing;
-
- pci_read_config_word(dev, addr_mask, &timing);
-
- switch (timing) {
- case 0x10c1: return 4;
- case 0x10c3: return 3;
- case 0x1281: return 2;
- case 0x2283: return 1;
- case 0x328a:
- default: return 0;
- }
-}
-
-static void cmd680_tuneproc (ide_drive_t *drive, byte mode_wanted)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
- byte drive_pci;
- unsigned short speedt;
-
- switch (drive->dn) {
- case 0: drive_pci = 0xA4; break;
- case 1: drive_pci = 0xA6; break;
- case 2: drive_pci = 0xB4; break;
- case 3: drive_pci = 0xB6; break;
- default: return;
- }
-
- pci_read_config_word(dev, drive_pci, &speedt);
-
- /* cheat for now and use the docs */
-// switch(cmd680_taskfile_timing(hwif)) {
- switch(mode_wanted) {
- case 4: speedt = 0x10c1; break;
- case 3: speedt = 0x10C3; break;
- case 2: speedt = 0x1104; break;
- case 1: speedt = 0x2283; break;
- case 0:
- default: speedt = 0x328A; break;
- }
- pci_write_config_word(dev, drive_pci, speedt);
-}
-
-static void config_cmd64x_chipset_for_pio (ide_drive_t *drive, byte set_speed)
-{
- byte speed = 0x00;
- byte set_pio = ide_get_best_pio_mode(drive, 4, 5, NULL);
-
- cmd64x_tuneproc(drive, set_pio);
- speed = XFER_PIO_0 + set_pio;
- if (set_speed)
- (void) ide_config_drive_speed(drive, speed);
-}
-
-static void config_cmd680_chipset_for_pio (ide_drive_t *drive, byte set_speed)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
- u8 unit = (drive->select.b.unit & 0x01);
- u8 addr_mask = (hwif->channel) ? 0x84 : 0x80;
- u8 speed = 0x00;
- u8 mode_pci = 0x00;
- u8 channel_timings = cmd680_taskfile_timing(hwif);
- u8 set_pio = ide_get_best_pio_mode(drive, 4, 5, NULL);
-
- pci_read_config_byte(dev, addr_mask, &mode_pci);
- mode_pci &= ~((unit) ? 0x30 : 0x03);
-
- /* WARNING PIO timing mess is going to happen b/w devices, argh */
- if ((channel_timings != set_pio) && (set_pio > channel_timings))
- set_pio = channel_timings;
-
- cmd680_tuneproc(drive, set_pio);
- speed = XFER_PIO_0 + set_pio;
- if (set_speed) {
- (void) ide_config_drive_speed(drive, speed);
- drive->current_speed = speed;
- }
-}
-
-static void config_chipset_for_pio (ide_drive_t *drive, byte set_speed)
-{
- if (HWIF(drive)->pci_dev->device == PCI_DEVICE_ID_CMD_680) {
- config_cmd680_chipset_for_pio(drive, set_speed);
- } else {
- config_cmd64x_chipset_for_pio(drive, set_speed);
- }
-}
-
-static int cmd64x_tune_chipset (ide_drive_t *drive, byte speed)
-{
-#ifdef CONFIG_BLK_DEV_IDEDMA
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
- int err = 0;
-
- u8 unit = (drive->select.b.unit & 0x01);
- u8 pciU = (hwif->channel) ? UDIDETCR1 : UDIDETCR0;
- u8 pciD = (hwif->channel) ? BMIDESR1 : BMIDESR0;
- u8 regU = 0;
- u8 regD = 0;
-
- if ((drive->media != ide_disk) && (speed < XFER_SW_DMA_0)) return 1;
-
- (void) pci_read_config_byte(dev, pciD, ®D);
- (void) pci_read_config_byte(dev, pciU, ®U);
- regD &= ~(unit ? 0x40 : 0x20);
- regU &= ~(unit ? 0xCA : 0x35);
- (void) pci_write_config_byte(dev, pciD, regD);
- (void) pci_write_config_byte(dev, pciU, regU);
-
- (void) pci_read_config_byte(dev, pciD, ®D);
- (void) pci_read_config_byte(dev, pciU, ®U);
- switch(speed) {
- case XFER_UDMA_5: regU |= (unit ? 0x0A : 0x05); break;
- case XFER_UDMA_4: regU |= (unit ? 0x4A : 0x15); break;
- case XFER_UDMA_3: regU |= (unit ? 0x8A : 0x25); break;
- case XFER_UDMA_2: regU |= (unit ? 0x42 : 0x11); break;
- case XFER_UDMA_1: regU |= (unit ? 0x82 : 0x21); break;
- case XFER_UDMA_0: regU |= (unit ? 0xC2 : 0x31); break;
- case XFER_MW_DMA_2: regD |= (unit ? 0x40 : 0x10); break;
- case XFER_MW_DMA_1: regD |= (unit ? 0x80 : 0x20); break;
- case XFER_MW_DMA_0: regD |= (unit ? 0xC0 : 0x30); break;
- case XFER_SW_DMA_2: regD |= (unit ? 0x40 : 0x10); break;
- case XFER_SW_DMA_1: regD |= (unit ? 0x80 : 0x20); break;
- case XFER_SW_DMA_0: regD |= (unit ? 0xC0 : 0x30); break;
-#else
- int err = 0;
-
- switch(speed) {
-#endif /* CONFIG_BLK_DEV_IDEDMA */
- case XFER_PIO_4: cmd64x_tuneproc(drive, 4); break;
- case XFER_PIO_3: cmd64x_tuneproc(drive, 3); break;
- case XFER_PIO_2: cmd64x_tuneproc(drive, 2); break;
- case XFER_PIO_1: cmd64x_tuneproc(drive, 1); break;
- case XFER_PIO_0: cmd64x_tuneproc(drive, 0); break;
-
- default:
- return 1;
- }
-
-#ifdef CONFIG_BLK_DEV_IDEDMA
- (void) pci_write_config_byte(dev, pciU, regU);
-#endif /* CONFIG_BLK_DEV_IDEDMA */
-
- err = ide_config_drive_speed(drive, speed);
-
- drive->current_speed = speed;
-
-#ifdef CONFIG_BLK_DEV_IDEDMA
- regD |= (unit ? 0x40 : 0x20);
- (void) pci_write_config_byte(dev, pciD, regD);
-#endif /* CONFIG_BLK_DEV_IDEDMA */
-
- return err;
-}
-
-static int cmd680_tune_chipset (ide_drive_t *drive, byte speed)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
- u8 addr_mask = (hwif->channel) ? 0x84 : 0x80;
- u8 unit = (drive->select.b.unit & 0x01);
- u8 dma_pci = 0;
- u8 udma_pci = 0;
- u8 mode_pci = 0;
- u8 scsc = 0;
- u16 ultra = 0;
- u16 multi = 0;
- int err = 0;
-
- pci_read_config_byte(dev, addr_mask, &mode_pci);
- pci_read_config_byte(dev, 0x8A, &scsc);
-
- switch (drive->dn) {
- case 0: dma_pci = 0xA8; udma_pci = 0xAC; break;
- case 1: dma_pci = 0xAA; udma_pci = 0xAE; break;
- case 2: dma_pci = 0xB8; udma_pci = 0xBC; break;
- case 3: dma_pci = 0xBA; udma_pci = 0xBE; break;
- default: return 1;
- }
-
- pci_read_config_byte(dev, addr_mask, &mode_pci);
- mode_pci &= ~((unit) ? 0x30 : 0x03);
- pci_read_config_word(dev, dma_pci, &multi);
- pci_read_config_word(dev, udma_pci, &ultra);
-
- if ((speed == XFER_UDMA_6) && (scsc & 0x30) == 0x00) {
- pci_write_config_byte(dev, 0x8A, scsc|0x01);
- pci_read_config_byte(dev, 0x8A, &scsc);
- }
-
- switch(speed) {
-#ifdef CONFIG_BLK_DEV_IDEDMA
- case XFER_UDMA_6:
- if ((scsc & 0x30) == 0x00)
- goto speed_break;
- multi = 0x10C1;
- ultra &= ~0x3F;
- ultra |= 0x01;
- break;
-speed_break :
- speed = XFER_UDMA_5;
- case XFER_UDMA_5:
- multi = 0x10C1;
- ultra &= ~0x3F;
- ultra |= (((scsc & 0x30) == 0x00) ? 0x01 : 0x02);
- break;
- case XFER_UDMA_4:
- multi = 0x10C1;
- ultra &= ~0x3F;
- ultra |= (((scsc & 0x30) == 0x00) ? 0x02 : 0x03);
- break;
- case XFER_UDMA_3:
- multi = 0x10C1;
- ultra &= ~0x3F;
- ultra |= (((scsc & 0x30) == 0x00) ? 0x04 : 0x05);
- break;
- case XFER_UDMA_2:
- multi = 0x10C1;
- ultra &= ~0x3F;
- ultra |= (((scsc & 0x30) == 0x00) ? 0x05 : 0x07);
- break;
- case XFER_UDMA_1:
- multi = 0x10C1;
- ultra &= ~0x3F;
- ultra |= (((scsc & 0x30) == 0x00) ? 0x07 : 0x0B);
- break;
- case XFER_UDMA_0:
- multi = 0x10C1;
- ultra &= ~0x3F;
- ultra |= (((scsc & 0x30) == 0x00) ? 0x0C : 0x0F);
- break;
- case XFER_MW_DMA_2:
- multi = 0x10C1;
- break;
- case XFER_MW_DMA_1:
- multi = 0x10C2;
- break;
- case XFER_MW_DMA_0:
- multi = 0x2208;
- break;
-#endif /* CONFIG_BLK_DEV_IDEDMA */
- case XFER_PIO_4: cmd680_tuneproc(drive, 4); break;
- case XFER_PIO_3: cmd680_tuneproc(drive, 3); break;
- case XFER_PIO_2: cmd680_tuneproc(drive, 2); break;
- case XFER_PIO_1: cmd680_tuneproc(drive, 1); break;
- case XFER_PIO_0: cmd680_tuneproc(drive, 0); break;
- default:
- return 1;
- }
-
-
- if (speed >= XFER_MW_DMA_0)
- config_cmd680_chipset_for_pio(drive, 0);
-
- if (speed >= XFER_UDMA_0)
- mode_pci |= ((unit) ? 0x30 : 0x03);
- else if (speed >= XFER_MW_DMA_0)
- mode_pci |= ((unit) ? 0x20 : 0x02);
- else
- mode_pci |= ((unit) ? 0x10 : 0x01);
-
- pci_write_config_byte(dev, addr_mask, mode_pci);
- pci_write_config_word(dev, dma_pci, multi);
- pci_write_config_word(dev, udma_pci, ultra);
-
- err = ide_config_drive_speed(drive, speed);
- drive->current_speed = speed;
- return err;
-}
-
-#ifdef CONFIG_BLK_DEV_IDEDMA
-static int config_cmd64x_chipset_for_dma (ide_drive_t *drive, unsigned int rev, byte ultra_66)
-{
- struct hd_driveid *id = drive->id;
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
-
- byte speed = 0x00;
- byte set_pio = 0x00;
- byte udma_33 = ((rev >= 0x05) || (ultra_66)) ? 1 : 0;
- byte udma_66 = eighty_ninty_three(drive);
- byte udma_100 = 0;
- int rval;
-
- switch(dev->device) {
- case PCI_DEVICE_ID_CMD_649: udma_100 = 1; break;
- case PCI_DEVICE_ID_CMD_648:
- case PCI_DEVICE_ID_CMD_646:
- case PCI_DEVICE_ID_CMD_643:
- default:
- break;
- }
-
- if (drive->media != ide_disk) {
- cmdprintk("CMD64X: drive->media != ide_disk at double check, inital check failed!!\n");
- return ((int) ide_dma_off);
- }
-
- /* UltraDMA only supported on PCI646U and PCI646U2,
- * which correspond to revisions 0x03, 0x05 and 0x07 respectively.
- * Actually, although the CMD tech support people won't
- * tell me the details, the 0x03 revision cannot support
- * UDMA correctly without hardware modifications, and even
- * then it only works with Quantum disks due to some
- * hold time assumptions in the 646U part which are fixed
- * in the 646U2.
- * So we only do UltraDMA on revision 0x05 and 0x07 chipsets.
- */
- if ((id->dma_ultra & 0x0020) && (udma_100) && (udma_66) && (udma_33)) {
- speed = XFER_UDMA_5;
- } else if ((id->dma_ultra & 0x0010) && (udma_66) && (udma_33)) {
- speed = XFER_UDMA_4;
- } else if ((id->dma_ultra & 0x0008) && (udma_66) && (udma_33)) {
- speed = XFER_UDMA_3;
- } else if ((id->dma_ultra & 0x0004) && (udma_33)) {
- speed = XFER_UDMA_2;
- } else if ((id->dma_ultra & 0x0002) && (udma_33)) {
- speed = XFER_UDMA_1;
- } else if ((id->dma_ultra & 0x0001) && (udma_33)) {
- speed = XFER_UDMA_0;
- } else if (id->dma_mword & 0x0004) {
- speed = XFER_MW_DMA_2;
- } else if (id->dma_mword & 0x0002) {
- speed = XFER_MW_DMA_1;
- } else if (id->dma_mword & 0x0001) {
- speed = XFER_MW_DMA_0;
- } else if (id->dma_1word & 0x0004) {
- speed = XFER_SW_DMA_2;
- } else if (id->dma_1word & 0x0002) {
- speed = XFER_SW_DMA_1;
- } else if (id->dma_1word & 0x0001) {
- speed = XFER_SW_DMA_0;
- } else {
- set_pio = 1;
- }
-
- if (!drive->init_speed)
- drive->init_speed = speed;
-
- config_chipset_for_pio(drive, set_pio);
-
- if (set_pio)
- return ((int) ide_dma_off_quietly);
-
- if (cmd64x_tune_chipset(drive, speed))
- return ((int) ide_dma_off);
-
- rval = (int)( ((id->dma_ultra >> 11) & 7) ? ide_dma_on :
- ((id->dma_ultra >> 8) & 7) ? ide_dma_on :
- ((id->dma_mword >> 8) & 7) ? ide_dma_on :
- ((id->dma_1word >> 8) & 7) ? ide_dma_on :
- ide_dma_off_quietly);
-
- return rval;
-}
-
-static int config_cmd680_chipset_for_dma (ide_drive_t *drive)
-{
- struct hd_driveid *id = drive->id;
- byte udma_66 = eighty_ninty_three(drive);
- byte speed = 0x00;
- byte set_pio = 0x00;
- int rval;
-
- if ((id->dma_ultra & 0x0040) && (udma_66)) speed = XFER_UDMA_6;
- else if ((id->dma_ultra & 0x0020) && (udma_66)) speed = XFER_UDMA_5;
- else if ((id->dma_ultra & 0x0010) && (udma_66)) speed = XFER_UDMA_4;
- else if ((id->dma_ultra & 0x0008) && (udma_66)) speed = XFER_UDMA_3;
- else if (id->dma_ultra & 0x0004) speed = XFER_UDMA_2;
- else if (id->dma_ultra & 0x0002) speed = XFER_UDMA_1;
- else if (id->dma_ultra & 0x0001) speed = XFER_UDMA_0;
- else if (id->dma_mword & 0x0004) speed = XFER_MW_DMA_2;
- else if (id->dma_mword & 0x0002) speed = XFER_MW_DMA_1;
- else if (id->dma_mword & 0x0001) speed = XFER_MW_DMA_0;
- else {
- set_pio = 1;
- }
-
- if (!drive->init_speed)
- drive->init_speed = speed;
-
- config_chipset_for_pio(drive, set_pio);
-
- if (set_pio)
- return ((int) ide_dma_off_quietly);
-
- if (cmd680_tune_chipset(drive, speed))
- return ((int) ide_dma_off);
-
- rval = (int)( ((id->dma_ultra >> 14) & 3) ? ide_dma_on :
- ((id->dma_ultra >> 11) & 7) ? ide_dma_on :
- ((id->dma_ultra >> 8) & 7) ? ide_dma_on :
- ((id->dma_mword >> 8) & 7) ? ide_dma_on :
- ((id->dma_1word >> 8) & 7) ? ide_dma_on :
- ide_dma_off_quietly);
- return rval;
-}
-
-static int config_chipset_for_dma (ide_drive_t *drive, unsigned int rev, byte ultra_66)
-{
- if (HWIF(drive)->pci_dev->device == PCI_DEVICE_ID_CMD_680)
- return (config_cmd680_chipset_for_dma(drive));
- return (config_cmd64x_chipset_for_dma(drive, rev, ultra_66));
-}
-
-static int cmd64x_config_drive_for_dma (ide_drive_t *drive)
-{
- struct hd_driveid *id = drive->id;
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = hwif->pci_dev;
- unsigned int class_rev = 0;
- byte can_ultra_33 = 0;
- byte can_ultra_66 = 0;
- byte can_ultra_100 = 0;
- byte can_ultra_133 = 0;
- ide_dma_action_t dma_func = ide_dma_on;
-
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
- class_rev &= 0xff;
-
- switch(dev->device) {
- case PCI_DEVICE_ID_CMD_680:
- can_ultra_133 = 1;
- case PCI_DEVICE_ID_CMD_649:
- can_ultra_100 = 1;
- case PCI_DEVICE_ID_CMD_648:
- can_ultra_66 = 1;
- case PCI_DEVICE_ID_CMD_643:
- can_ultra_33 = 1;
- break;
- case PCI_DEVICE_ID_CMD_646:
- can_ultra_33 = (class_rev >= 0x05) ? 1 : 0;
- can_ultra_66 = 0;
- can_ultra_100 = 0;
- break;
- default:
- return hwif->dmaproc(ide_dma_off, drive);
- }
-
- if ((id != NULL) && ((id->capability & 1) != 0) &&
- hwif->autodma && (drive->media == ide_disk)) {
- /* Consult the list of known "bad" drives */
- if (ide_dmaproc(ide_dma_bad_drive, drive)) {
- dma_func = ide_dma_off;
- goto fast_ata_pio;
- }
- dma_func = ide_dma_off_quietly;
- if ((id->field_valid & 4) && (can_ultra_33)) {
- if (id->dma_ultra & 0x007F) {
- /* Force if Capable UltraDMA */
- dma_func = config_chipset_for_dma(drive, class_rev, can_ultra_66);
- if ((id->field_valid & 2) &&
- (dma_func != ide_dma_on))
- goto try_dma_modes;
- }
- } else if (id->field_valid & 2) {
-try_dma_modes:
- if ((id->dma_mword & 0x0007) ||
- (id->dma_1word & 0x0007)) {
- /* Force if Capable regular DMA modes */
- dma_func = config_chipset_for_dma(drive, class_rev, 0);
- if (dma_func != ide_dma_on)
- goto no_dma_set;
- }
- } else if (ide_dmaproc(ide_dma_good_drive, drive)) {
- if (id->eide_dma_time > 150) {
- goto no_dma_set;
- }
- /* Consult the list of known "good" drives */
- dma_func = config_chipset_for_dma(drive, class_rev, 0);
- if (dma_func != ide_dma_on)
- goto no_dma_set;
- } else {
- goto fast_ata_pio;
- }
- } else if ((id->capability & 8) || (id->field_valid & 2)) {
-fast_ata_pio:
- dma_func = ide_dma_off_quietly;
-no_dma_set:
- config_chipset_for_pio(drive, 1);
- }
- return HWIF(drive)->dmaproc(dma_func, drive);
-}
-
-static int cmd680_dmaproc (ide_dma_action_t func, ide_drive_t *drive)
-{
- switch (func) {
- case ide_dma_check:
- return cmd64x_config_drive_for_dma(drive);
- default:
- break;
- }
- /* Other cases are done by generic IDE-DMA code. */
- return ide_dmaproc(func, drive);
-}
-
-static int cmd64x_dmaproc (ide_dma_action_t func, ide_drive_t *drive)
-{
- byte dma_stat = 0;
- byte dma_alt_stat = 0;
- byte mask = (HWIF(drive)->channel) ? MRDMODE_INTR_CH1 : MRDMODE_INTR_CH0;
- unsigned long dma_base = HWIF(drive)->dma_base;
- struct pci_dev *dev = HWIF(drive)->pci_dev;
- byte jack_slap = ((dev->device == PCI_DEVICE_ID_CMD_648) || (dev->device == PCI_DEVICE_ID_CMD_649)) ? 1 : 0;
-
- switch (func) {
- case ide_dma_check:
- return cmd64x_config_drive_for_dma(drive);
- case ide_dma_end: /* returns 1 on error, 0 otherwise */
- drive->waiting_for_dma = 0;
- outb(inb(dma_base)&~1, dma_base); /* stop DMA */
- dma_stat = inb(dma_base+2); /* get DMA status */
- outb(dma_stat|6, dma_base+2); /* clear the INTR & ERROR bits */
- if (jack_slap) {
- byte dma_intr = 0;
- byte dma_mask = (HWIF(drive)->channel) ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0;
- byte dma_reg = (HWIF(drive)->channel) ? ARTTIM2 : CFR;
- (void) pci_read_config_byte(dev, dma_reg, &dma_intr);
- /*
- * DAMN BMIDE is not connected to PCI space!
- * Have to manually jack-slap that bitch!
- * To allow the PCI side to read incoming interrupts.
- */
- (void) pci_write_config_byte(dev, dma_reg, dma_intr|dma_mask); /* clear the INTR bit */
- }
- ide_destroy_dmatable(drive); /* purge DMA mappings */
- return (dma_stat & 7) != 4; /* verify good DMA status */
- case ide_dma_test_irq: /* returns 1 if dma irq issued, 0 otherwise */
- dma_stat = inb(dma_base+2);
- (void) pci_read_config_byte(dev, MRDMODE, &dma_alt_stat);
-#ifdef DEBUG
- printk("%s: dma_stat: 0x%02x dma_alt_stat: 0x%02x mask: 0x%02x\n", drive->name, dma_stat, dma_alt_stat, mask);
-#endif
- if (!(dma_alt_stat & mask)) {
- return 0;
- }
- return (dma_stat & 4) == 4; /* return 1 if INTR asserted */
- default:
- break;
- }
- /* Other cases are done by generic IDE-DMA code. */
- return ide_dmaproc(func, drive);
-}
-
-/*
- * ASUS P55T2P4D with CMD646 chipset revision 0x01 requires the old
- * event order for DMA transfers.
- */
-static int cmd646_1_dmaproc (ide_dma_action_t func, ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- unsigned long dma_base = hwif->dma_base;
- byte dma_stat;
-
- switch (func) {
- case ide_dma_check:
- return cmd64x_config_drive_for_dma(drive);
- case ide_dma_end:
- drive->waiting_for_dma = 0;
- dma_stat = inb(dma_base+2); /* get DMA status */
- outb(inb(dma_base)&~1, dma_base); /* stop DMA */
- outb(dma_stat|6, dma_base+2); /* clear the INTR & ERROR bits */
- ide_destroy_dmatable(drive); /* and free any DMA resources */
- return (dma_stat & 7) != 4; /* verify good DMA status */
- default:
- break;
- }
-
- /* Other cases are done by generic IDE-DMA code. */
- return ide_dmaproc(func, drive);
-}
-#endif /* CONFIG_BLK_DEV_IDEDMA */
-
-static int cmd680_busproc (ide_drive_t * drive, int state)
-{
-#if 0
- ide_hwif_t *hwif = HWIF(drive);
- u8 addr_mask = (hwif->channel) ? 0xB0 : 0xA0;
- u32 stat_config = 0;
-
- pci_read_config_dword(hwif->pci_dev, addr_mask, &stat_config);
-
- if (!hwif)
- return -EINVAL;
-
- switch (state) {
- case BUSSTATE_ON:
- hwif->drives[0].failures = 0;
- hwif->drives[1].failures = 0;
- break;
- case BUSSTATE_OFF:
- hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
- hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
- break;
- case BUSSTATE_TRISTATE:
- hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
- hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
- break;
- default:
- return 0;
- }
- hwif->bus_state = state;
-#endif
- return 0;
-}
-
-void cmd680_reset (ide_drive_t *drive)
-{
-#if 0
- ide_hwif_t *hwif = HWIF(drive);
- u8 addr_mask = (hwif->channel) ? 0xB0 : 0xA0;
- byte reset = 0;
-
- pci_read_config_byte(hwif->pci_dev, addr_mask, &reset);
- pci_write_config_byte(hwif->pci_dev, addr_mask, reset|0x03);
-#endif
-}
-
-unsigned int cmd680_pci_init (struct pci_dev *dev, const char *name)
-{
- u8 tmpbyte = 0;
- pci_write_config_byte(dev, 0x80, 0x00);
- pci_write_config_byte(dev, 0x84, 0x00);
- pci_read_config_byte(dev, 0x8A, &tmpbyte);
- pci_write_config_byte(dev, 0x8A, tmpbyte|0x01);
- pci_write_config_word(dev, 0xA2, 0x328A);
- pci_write_config_dword(dev, 0xA4, 0x328A);
- pci_write_config_dword(dev, 0xA8, 0x4392);
- pci_write_config_dword(dev, 0xAC, 0x4009);
- pci_write_config_word(dev, 0xB2, 0x328A);
- pci_write_config_dword(dev, 0xB4, 0x328A);
- pci_write_config_dword(dev, 0xB8, 0x4392);
- pci_write_config_dword(dev, 0xBC, 0x4009);
-
-#if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_PROC_FS)
- if (!cmd64x_proc) {
- cmd64x_proc = 1;
- bmide_dev = dev;
- cmd64x_display_info = &cmd680_get_info;
- }
-#endif /* DISPLAY_CMD64X_TIMINGS && CONFIG_PROC_FS */
- return 0;
-}
-
-unsigned int cmd64x_pci_init (struct pci_dev *dev, const char *name)
-{
- unsigned char mrdmode;
- unsigned int class_rev;
-
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
- class_rev &= 0xff;
-
-#ifdef __i386__
- if (dev->resource[PCI_ROM_RESOURCE].start) {
- pci_write_config_byte(dev, PCI_ROM_ADDRESS, dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
- printk("%s: ROM enabled at 0x%08lx\n", name, dev->resource[PCI_ROM_RESOURCE].start);
- }
-#endif
-
- switch(dev->device) {
- case PCI_DEVICE_ID_CMD_643:
- break;
- case PCI_DEVICE_ID_CMD_646:
- printk("%s: chipset revision 0x%02X, ", name, class_rev);
- switch(class_rev) {
- case 0x07:
- case 0x05:
- printk("UltraDMA Capable");
- break;
- case 0x03:
- printk("MultiWord DMA Force Limited");
- break;
- case 0x01:
- default:
- printk("MultiWord DMA Limited, IRQ workaround enabled");
- break;
- }
- printk("\n");
- break;
- case PCI_DEVICE_ID_CMD_648:
- case PCI_DEVICE_ID_CMD_649:
- break;
- default:
- break;
- }
-
- /* Set a good latency timer and cache line size value. */
- (void) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
-#ifdef __sparc_v9__
- (void) pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x10);
-#endif
-
-
- /* Setup interrupts. */
- (void) pci_read_config_byte(dev, MRDMODE, &mrdmode);
- mrdmode &= ~(0x30);
- (void) pci_write_config_byte(dev, MRDMODE, mrdmode);
-
- /* Use MEMORY READ LINE for reads.
- * NOTE: Although not mentioned in the PCI0646U specs,
- * these bits are write only and won't be read
- * back as set or not. The PCI0646U2 specs clarify
- * this point.
- */
- (void) pci_write_config_byte(dev, MRDMODE, mrdmode | 0x02);
-
- /* Set reasonable active/recovery/address-setup values. */
- (void) pci_write_config_byte(dev, ARTTIM0, 0x40);
- (void) pci_write_config_byte(dev, DRWTIM0, 0x3f);
- (void) pci_write_config_byte(dev, ARTTIM1, 0x40);
- (void) pci_write_config_byte(dev, DRWTIM1, 0x3f);
-#ifdef __i386__
- (void) pci_write_config_byte(dev, ARTTIM23, 0x1c);
-#else
- (void) pci_write_config_byte(dev, ARTTIM23, 0x5c);
-#endif
- (void) pci_write_config_byte(dev, DRWTIM23, 0x3f);
- (void) pci_write_config_byte(dev, DRWTIM3, 0x3f);
-#ifdef CONFIG_PPC
- (void) pci_write_config_byte(dev, UDIDETCR0, 0xf0);
-#endif /* CONFIG_PPC */
-
-#if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_PROC_FS)
- if (!cmd64x_proc) {
- cmd64x_proc = 1;
- bmide_dev = dev;
- cmd64x_display_info = &cmd64x_get_info;
- }
-#endif /* DISPLAY_CMD64X_TIMINGS && CONFIG_PROC_FS */
-
- return 0;
-}
-
-unsigned int __init pci_init_cmd64x (struct pci_dev *dev, const char *name)
-{
- if (dev->device == PCI_DEVICE_ID_CMD_680)
- return cmd680_pci_init (dev, name);
- return cmd64x_pci_init (dev, name);
-}
-
-unsigned int cmd680_ata66 (ide_hwif_t *hwif)
-{
- byte ata66 = 0;
- byte addr_mask = (hwif->channel) ? 0xB0 : 0xA0;
-
- pci_read_config_byte(hwif->pci_dev, addr_mask, &ata66);
- return (ata66 & 0x01) ? 1 : 0;
-}
-
-unsigned int cmd64x_ata66 (ide_hwif_t *hwif)
-{
- byte ata66 = 0;
- byte mask = (hwif->channel) ? 0x02 : 0x01;
-
- pci_read_config_byte(hwif->pci_dev, BMIDECSR, &ata66);
- return (ata66 & mask) ? 1 : 0;
-}
-
-unsigned int __init ata66_cmd64x (ide_hwif_t *hwif)
-{
- struct pci_dev *dev = hwif->pci_dev;
- if (dev->device == PCI_DEVICE_ID_CMD_680)
- return cmd680_ata66(hwif);
- return cmd64x_ata66(hwif);
-}
-
-void __init ide_init_cmd64x (ide_hwif_t *hwif)
-{
- struct pci_dev *dev = hwif->pci_dev;
- unsigned int class_rev;
-
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
- class_rev &= 0xff;
-
- hwif->drives[0].autotune = 1;
- hwif->drives[1].autotune = 1;
-
- if (!hwif->dma_base)
- return;
-
-#ifdef CONFIG_BLK_DEV_IDEDMA
- switch(dev->device) {
- case PCI_DEVICE_ID_CMD_680:
- hwif->busproc = &cmd680_busproc;
- hwif->dmaproc = &cmd680_dmaproc;
- hwif->resetproc = &cmd680_reset;
- hwif->speedproc = &cmd680_tune_chipset;
- hwif->tuneproc = &cmd680_tuneproc;
- break;
- case PCI_DEVICE_ID_CMD_649:
- case PCI_DEVICE_ID_CMD_648:
- case PCI_DEVICE_ID_CMD_643:
- hwif->dmaproc = &cmd64x_dmaproc;
- hwif->tuneproc = &cmd64x_tuneproc;
- hwif->speedproc = &cmd64x_tune_chipset;
- break;
- case PCI_DEVICE_ID_CMD_646:
- hwif->chipset = ide_cmd646;
- if (class_rev == 0x01) {
- hwif->dmaproc = &cmd646_1_dmaproc;
- } else {
- hwif->dmaproc = &cmd64x_dmaproc;
- }
- hwif->tuneproc = &cmd64x_tuneproc;
- hwif->speedproc = &cmd64x_tune_chipset;
- break;
- default:
- break;
- }
-#endif /* CONFIG_BLK_DEV_IDEDMA */
-}
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)