patch-2.4.21 linux-2.4.21/drivers/hotplug/cpqphp_core.c

• Lines: 110
• Date: 2003-06-13 07:51:33.000000000 -0700
• Orig file: linux-2.4.20/drivers/hotplug/cpqphp_core.c
• Orig date: 2002-11-28 15:53:12.000000000 -0800

diff -urN linux-2.4.20/drivers/hotplug/cpqphp_core.c linux-2.4.21/drivers/hotplug/cpqphp_core.c
@@ -24,6 +24,9 @@
  *
  * Send feedback to <greg@kroah.com>
  *
+ * Jan 12, 2003 -	Added 66/100/133MHz PCI-X support, 
+ * 			Torben Mathiasen <torben.mathiasen@hp.com>
+ *
  */
 
 #include <linux/config.h>
@@ -53,7 +56,7 @@
 static u8 power_mode;
 static int debug;
 
-#define DRIVER_VERSION	"0.9.6"
+#define DRIVER_VERSION	"0.9.7"
 #define DRIVER_AUTHOR	"Dan Zink <dan.zink@compaq.com>, Greg Kroah-Hartman <greg@kroah.com>"
 #define DRIVER_DESC	"Compaq Hot Plug PCI Controller Driver"
 
@@ -829,6 +832,7 @@
 	u8 hp_slot = 0;
 	u8 device;
 	u8 rev;
+	u8 bus_cap;
 	u16 temp_word;
 	u16 vendor_id;
 	u16 subsystem_vid;
@@ -890,6 +894,39 @@
 
 		switch (subsystem_vid) {
 			case PCI_VENDOR_ID_COMPAQ:
+				if (rev >= 0x13) { /* CIOBX */
+					ctrl->push_flag = 1;
+					ctrl->slot_switch_type = 1;		// Switch is present
+					ctrl->push_button = 1;			// Pushbutton is present
+					ctrl->pci_config_space = 1;		// Index/data access to working registers 0 = not supported, 1 = supported
+					ctrl->defeature_PHP = 1;		// PHP is supported
+					ctrl->pcix_support = 1;			// PCI-X supported
+					ctrl->pcix_speed_capability = 1;
+					pci_read_config_byte(pdev, 0x41, &bus_cap);
+					if (bus_cap & 0x80) {
+						dbg("bus max supports 133MHz PCI-X\n");
+						ctrl->speed_capability = PCI_SPEED_133MHz_PCIX;
+						break;
+					}
+					if (bus_cap & 0x40) {
+						dbg("bus max supports 100MHz PCI-X\n");
+						ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
+						break;
+					}
+					if (bus_cap & 20) {
+						dbg("bus max supports 66MHz PCI-X\n");
+						ctrl->speed_capability = PCI_SPEED_66MHz_PCIX;
+						break;
+					}
+					if (bus_cap & 10) {
+						dbg("bus max supports 66MHz PCI\n");
+						ctrl->speed_capability = PCI_SPEED_66MHz;
+						break;
+					}
+
+					break;
+				}
+
 				switch (subsystem_deviceid) {
 					case PCI_SUB_HPC_ID:
 						/* Original 6500/7000 implementation */
@@ -933,8 +970,18 @@
 						ctrl->pcix_support = 0;			// PCI-X not supported
 						ctrl->pcix_speed_capability = 0;	// N/A since PCI-X not supported
 						break;
+					case PCI_SUB_HPC_ID4:
+						/* First PCI-X implementation, 100MHz */
+						ctrl->push_flag = 1;
+						ctrl->slot_switch_type = 1;		// Switch is present
+						ctrl->speed_capability = PCI_SPEED_100MHz_PCIX;
+						ctrl->push_button = 1;			// Pushbutton is present
+						ctrl->pci_config_space = 1;		// Index/data access to working registers 0 = not supported, 1 = supported
+						ctrl->defeature_PHP = 1;		// PHP is supported
+						ctrl->pcix_support = 1;			// PCI-X supported
+						ctrl->pcix_speed_capability = 0;	
+						break;
 					default:
-						// TODO: Add SSIDs for CPQ systems that support PCI-X
 						err(msg_HPC_not_supported);
 						rc = -ENODEV;
 						goto err_free_ctrl;
@@ -1023,7 +1070,7 @@
 	info("Initializing the PCI hot plug controller residing on PCI bus %d\n", pdev->bus->number);
 
 	dbg ("Hotplug controller capabilities:\n");
-	dbg ("    speed_capability       %s\n", ctrl->speed_capability == PCI_SPEED_33MHz ? "33MHz" : "66Mhz");
+	dbg ("    speed_capability       %d\n", ctrl->speed_capability);
 	dbg ("    slot_switch_type       %s\n", ctrl->slot_switch_type == 0 ? "no switch" : "switch present");
 	dbg ("    defeature_PHP          %s\n", ctrl->defeature_PHP == 0 ? "PHP not supported" : "PHP supported");
 	dbg ("    alternate_base_address %s\n", ctrl->alternate_base_address == 0 ? "not supported" : "supported");
@@ -1066,11 +1113,9 @@
 		goto err_free_mem_region;
 	}
 
-	// Check for 66Mhz operation
-	// TODO: Add PCI-X support
+	// Check for 66Mhz and/or PCI-X operation
 	ctrl->speed = get_controller_speed(ctrl);
-
-
+	
 	//**************************************************
 	//
 	//              Save configuration headers for this and