patch-2.4.21 linux-2.4.21/arch/ppc/boot/include/mpc10x.h

Next file: linux-2.4.21/arch/ppc/boot/include/nonstdio.h
Previous file: linux-2.4.21/arch/ppc/boot/common/util.S
Back to the patch index
Back to the overall index

diff -urN linux-2.4.20/arch/ppc/boot/include/mpc10x.h linux-2.4.21/arch/ppc/boot/include/mpc10x.h
@@ -0,0 +1,67 @@
+/*
+ * arch/ppc/boot/include/mpc10.h
+ *
+ * Common defines for the Motorola SPS MPC106/8240/107 Host bridge/Mem
+ * ctrl/EPIC/etc.
+ *
+ * Author: Tom Rini <trini@mvista.com>
+ *
+ * This is a heavily stripped down version of:
+ * include/asm-ppc/mpc10x.h
+ *
+ * Author: Mark A. Greer
+ *         mgreer@mvista.com
+ *
+ * Copyright 2001-2002 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef __BOOT_MPC10X_H__
+#define __BOOT_MPC10X_H__
+
+/*
+ * The values here don't completely map everything but should work in most
+ * cases.
+ *
+ * MAP A (PReP Map)
+ *   Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff
+ *   Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff
+ *   PCI MEM:   0x80000000 -> Processor System Memory: 0x00000000
+ *   EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
+ *
+ * MAP B (CHRP Map)
+ *   Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff
+ *   Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff
+ *   PCI MEM:   0x00000000 -> Processor System Memory: 0x00000000
+ *   EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
+ */
+
+/* Define the type of map to use */
+#define	MPC10X_MEM_MAP_A		1
+#define	MPC10X_MEM_MAP_B		2
+
+/* Map A (PReP Map) Defines */
+#define	MPC10X_MAPA_CNFG_ADDR		0x80000cf8
+#define	MPC10X_MAPA_CNFG_DATA		0x80000cfc
+
+/* Map B (CHRP Map) Defines */
+#define	MPC10X_MAPB_CNFG_ADDR		0xfec00000
+#define	MPC10X_MAPB_CNFG_DATA		0xfee00000
+
+/* Define offsets for the memory controller registers in the config space */
+#define MPC10X_MCTLR_MEM_START_1	0x80	/* Banks 0-3 */
+#define MPC10X_MCTLR_MEM_START_2	0x84	/* Banks 4-7 */
+#define MPC10X_MCTLR_EXT_MEM_START_1	0x88	/* Banks 0-3 */
+#define MPC10X_MCTLR_EXT_MEM_START_2	0x8c	/* Banks 4-7 */
+
+#define MPC10X_MCTLR_MEM_END_1		0x90	/* Banks 0-3 */
+#define MPC10X_MCTLR_MEM_END_2i		0x94	/* Banks 4-7 */
+#define MPC10X_MCTLR_EXT_MEM_END_1	0x98	/* Banks 0-3 */
+#define MPC10X_MCTLR_EXT_MEM_END_2	0x9c	/* Banks 4-7 */
+
+#define MPC10X_MCTLR_MEM_BANK_ENABLES	0xa0
+
+#endif	/* __BOOT_MPC10X_H__ */

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)