DosLynx v0.8 Alpha Release Information

Contents:

• Introduction
• System Requirements
• Obtaining DosLynx
• Required Files
• Installing DosLynx
• Installing DosLynx with SLIP/PPP
• Configuring DosLynx
• Command Line Options
• Using DosLynx
• Special Notes on Usage
• New DosLynx Features
• Distributing DosLynx
• Credits

DosLynx is a distributed hypertext browser with some World Wide Web capabilities.

This file provides information about installing, configuring, and using DosLynx v0.8a.

DosLynx is copyrighted by the University of Kansas and is free for instructional and research educational use. Non-educational use will be licensed at a later date.

DosLynx is available in its source and binary forms.

System Requirements

The known system requirements are:

CPU

8086 compatible.

Memory

512 kilobytes free or more recommended.

Hard Drive

Required. 2 megabytes free or more recommended.

Monitor

Monochrome, Black and White, and Color supported.

Graphics capability

Optional.

Mouse

Optional.

Network

None, or Class 1 (ethernet) packet driver connected to a TCP/IP network. You may, of course, emulate a Class 1 packet driver if you have the required software for your particular system (i.e. PPP, ODI, SLIP, etc).

DOS

Versions below 3.0 will not work properly.

Obtaining DosLynx

URL notation is ftp://ftp2.cc.ukans.edu/pub/WWW/DosLynx/DLX0_8A.EXE

DosLynx will be updated periodically as new changes are made to the application. You will be able to find the new versions via binary anonymous FTP to ftp2.cc.ukans.edu in the pub/WWW/DosLynx directory under an appropriately named archive.

URL notation for the directory is ftp://ftp2.cc.ukans.edu/pub/WWW/DosLynx/

Required Files

DOSLYNX.EXE

The DosLynx v0.8a executable.

DOSLYNX.CFG

The DosLynx v0.8a configuration file.

README.HTM

The HTML equivalent of this file.

README.TXT

The text equivalent of this file.

ERROR.HTM

The default DosLynx HTML error page.

HOTLIST.HTM

The default DosLynx HTML hotlist.

Obtain a copy of DosLynx and place it in an appropriately named directory on your hard drive.

Enter the command "DLX0_8A" from your DOS prompt in the directory which you placed the DosLynx v0.8a archive.

The required files should be written by the self-extracting archive into the directory. You may now remove the DLX0_8A.EXE from the directory if you wish by entering the command "del DLX0_8A.EXE".

DosLynx comes with a built-in TCP/IP stack (Waterloo TCP/IP). So for those users with a TCP/IP stack already loaded (such as Lan Workplace for DOS) you will need to configure your computer so that you can unload the TCP/IP stack at your convienience. When you are ready to run DosLynx, you must first unload your TCP/IP stack; for LWP, the command is "tcpip /u". Next, if need be, load a packet driver emulator for your system configuration. You should now be ready to run DosLynx. After using DosLynx, you may want to return your system to its previous configuration. Do this by unloading the packet driver emulator if one was loaded. Load your TCP/IP stack again to finish this process.

If your computer does not use a packet driver, which DosLynx requires to access the network, ask your local network administrator if there is a packet driver emulator available for your particular workstation configuration. For those systems using ODI driver (eg. Novell's LAN Workplace) the packet driver emulator is ODIPKT which can be found at ftp://ftp2.cc.ukans.edu/pub/WWW/DosLynx/support. Download net.cfg, odipkt.doc and odipkt.com files.And those using NDIS driver (eg. PC-NFS, BANYAN VINES) the packet driver emulator is DIS_PKT9 which can be found at ftp://ftp2.cc.ukans.edu/pub/WWW/DosLynx/support/dis_pkt9.zip. DON'T forget to unload any TCP/IP stack already installed on your system before running DosLynx.

A collection of packet drivers can be found at Crynwr Software .

If you want to know more about packet drivers and packet driver emulators, read this FAQ .

Installing DosLynx with SLIP/PPP

• 1. Edit doslynx.cfg file. There are two ways of allocating IP # to your computer.

  Statically

  An IP # is given to your computer when you get a SLIP/PPP account. This number is fixed, it doesn't change. In this case set "my_ip" variable in doslynx.cfg file to the IP # given to you.

  Dynamically

  An IP # is allocated to your computer whenever you dial-in. If the terminal server is using BOOTP server to allocated IP #s (ask your network provider about this) then set "my_ip" to "BOOTP". If the terminal server is using any other server than BOOTP, then DosLynx can't grab the IP # automatically, you need to edit doslynx.cfg file with the new IP # every time you make a SLIP/PPP connection.

• 2. Dial-in to the terminal server using the dial-in program.
• 3. Enter SLIP/PPP mode. How to enter? Well, it depends on your terminal server. Ask your network provider.
• 4. Come out of the dial-in program without breaking the connection. In the case of kermit dial-in program the command to do this is "ALT x" (press ALT and x keys simultaneosly).
• 5. Load the SLIP/PPP driver.
• 6. Now you are ready to use DosLynx.

Command Line Options

/B

This option will hide the clock, socket activity, free free temporary disk space, free heap space, and message window for the duration of the current DosLynx session. This option was added to not clutter the screen for blind users as this causes some problems with screen readers, but makes for an all around cleaner display for all users if you wish to use /B.

/P

This is the most important command line option. If you will be executing DosLynx from a directory other than the one you installed DosLynx in, you must use the /P option. /P specifies the directory in which DosLynx may find its configuration file DOSLYNX.CFG and the errorhtml file ERROR.HTM. If you installed DosLynx in the directory C:\DLX then you should use the /P option as follows:

doslynx /PC:\DLX

To avoid having to retype the /P option every time you wish to use DosLynx, create a DOS batch file automatically specifying the /P option for you and place the batch file a directory specified in your DOS PATH environment variable.

/T

This option specifies the temporary directory where DosLynx will create its temporary files. If you wanted to use the directory C:\TEMP as the place to store temporary files, then you would use /T in the following manner:

doslynx /TC:\TEMP\

/L

This option tells DosLynx how many loaded documents to keep in memory before it starts releasing the oldest unviewed file. If you wanted DosLynx to keep the last 5 ready in memory, then you would use the /L option in the follwing way:

doslynx /L5

/V

This option tells DosLynx what text mode to begin in. /VLOW tells DosLynx to use the 25 row text mode. /VHIGH tells DosLynx to attempt to use the 43 or 50 row text modes available to EGA and VGA compatible video adapters.

/H

This option tells DosLynx if it should load the home page you specified in the configuration file. /HON tells DosLynx to load the home page on startup. /HOFF tells DosLynx to not load the home page on startup. /HOFF is automatically assumed if you also use a URL on the command line unless /HON follows the command line URL.

/N

This option tells DosLynx if it will allow network access. To turn off network access, use /NNO. To allow network access, use /NYES.

URL

This command line option is actually any URL that you would like DosLynx to load from the command line. It can be any valid URL or it can be a DOS path to a file. Once a URL is specified on the command line, your home page will not be loaded unless you also append the /HON to your command line following the URL. To have DosLynx load this document on startup, execute one of the following commands from the directory in which you installed DosLynx:

doslynx readme.htm

doslynx file:///readme.htm

A user has several ways to activate the DosLynx menu; pressing F10, pressing ALT and one of the highlighted menu letters, and by a single left button mouse click.

Following are a listing of all menu items and their functionality. Menu titles and the appropriate menu choice are presented side by side with the '|' character as a separator.

File|Open URL

Allows you to enter a user specified URL. Once entered, DosLynx will attempt to load the URL.

File|Open Local

Allows you to select a local file from an available DOS path. DosLynx will convert the file name into a URL and attempt to load the file.

File|Close

When this menu item is selected, DosLynx will close the currently active window so that it is no longer viewable on your display.

File|Save Rendering

When selected, DosLynx will prompt you for a local file name in which to save the document in the currently active window as ASCII text exactly as seen on your display.

File|Print Rendering

When selected, DosLynx will prompt you for a DOS device to which to print the rendering. The appropriate DOS device to enter is the one to which your line printer is connected, such as LPT1.

File|Dos Shell

DosLynx spawns your command interpreter so that you may take action outside of DosLynx while it is still running. After selecting this item, you should always exit the command interpreter and return to DosLynx after you are finished.

File|Exit

This will cause the DosLynx application to exit therefore ending your session inside DosLynx.

Navigate|Find

Allows you to enter a search string that DosLynx will find in your currently active window.

Navigate|Find Again

DosLynx will again find the last entered search string from the find command.

Navigate|Next Anchor

This will move you to the next selectable anchor in the active window.

Navigate|Previous Anchor

This will move you to the previous selectable anchor in the active window.

Navigate|Activate Anchor

This will cause DosLynx to attempt to load the destination URL of the currently active anchor.

Navigate|Prior Document

This will cause DosLynx to attempt to load the last visited URL in the currently active window.

Navigate|Search Index

Some loaded documents are searchable indexes. To cause DosLynx to search the index of the currently active window, select this command. This command will not be active if the window contains no searchable index.

Navigate|Show Destination URL

Select this if you desire to view the URL of the currently active anchor.

Options|Toggle Low/High Text Mode

Allows you to switch back and forth between the default 25 line text mode and the 43 or 50 line text mode of EGA or VGA video adapters.

Window|Messages

This will cause the window containing all DosLynx message to appear as the active window.

Window|Clone Window

Use this if you wish to create a duplicate of the currently active window. The window should be the same in every respect except for window number and size.

Window|Zoom

Use this command to switch a window to its maximum possible size and its previous size before Zoom.

Window|Cascade

Use this command to organize all open windows in a cascading arrangement on your display.

Window|Tile

Use this command to organize all open windows in a tiled arrangement on your display.

Hotlist|View

This command causes DosLynx to load the user specified HotList file for easy access to anchors which you speicify.

Hotlist|Add current to Hotlist

This command will add the URL of the currently active window to your hotlist file and then prompt you for a name by which to remember the URL.

Hotlist|Home Page

Use this command to open a new window with the user specified home page loaded within.

Help|About DosLynx

Miscellaneous information regarding DosLynx.

Help|Mail Developer

Use this command to send a suggestion or bug report to the developer of DosLynx if you are connected to a network.

All hotkey equivalents are listed beside the menu choices while running DosLynx.

In addition to the listed keys, you can use the UNIX vi keys (HJKL) or your numeric keypad with your number lock on for anchor navigation. This differs from the 0.7a release of DosLynx that allowed the user to use the Lynx arrow keys for anchor navigation which is no longer supported as the arrow keys are reserved for scrolling only.

Page up, page down, the arrow keys, and the space bar allow you to look through a document that is longer than your display itself. Further, if you utilize a mouse with DosLynx, you can select an anchor by using a single left button click, and activate an anchor by using a double left button click. A special case arises when attempting to select an inline image which also is has a destination; see the Special Notes section.

Items contained in the status bar (the bottom line of your screen while running DosLynx) correlate directly with items in the navigate menu which are selectable by the mouse only. In addition, the right mouse button is the same as issuing the Window|Clone Window command.

Special Notes on Usage

	file
	ftp
	gopher
	http
	news
	wais

When attempting to select an inline image with a mouse, it may not work as you expect. Some inline images also have destinations, in which case you will be taken to that destination. Use the keyboard to specifically select an inline image which also has a destination.

For the best DosLynx performance, specify the temporary file directory in your configuration file or on the command line to be a directory on a RAMDRIVE. See your DOS documentation for setting up a RAMDRIVE specific to your system.

DosLynx is a MDI (multiple document interface) application. This may confuse new users that are used to other World Wide Web clients. As a rule of thumb, when you open any URL or document through DosLynx's menu or equivalent hotkeys, then it will exists in it's very own window. Windows are numbered in their upper right corner and you can switch between windows by pressing the ALT key and the window number simultaneously.

Each window represents an open file at any given time. If you open more windows than you have FILES specified in your CONFIG.SYS file then DosLynx may crash. Increase the number of open files your machine can have if you plan to use multiple windows a lot.

When DosLynx has used most of your computer's memory attempting to use the File|Dos Shell command will not work. Your computer simply does not have enough memory to execute your command interpretor.

When you ftp a file or activate an anchor that DosLynx cannot display as text, you are asked to give a file name to save the information in; a filename is now suggested by DosLynx. These files are not removed by DosLynx when you exit the application. This allows you as the user to do what you will with such files after exiting DosLynx. If you are prompted to save a file that is already on your hard drive (such as a local image) do not use the same name in the same directory. This option is being left in since some users may wish to use DosLynx on a LAN and copy the selected files to their workstation's hard drive.

DosLynx has been known to crash when it encounters a file containing a large number of selectable anchors in it. This is due to an unavoidable memory limitation. Large files with few anchors will be loaded fine. Future releases of DosLynx will address this problem in a more stable manner.

When DosLynx terminates unexpectedly, the temporary files it creates remain in the temporary file directory you specified in the configuration file or on the command line. The temporary files follow the pattern of DLX*.$$$. You will have to remove these files yourself if this occurs. As DosLynx is improved upon you can expect it to become a more stable application and prevent you from having to worry about this temporary file problem.

If you are wondering, the menu bar contains the current time in the upper right had corner. In the status bar are three numbers in the lower right corner. The numbers are from left to right the current network activity in bytes, the size in bytes of the temporary drive you specified, and the amount of available heap memory in bytes. These were originally run-time debugging tools for the developer of DosLynx but were left in as they are harmless and give the user some information of what is currently happening when DosLynx is at work. They can be turned off with the /B command line option.

Once one program is utilizing your computer's packet driver, like DosLynx, no other program may do so at the same time. If you have need to run more than one packet driver utilizing program at the same time, we suggest asking your local network administrator if your computer can be configured to use a packet multiplexor. If so, you will need to find a suitable packet multiplexor and install it on your computer.

To correctly view the ISO Latin I characters supported by HTML, you must configure DOS to use multilingual code page of 850. Consult your DOS manuals on how to specify the appropriate code page for your computer.

To force DosLynx into a supported black and white video mode, type "mode BW80" at your DOS prompt. Consider doing this if you monitor is black and white but DosLynx considers it a color monitor (monochrome EGA monitors).

If you are interested in registering with the DosLynx development listserv group, send a mail message to listserv@ukanaix.cc.ukans.edu. Please do not send subscribe requests to the doslynx-dev list directly. In the body of the message, send only the following information where username@node is your internet mailing address:

		subscribe doslynx-dev Your Name Here

Inline Images

DosLynx can now download any inline image and display inline GIFs.

Blind Support

The /B command line option was implemented to aid blind users using DosLynx with a screen reader.

Mail Developer

The mail developer command now takes much less time to send the message you enter, and no longer hangs your computer.

Local GIFs

Local GIFs will now load correctly.

Suggested Filenames

DosLynx will now suggest a filename when prompting the user to save a file.

Credits

	Generous financial assistance given by O'Reilly and Associates
		and Intel Corporation.
	Fundamental GIF display routines by David Koblas
	GIF support and dithering routines by Thomas Boutell
	World Wide Web Source Library by CERN
	Waterloo TCP by Erick Engelke
	FTP code from James W. Matthews, Dartmouth Software Development
	Borland C/C++ and TurboVision by Borland International

Borland C/C++ and TurboVision

Trademarks of and Copyright by Borland International.

World Wide Web Source Library

Copyright by CERN, Geneva, Switzeralnd.

Waterloo TCP Library

Copyright by Erick Engelke.

FTP code

Portions Copyright 1994 Trustees by Dartmouth College.

GIF display routines

Copyright by David Koblas along with the following notice:

/* +-------------------------------------------------------------------+ */
/* | Copyright 1990, David Koblas.                                     | */
/* |   Permission to use, copy, modify, and distribute this software   | */
/* |   and its documentation for any purpose and without fee is hereby | */
/* |   granted, provided that the above copyright notice appear in all | */
/* |   copies and that both that copyright notice and this permission  | */
/* |   notice appear in supporting documentation.  This software is    | */
/* |   provided "as is" without express or implied warranty.           | */
/* +-------------------------------------------------------------------+ */